Tender for Tender for Wooden Flooring Work Of Badminton Court Located In Durgakund Ward.
Tender Value
42.36 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
4 days left
EMD
85000
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jaunpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Wooden Flooring Work Of Badminton Court Located In Durgakund Ward.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms for all lift including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. DSR Code No. 2.8.1 all soil(260.30x0.735) |
| 2 | E/W in filling or cutting in ordinary soil including cortage of earth all as per S.I.no.253 |
| 3 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 ded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.8 (6812x0.735) |
| 4 | Providing and laying of Interlocking concrete block pavement having thickness 80 mm including leveling and dressing of surface To required level and slope spreading and moisting 30 m.m thick local sand on bend filling joints with local sand etc. for proper complition of work as per drawing and technical specification clause 1504 |
| 5 | 1:2:4 (1 cement:2 coarse sand:(zone-III) derived from natural sourse: 4 graded stone aggregate 20 mm niminal size derived from natural sourse) DSR code no. 4.1.3 @ 7878.50x0.735 |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand) DSR code no. 6.1.2 (7132.25 x0.735) |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)DSR code no.6.4.2 (9105.95 x0.735) |
| 8 | Half brick masonary with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth levelup to floor V level in cement mortar 1:4 as per DSR code no.6.13.2 @1123.80x0.735 |
| 9 | 12 mm thick cement plaster mix 1:cement :4 Fine sand DSR Code no. 13.1 @ 347.05x0.735 |
| 10 | Using R4 series with frame (64 mm & above)x (45mm & above) & sash (44mm & Above) x (55mm & Above) with zinc alloy (zamak) powder coated handal on every panel along with multi- point locking system (Height Above 1.8m). DSR CODE NO. 9.147.A1.3 Rate 9628.60x0.735 |
| 11 | Reinforeed cement concrete work in beams ,suspended floors,roofshaving slope up to15 landing,balconies and spiral stair cases above plinthlevel up to floor five level ,excluding the cost of centering shuttering ,finishing and reinforcement with 1:1.5:3(1cement:1.5 coarses and (zone-lll) derived from natural sorceses 3graded stone aggregate 20mm nominal size dreived from natural sourses )DSR5.3(11505.50x0.735) |
| 12 | centering and shuttering includingsturutting propping etcand removal of form for suspended floors ,roofs,landings,balconies and platform (927.25x0.735) |
| 13 | Steel reinforcement for R.C.C. work including straightening,cutting ,bending,placing in position and binding all complete upto plinth level TMT bars of grade Fe-500D or more DSR code no. 5.22.3(107.85x0.735) |
| 14 | providing and laying polished granite stone flooring in required design and patterns in linear as well as curvlinear portion of building all complete as per the architectural drawing with 18 mm thick stone slab over 20mm (average) thick base of cement mortar 1:4 laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing curing slurry admixed with pigment of matching shade including rubbing curing and polishing etc all complete as specified and as directed by the Engineer-in - charge as per DSR code no. 11.56.1 @ 4481.30x0.735 |
| 15 | Steel work in built-up Tubular(,round,square or rectangular hallow tube etc ) trusses etc. including cutting hosting fixing in position and applying one coat of primer. DSR 10.16.1 @194.40x0.735 |
| 16 | steel Work welded in buit up section /framed work ,including cutting ,hosting ,fixing in position and applying a priming coat of approved steel primer using structural steel etc as required , in grating ,frame ,guard bar,railing brackets ,gates and similar works as per DSR code no. 10.25.2 @172.60 x 0.735 |
| 17 | painting with synthetic paint of approved brand manufacture of required colour to give an even shade two or more coat on new work over an under coat of suitable shade with ordinary paint of approved brand and manufactuer DSR code no. 13.62.1 @226.25 x 0.735 |
| 18 | 25mm wooden planking tongued and grooved in flooring , including fixing with iron screws complete with : Second class teak wood DSR code 11.33.1 Second class teak wood @ (4508.95x0.735) |
| 19 | providing and fixing stainlees steel (grade 304)railing made of hollow tubes , channels plates etc including welding ,grinding ,buffing , polishing and making curvature (wherever reruied)and fitting the same with necessary stainless steel nuts and bolts complete,i/c fixing the railing with necessary accessorises & stainless steel dash fasteners, stainless steel bolts etc , of required size on top of floor or the side of waist slab with suitable arrangement as per approval of engineer-in- charge(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such nuts,bolts,fasteners etc) DSR no.10.28 |
| 20 | S/F water cooler(sanction by SE RED) |
| 21 | S/F RO/UV(sanction By SE RED) |
| 22 | water pump 1HP |
| 23 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25 nominal bore As per DSR codeno. 18.46.3 @439.25 x 0.735 |
| 24 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid:as per DSR [email protected] x 0.735 |
| 25 | Providing and fixing white vitreous china flat back half stall urinal of size 430x200x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern as per DSR code no.17.4.1 @6258.75 x 0.735 |
| 26 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 630x450mm with single 15mm C.P. brass pillar tap as per DSR code no. 17.7.2 @2226.35 x 0.735 |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. As per DSR code no. 18.9.3 @ 355.40 x 0.735 (25mm dia) |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.As per DSR code no. 18.8.1 @ 497.80 x0.735 (15mmdia) |
| 29 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8 931 : 15 mm nominal bore as per DSR code no.18.15.2@ 379.20 x 0.735 |
| 30 | LED Street light fixture, powder coated pressuredie cast aluminium body (System lumen efficacy>135 lm/Watt). 30 watt DSR Code no. 8.14.8 @1678.00 x 0.755x0.97 |
| 31 | Supplying and drawing following sizes of FRLS/HFFRPVC insulated copper conductor, single core cable inthe existing surface/ recessed steel/ PVC conduit asrequired. 4x2.5 sq.mm DSR Code No. 1.17.13@ 189.00 x0.755x0.97 |
| 32 | Supplying and drawing following sizes of FRLS/HFFRPVC insulated copper conductor, single core cable inthe existing surface/ recessed steel/ PVC conduit asrequired. 6x2.5 sq.mm DSR Code No. 1.17.15 @ 283.00x 0.755x0.97 |
| 33 | S/F of informatory sign board as approved size and specification |
| 34 | Drilling of 200 mm dia bore hole ( rate as per jalnigam )(0-30m) |
| 35 | Drilling of 200 mm dia bore hole ( rate as per jalnigam )(30-45m) |
| 36 | Drilling of 200 mm dia bore hole ( rate as per jalnigam )(45-100m) |
| 37 | Lowring of 113 mm dia blue pipe ( rate as per jalnigam)(0-30m) |
| 38 | Lowring of 113 mm dia blue pipe ( rate as per jalnigam)(30-45m) |
| 39 | Lowring of 113 mm dia blue pipe ( rate as per jalnigam)(45-100m) |
| 40 | Development of tube well |
| 41 | Instalation of pump 1.5 HP |
| 42 | Shifting of machine boring and pipe etc. |
| 43 | Supply of blue casing pipe 113 mm dia ( 28 kg) |
| 44 | Supply of blue casing reipped screen pipe 113 mm dia . |
| 45 | Supply of PVC end cap 110 mm dia |
| 46 | Supply of 32 mm PVC.column pipe |
| 47 | Supply of P>V>C> Jointing solution (500 ml) |
| 48 | Supply of Boring cover 100 mm dia |
| 49 | Supply of 32 mm dia Clamp |
| 50 | Suppy of 1.5 H.P. Crompton Submersible pump |
| 51 | supply of Automatic control panel |
| 52 | Supply of 2.5 mm cable |
| 53 | Supply of 20 mm ( gune matle ) bult Valve |
| 54 | Supply of 20 mm G.I. Nepple |
| 55 | Supply of bentonite ( 40 kg weight ) |
| 56 | supply of steal supporting wire |
| 57 | Gravel packing in tube well construction in accordance in S.I. 4097 including providing fine medium and coarse in required grading and size as per actual requirement all complite as per direction engineer/ incharge (as per market rate ) |
| 58 | Supply and filling spreading & levelling coarse sand of size range 1.5 mm to 2.0 mm in recharge pit in requirement thickess over gravel layear of all leads & lifts complete as per direction of engineer-in charge . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender