Tender For Design Proposal Leisure Valley, Sector 10, Chandigarh Under Landscaping, Providing And Fixing Of Gymnastic Equipments And Children Play Equipments
Tender Value
10.34 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
10 days left
EMD
20680
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Design Proposal Leisure Valley, Sector 10, Chandigarh Under Landscaping, Providing And Fixing Of Gymnastic Equipments And Children Play Equipments
BOQ
| Sl. No. | Item Description |
| 1 | Providing and Fixing of Two sided Rotator: Size:- Length – 1.7 m, Width – 0.48 m, Height - 1.31 m, Main pipe :- 114 mm X3mm, Connected Pipe (Round):- 60mmX3mm, 33mmX3mm & Connected Pipe (Rectangel):- 60X40X3 mmMaterial: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanizedPaint: All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge.Functions: The Two Sided Rotator features two positions combining the standing and sitting rotators. The Twisting motion stretches the obliques and abdominal muscles and serves to align the spins and lower back. This exercise can be done with up to two people at a time, one in a sealed position, one in a standing position. |
| 2 | Providing and Fixing of Hip Twister: Size:- Length – 1.31 m, Width - 0. 35 m,Height – 2.40 m & Main pipe :- 88 mm X3mmConnected Pipe:- 48mmX3mm, 32mmX3mmMaterial: Pre Galvanized Mild SteelPaint: All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge.Functions: The Hip Twister Consists of a swivel stand which rotates as the arms and shoulders are held square in the overhead holds. Standing with the spine straight, rotate slowly to the stretch position, alternating directions. While rotating right, the left internal and external oblique are stretched, and to a lesser extent, the abdominal and extensor muscles. Reversing direction works the same muscles on the other side. This is not a power exercise, so it might take several minutes of easy repetitions to achieve the best results. |
| 3 | Providing and Fixing of Horizontal Ladder: The popular term \\"Monkey Bars\\", well describes this apparatus. It helps build the kind of agility and upper body strength exhibited by our primate friend. Monkeys and humans share a well developed grip and the teres major and latissimus dorsi muscles - all involved in hanging, swinging and pulling skills. Try swinging down the length of the bars, reaching and grasping, overhand, one bar after the other. Stronger and/or lighter individuals will be able to use more of a bent arm. You can also simply use the equipment for chin-ups, using a variety of grips. Also, try lifting the knees and legs while hanging, helping to build abdominal strength.Size:- Length – 3.03 mtr, Width – 1.08 mtr, Height – 2.4 mtr, Main pipe :- 114 mm X3mm & Connected Pipe:- 42mmX3mm, 33mmX3mm Material: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized Paint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. Functions: The Horizontal Ladder is a great fitness station for almost any age group! It is used by a wide range of fitness enthusiasts - from schools to military and many, many others. Its size and heavy-duty strength make it appropriate for both youth and adult use. The height is adjustable upon installation all the way up to 7' 6 1/2\\" (2.3m). The long-width crossbars and wide breadth (5'1/4\\" / 1.53m) of this station also makes this item wonderful for a broad variety of users. |
| 4 | Providing and Fixing of The Strength and Stretch Bars: The assisted push-up is an effective overall upper-body strengthening exercise which exercises not only your chest, but your triceps, deltoids, biceps, back and abdominals as well. These are the same benefits achieved with regular push-up, the bars vary the resistance and allow additional repetitions without excessive strain. Assisted pull-ups exercises the same muscle groups required of chin-ups. Position yourself under the bar with the feet planted on the ground. Pull with the rowing action until the chin is above the bar. The resistance is controlled by the position of the feet and the chosen height of the bar. Additionally, all of the many exercises that can be done on a ballet bar can be practiced on the strength and stretch bars. These can include many leg strengthening exercises including alternating leg swings, lunges and deep knee bends. Size:Length – 2.6 mtr, Width – 2.6 mtr, Height – 1.32 mtr, Main pipe :- 88 mm X3mm &Connected Pipe (Round):- 32mmX3mm Material: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized Paint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. Function - The Strength and Stretch Bars help develop arm and shoulder power with a variety assisted pulling and pushing exercises. The five bars are set at different heights providing a choice of resistance levels. |
| 5 | Providing and Fixing of Integrated Fitness : Size: Width – 2.608 mtr, Height – 2.45 mtr, & Main pipe :- 88 mm X3mmConnected Pipe:- 48mmX3mm, 32mmX3mm, 25mmX3mmMaterial: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized. Paint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. Function – Integrated Fitness Apparatus is designed for to promote fun and fitness. It consists of multiple exercise challenges requiring the practice of balancing, climbing, strength and agility. The equipment requires resilient surfacing material underneath and covering a safety zone around the equipment. Consult the applicable playground safety guidelines. |
| 6 | Providing and Fixing Pull Up Bars/ Horizontal Bars : To perform a pull-up or chin-up, hold onto the bar, use the arms to pull up until the chin is level with or above the bar. Lower again and repeat according to your capability. Pull-ups / Chin-ups can be done with two hand grips, forward or reverse, each strengthening different muscles. The forward bar grip (backs of hands facing you) places more emphasis on the trapezius and muscles of the back, whereas the reverse bar grip (or underhand grip) is narrower and places focus on the biceps. The pull-up bars can also host many more exercises, including shoulder and arm stretching, improving the grip, the hanging leg lift which strengthens the abdominal muscles. Additionally, simply hanging by the arms to stretch the lower back and align the spine is a great benefit to the lower back. Introduce yourself to all exercises gradually, avoiding undue stress. Slowly build the number of repetitions. Most people find chin-ups very difficult, especially those with higher body weight. As necessary, use the ground to help boost upward motion.Size : Length – 2.4 mtr, Post diameter– 0.115 mtr, Height – 2.4 mtr, Main pipe :- 114 mm X3mm & Connected Pipe:- 32mmX3mm. Material: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized Paint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. Function - The Pull Up Bars / Horizontal Bars are a military fitness training favorite Chin-ups are one of the best tests of a person's strength to weight ratio -- a primary indicator of upper body strength. |
| 7 | Providing and Fixing of Waist stretcher: Length – 1.60 mtr, Width – 0.50 mtr, Height – 1.15 mtr, Main pipe :- 88 mm X3mm,Connected Pipe (Round):- 48mmX3mm & Connected Pipe (Rectangel):- 60X40X3 mm & 40X20X3 mmMaterial: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanized Paint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. FUNCTIONS: The Waist Stretcher provides support while the muscles and tendons of the back and abdominal area are stretched. Lean backwards against the equipment, holding the side bars for support. Carefully increase the backward level of stretch. Relax into the stretched position. Also, lean across the apparatus forwards to gently stretch the lower back and decompress the spine. |
| 8 | Providing & fixing of Pommel Horse apparatus: The resistance is controlled by the vertical force provided by the legs. The feet are planted on the ground. The more the feet are underneath the body the more support can be provided.Like the dips, push from a position with the elbows bent to a straight armed position. Focus on the extension of the triceps. The bars can also be used for angled push-ups and for abdominal exercises where the legs and feet are lifted from the ground to form an \\"L\\" position. Size:- Length – 2.16 mtr, Width – 0.75 mtr, Height – 1.00 mtr, Main pipe :- 88 mm X3mmConnected Pipe (Round):- 48mmX3mm, 32mmX3mm & Connected Pipe (Rectangel):- 60X40X3 mm. Material: Pre Galvanized Mild Steel. Pipes are pre galvanized Steel Pipe, ‘B’ Class ISI mark. All Nuts & Bolts must be galvanizedPaint: : All Weather Double Layer Powder Coated Paint Sealed complete in all respects to the entire satisfaction of the Engineer-in-Charge. FUNCTIONS: The Pommel Horse apparatus features three exercise positions with bars which allow assisted dips to be performed. Dips on the Parallel Bars are very difficult for most people, so this apparatus is designed to preserve the value of the important triceps and shoulder exercise for those who need less resistance. |
| 9 | Multi Seater See Saw : Area: 3mx0.5mSafe Play Area: 4m x1.5mThe MS See Saw comprises four FRP Seats. The lever is consisted of 20NB and 80NB powder coated GI Pipes. The bearing used in this items is heavy duty nylon bush types. The stands for see saw is made using 50NB GI Pipe. |
| 10 | Providing and fixing of Elephant slide having size L-15' & H-9', made of high density fibre with the system of stairs and sliders on both sides with fencing to provide cross entires and exists, poly marble and heavy steeel used for various parts of the total structure of Elephant. Matching Colour for parts order than those in white. Elephant holding football between two front legs. |
| 11 | Providing and fixing of Double Swing: In the double swing the leg support is made of 40 NB GI pipes and top pipes are of 50 NB. GI pipes with GI junction box with powder coating. The swing seat is made up of 10MM thick rubber belt. The belt seat is affixed on 6MM rubber coated GI chain. The wall bearing are mounted inside specially designed nylon clamp. |
| 12 | Providing & Fixing of ‘S’ Bridge Ladder:Rac Age : 4-12 yrs., area : 3.8m x 2.1m, Safe play Area : 4.8m x 3.1m & Height : 2.1 mThe ‘S’ Bridge is fabricated from 25 & 20 NB GI pipes. The vertical support area maid from 40 NB GI Pipes with a total length of 2.1 m from the ground. It has 2 nos. of ladder made from 40 NB GI Pipes on the vertical supports pipes itself. The Steps of the ladder are made from 20 NB GI Pipes. |
| 13 | Providing & Fixing of Jumbo 3 in 1: Area 4mx4m and Safe area 5mx5mStandard See Saw: This items provides a good entertainer for children. The seats of the see saw are made from rotational molding and the see saw stand is fitted on 40 NB CI Pipe. The level is of 15 NB & 25 NB pipes. The bearing used is a heavy duty bush type. Double Swing: In the double sing the leg support is bending made of 40nb GI pipes and top pipe is 50nb GI pipes with GI Junction box with powder coating. The swing seat is made up of 10mm thick rubber belt. The belt seat is affixed on 6mm rubber coated GI chain. The ball bearings are mounted inside a specially designed nylon clamp.Wave slide: The wave slide chute shall be made up of 4mm thick of Fibre reinforced plastic with self pigmented. The wave shape should be in such manner that it will not give any jerk or bump to the rider. The chute has its end such as it causes safe landing of the child. The landing portion should be in horizontal with respect to the ground. There should be support provided made up of 25 NB GI pipe. Providing and fixing of Big Multi Activity Play System-III:SPECIFICATION Sr. No. Description Qty. 1. Sq. Deck 7’-0” H With Canopy. 1 No. 2. Sq. Deck 5’-0” H With Canopy. 1 No.3. Sq. Deck 3’-0” H With Canopy. 1 No. 4. Sq. Deck 4’-0” X 4’-0” With 3’-0” Ht. 1 No. 5. Straight Inclined Bridge 4’-0” Long. 1 No.6. Swing Bridge 8’-0” Long. 1 No. 7. Spiral Slide 5’-0” 1 No. 8. Double Wave Slide 7’-0” Ht. 1 No. 9. Cross Stairs 5’-0” Ht. 1 No.10. Ladder 7’-0” Ht. 1 No. 11. Triangular Stairs 3’-0” Ht. 1 No. 12. Split Level Ladder. 1 No. 13. Double Wave Slide 3’-0” Ht. 1 No. 14. Expansion Ladder 7-0” & 3’-0”. 2 Nos. |
| 14 | Technical Specification1. Material:- a) G.I. Pipes: This G.I. pipes shall be heavy duty “B” class quality and shall confirm to IS: 1239 (Part-I) 1979 and shall be reputed make such as Tata/Jindal etc. b) M.S. Angle: The M.S. angles shall conform to IS: 226-1975 and shall be of standard make such as TISCO. c) Nuts, Bolts and Other Fasteners: All nuts, bolts and other fasteners to be used shall be hot Dip galvanized iron. d) Fibre Reinforced Plastic material: FRP material shall be made of top quality, polyester resin of reputed brand virgin quality standard glass made of reputed brand only. The moulding of FRP shall be done of contact moulding and has minimum tensile strength of 60 Mp.2. Fabrication:- Steel component shall be welded by electric arc welding using CO₂ as insert gas using best quality. Welding rods confirming to IS: 814. The welded joints shall be property grounded and coated with proxy sealant. All shapes dated and corners shall be properly grounded before painting. All holes shall be drilled by using specially designed hardened drilling fixture to ensure repeated & inter chargeability of the component. 3. Moulding:- Plastic moulded component shall be made of non- toxic and non-aging material with UV stabilizers.4. Galvanizing:- The minimum thickness of galvanizing shall be 20 microns. 5. Painting:- All uncoated and non protected surfaces shall be first be applied with a coat of red oxide after preparation of surface and then coated with epoxy primer by spray process in a dust free atmosphere. Then a coat of epoxy paint of reputed brand minimum thickness of 30 microns shall be applied.6. Powder Coating:- Powder coating shall be done of pure polyester exterior grade ultraviolet stabilized powder of reputed make which shall be applied after preparation of surface and then treated for adhesion by phosphate chemicals which will be further passivated to stop porosity. The minimum thickness of powder coating shall be 40 microns (Dry thickness). The coated items shall be then be cured in oven at 180- degree Celsius for minimum. 7. Brief Description/Sizes of Different Component of Multi play Systems:- (I) Square deck of size 4’-0” X 4’-0”:- The size of Sq. Deck shall be 4’-0” X 4’-0”. The vertical supporting pipes shall be of minimum size 80 NB G.I. pipes or as required with Nylon Roof clamps attached to its. The Horizontal supporting members shall be of M.S. angle of minimum size40X40X5 mm or as required. The platform of the ladder shall be of aluminium chequered plate of minimum thickness 16 SWG or as required. (II) Canopy:- The canopy over square deck shall be made in two layers of Fibre Reinforced Plastic with minimum thickness of 3mm and the same shall be supported on structural framework of M.S. Square pipe. The layers of ISO Gel coat shall be applied over canopy and two extra layers on the flanges. The colour, design and finish of the outer surface of the canopy shall be approved by Engineer-in-charge. (III) Double Wave Slide 3’-0” Ht.:- This shall be made FRP having minimum shell thickness of 4 mm. The backside of the slide surface shall be mate finished. The layers of tooling Gel coat shall be applied to the slide to give it smooth finish. The supporting frame of the side shall be made from G.I. pipe minimum size 25 NB. The pipes shall be powder coated.(IV) Double Wave Slide 7’-0” Ht.:- This shall be made FRP having minimum shell thickness of 4 mm. The backside of the slide surface shall be mate finished. 5 layers of tooling Gel coat shall be applied to the slide to give it smooth finish. The supporting frame of the side shall be made from G.I. pipe minimum size 25 NB. The pipes shall be powder coated. Additional ‘H’ type support shall be provided in the centre. (V) Spiral Slide 5’-0”:- The Spiral slide chute shall be made FRP having minimum shell thickness of 4mm and the same shell be supported on centre support of G.I. pipe having minimum size of 80 NB. The backside of the slide surface shall be MAT. 5 layers of tooling Gel coat shall be applied to the slide to give it smooth finish. The landing module shall be supported on G.I pipes of minimum size 20NB powder coated GI Pipes with nylon clamps attached to it. (VI) Pipe Ladder:- The pipe ladder shall be made of powder coated GI Pipes minimum size of 25 NB. (VII) Arch entry railing:- The frame of the Arch entry railing shall be made of powder coated GI pipe of minimum size 25 NB and the same shall be supported with 25 NB powder coated GI pipes. Nylon clamps are attached to the vertical pipe support of 80 NB pipe. (VIII) Straight railing:- The straight railing shall be made of horizontal pipe of size 25 NB and vertical pipes of 20 NB. (IX) Straight Bridge:- It shall be made of 25 mm thick wooden planks of Sheesham of Sal wood having 150 mm width an 810 mm length. The wooden planks shall be attached together with the help of nuts and bolts and shall be suspected with 8mm thick galvanized chains. The railing shall be made of powder coated pipe supported of 20 NB GI Pipe. (X) Straight Inclined:- This small be made of MS angle iron of minimum of size 50X50X50 mm. The top surface shall be made of perforated galvanized sheet of 16 SWG and shall be supported on MS angle iron of minimum size 25X25X25 mm. The side railing shall be provided on both sides for safety purpose and it shall be made of powder coated GI pipe of size 20 NB. (XI) Split Level Ladder:- This shall be made of Fibre Reinforced plastic of minimum 4 mm thickness. The purpose of this ladder is to combine suitably two decks at different height. |
| 15 | Providing & Fixing of Multi Activity Play System (II) (MAPS II):Deck 3’ Ht. 1, Deck 2.5 Ht. 1,FRP Staircase 3’ Ht. 1, FRP Curve Slide 3’ Ht. 1, Rainbow ladder 1, Double Swing 1, Bubble Pannel 1, Steering 1 Area: 7mX5m Safe Area: 8mX6m 1. Deck 3’ height & 2.5’ height - The Deck of MAPS is made up of 4mm thickness fiberglass reinforced plastic. The top of the platform shall be made up of anti skid surface with multicolored pigment resign. All the attachments is through nylon clamps only. The size of platform is 1.6Mx1.6M. 2. FRP Stairs case - The ladder shall be made up of the fiber reinforced plastic with a thickness of 4mm. It should have reinforcement to maintain strength and avoid bending. 3. FRP Curve Slide- It is made up of 4mm thickness fiber reinforced plastic. 4. Rainbow Ladder- It is 5’ long in height, the main frame of ladder is made up 20 NB G.I. Pipe and risers are made up of 40 NB G.I. Pipes. 5. Double Swing.-Leg Support in 40 NB G.I. Pipe and top pipe is made up of 50 NB G.I. Pipe seat is made up of 10 mm reinforced rubbers and G.I. Pipe should be rubber coated and movement with Nylon Clamps at top. 6. Bubble Panel.-The railing is providing to all decks for safety and it is made up of LLDPE. 7. Steering Wheel-It is made up of LLDPE. |
| 16 | Providing and fixing of Dinosaur slide L-16' & H-7' finish of rugged features of the giant monstar with natural touch made of ploy marble/high density fibre with the system of stairs and sliders on both sides with fencing to provide cross entires and exists, poly marble and heavy steeel used for various parts of the total structure of Dinosaur with matching colour. |
| 17 | Providing and fixing of Giraffe Fibre (FRP) Slide L-11.6', B- 6.2' & H- 9' made of adequate thickness of 4mm fiber angle one piece. All shading and multicolour used for all material shall be first quantity and form fresh stock as per specified standerd and painting with poly urethane primer and paint completed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender