Tender For Execution Of Rural Piped Water Supply Scheme To Dhonodamal In The Village Jharigaon Of G.P Jharigaon Under Jharigaon Block In Nabarangpur District Including 5 Years O&M. (New)
Tender Value
1.80 Crore
Estimated cost
Bid Submission
02 Sep 2026
3 days left
EMD
1.80 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nabarangpur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Execution Of Rural Piped Water Supply Scheme To Dhonodamal In The Village Jharigaon Of G.P Jharigaon Under Jharigaon Block In Nabarangpur District Including 5 Years O&M. (New)
BOQ
| Sl. No. | Item Description |
| 1 | RPWS TO ZONE-I VILL. JHARIGAON (DHONODAMAL) :- Head WorksSupplying all labour T&P for Construction of Platrform for Production well as per direction of Engineering In Charge. |
| 2 | Approach RoadSupplying all labour T&P for Construction of Approch Road of Length 10 mtr as per direction of Engineering In Charge. |
| 3 | Supplying all labour T & P for earth work for foundation and plinth / pipe line in all kinds of soil within 50m, initial lead and 1.5m, initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge . |
| 4 | Supplying all labour T & P for spreading or dressing of moorum & sand. |
| 5 | Moorum |
| 6 | Supplying all labour T & P for cement Concrete (1:2:4) with 12mm size hard granite chips per 1cum |
| 7 | Supplying all labour T & P fo Rigid and smooth centering for R.C.C works including false works and dismantling them after casting including cost of materials complete in ground floor. |
| 8 | Pump HouseSupplying all labour T&P for Construction of pump house near source as per direction of Engineering In Charge. |
| 9 | Supplying all labour T & P for earth work for foundation in all kinds of soil within 50m, initial lead and 1.5m, initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge. |
| 10 | Supplying all materials , labour T & P for filling in foundation and plinths with sand well watered and rammed including cost,carriage & royality of all materials etc. all complete & as per direction of Engineer-In-Charge |
| 11 | Supplying all labour T & P materials providing C.C (1:3:6)with 40 mm CBG metal including cost,conveyance and royality of materials etc all complete& as per direction of Engineer-In-Charge |
| 12 | Supplying all labour T & P materilas providing RCC work of M-20 grade with 20 mm & down grade black hard granite crusher broken stone chips including hosting & laying cost, conveyance and royalty of materials etc. all complete as per the direction of Engineer-In-Charge |
| 13 | Add 10 % extra on labour rate for slope roof quantity |
| 14 | Supplying all labour T & P for solid cement concrete block machine mixed and Hydraulic compressed having crushing strength not less than 75 kg / cm² in CM (1:6) in foundation and plinth per cum. |
| 15 | Supplying all labour T & P for rigid and smooth centering, shuttering for R.C.C work including false works & dismantling them after casting including cost of materials complete in ground floor. |
| 16 | Foundation ,Column , Plinth Bend |
| 17 | Lintel |
| 18 | Roof , Chhaja |
| 19 | Supplying all labour T & P for fitting & fixing uncoated HYSD Bar reinforcement including cutting, bending ,binding,shifting to site including cost of material etc complete as per the direction of Engineer-In-Charge. |
| 20 | Supplying all labour T & P fo brick work in super structure with bricks 23cm X 11cm X 8cm size having crushing strength not less than 75 Kg/cm² with dimensional tolerence ±8 percent in cement motar (1:6) for superstrustructure per 1 cum |
| 21 | Supplying all labour T & P for 12 mm thick in cement plaster in cement mortar (1:6) for brick work |
| 22 | Supplying all labour T & P for 2.5cm artificial stone flooring with cement concrete (1:2:4) including punning using 12mm size hard broken granite chips |
| 23 | Supplying all labour T & P for vitrified premium grade floor tiles of (300 mm x 300 mm) having thickness 8 mm to 10 mm confirming to IS-4457 |
| 24 | Supplying all labour T & P for White washing two coats with shell lime per sqm |
| 25 | Supplying all labour T & P for wall painting 2 coats with plastic emulsion paint of approved shade on old work to give an even shade including cost of paint per 1 sqm |
| 26 | Supplying all labour T & P for finishing wall with Weather Coat of approved shade on new work two coat to give an even shade including cost of paint. |
| 27 | Supplying all labour T & P for M.S door including making, fitting , fixing and transportation to site as per direction of Engineer-In-Charge |
| 28 | Pump House Door |
| 29 | Toilet Door |
| 30 | Window |
| 31 | Supplying all labour T & P for fitting & fixing of seramic Indian pan for toilet room inluding all cost transportation etc all complete as per direction of Engineer-In-charge.(Including all fittings) |
| 32 | Supplying all labour T & P for R.C.C ring for 0.9 mtr dia including transporting ,excavation, fixing and placing in position of soakpit . |
| 33 | Supplying all labour T & P for R.C.C cover plate including transporting , fixing and placing in position of soakpit . |
| 34 | Supplying all labour T & P for writing information and draw a logo of BASUDHA |
| 35 | Internal ElectrificationSupplying all labour T&P for Internal Electrification for pump house as per direction of Engineering In Charge. |
| 36 | Recessed wiring to light point with 1.5 sqmm FR PVC insulted single core multistand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 AMP 250 V piano type switch ISI marked and ceiling rose ISI Marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.00 sqm FR PVC insulted single core multistrand copper conductor and earth wire including all accessories and connection as per direction of Engineer in charge (make of wire = finollex / L &T / Anchor / Havels / V-Guard) (deducting the cost of S/F of 100 mm x 100 mm x 60 mm MS box with bakelite cover - 1 no ) |
| 37 | do-…………group A (1.1.1-1.24.2) |
| 38 | do-…………group B (1.1.1-1.24.2) |
| 39 | do-…………group C(1.1.1-1.24.2) |
| 40 | Recessed wiring to Fan point in |
| 41 | do-…………group C(1.1.1-1.24.2) |
| 42 | S/F of 5amp switch & socket out let of ISI marked on existing board (1.25.1 &1.25.4) |
| 43 | S/F of metal box 180mm x 100mm x 60mm deep (Nominal size) in recess switch suitable size of phenolic laminated sheet in front including providing and fixing 5 pin 15/16 amp. Piano type switch connection, painting etc. as required (1.27) |
| 44 | Wiring for circuit / sub-main wiring along with earth wire with following size of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire-finolex/L&T/Anchor/Havels/V-Guard) |
| 45 | 2 x 1.5 sqmm + 1 x 1.5 sqmm |
| 46 | 2 x 4 sqmm + 1 x 1.5 sqmm |
| 47 | S/F of bbattan holder BK angle holder ISI marked including connection etc. instead of ceiling rose (1.29-1.28) |
| 48 | Supply,installation, testing and commision of DP main switch (IS-13940 part 3/1993) on existing surface/wall mounting & complete with H.R.C. fuse links, inter connections earthing etc. as required as per direction of engnieer in-charge (Make-Simens/HPL/Anchor/L&T) 32amp. D.P. -do- |
| 49 | do- 63amp. T.P.N. Main switch with bus bar |
| 50 | do- 32amp. T.P.N. Main switch on the pannel board |
| 51 | S/F of 'B' series SP MCB of 6 amp. Rating 240 volt 'B' series MCB for lighting and other loads in the exiting MCB Distribution board ISI marked complete with connection, tesitng and commissioning etc. as required single pole(2.6.1) |
| 52 | S/F of 4 way single pole and neutral sheet MCB distribution board 250 bolt on surface / recess complete with tinned copper bus bar, neutral bar , earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required |
| 53 | S/F of 16/18 SWG metal box of following sizes (Nominal size) in recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required |
| 54 | 150 mm x 100 mm x 60 mm deep (1.24.4) |
| 55 | 180 mm x 100 mm x 60 mm deep (1.24.5) |
| 56 | Earthing with G.I earth pipe 3 mtrs. Long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe with charcoal and salt as required (3.4 + 3.6 ) |
| 57 | Supply and laying of 6 SWG G.I wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required (3.8) |
| 58 | S / F of 1200 mm A.C ceiling fan with all accessories and connections without fan regulator (Khaitan-Magnet / Anchor - XL) |
| 59 | Supply. Installation, Testing and commissioning of bulkhead fittings including fixing of 8 watt CFL lamp with die cast aluminium housing and frosted glass cover (Make-Havels ) |
| 60 | Supply. Installation, Testing and commissioning of 2 x 27 watt energy efficient T-5 street light fitting including fixing of 24 watt T-5 Lamps-2 nos. including fixing of bracket and all accessories as per direction of engineer. (make - Bajaj/Havels) |
| 61 | S/ F of electric step type fan regulator of ISI marked |
| 62 | S /F of 18 watt CFL lamp |
| 63 | S /F of Fan hook \\"S\\" type made of 16 mm MS Road |
| 64 | S /F of 63/ 100 A kit kat type Fuse cut out on the surface of the pannel board |
| 65 | S/F of Pannel Board of 3' x 4' size (made of 6mm thick m/s sheet and 25mmx25mmx6mm m/s angle with proper pointing) on the wall surface |
| 66 | Compund WallSupplying all labour T&P for Construction of 80 mtr Compound wall for Pump house & OHT as per direction of Engineering In Charge. |
| 67 | Supplying all labour T & P for earth work for foundation in all kinds of soil within 50m, initial lead and 1.5m, initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge per 100 cum. |
| 68 | Supplying all materials, labor, T&P for filling the foundation with sand watered and rammed with all cost, conveyance and royalities as per direction of Engineer-in-charge |
| 69 | Supplying all labour T & P for cement Concrete (1:3:6) with 4cm size hard granite metal per 1cum as per direction of Engineer-in-charge |
| 70 | Supplying all labour T & P for R.C.C work of M-20 grade with 20mm and down grade black hard granite(crusher broken) stone chips including hoisting and laying as per direction of Engineer-in-charge |
| 71 | Supplying all labour T & P for rigid and smooth centering, shuttering for R.C.C work including false works & dismantling them after casting including cost of materials complete in ground floor as per direction of Engineer-in-charge |
| 72 | Foundation Below Plinth bend |
| 73 | Column & Plinth Bend |
| 74 | Supplying all labour T & P for random rubble H.G stone Masonry in cement mortar (1:6) in foundation and plinth per 1 cum. |
| 75 | Supplying all labour T & P for fitting & fixing uncoated HYSD Bar reinforcement including cutting, bending ,binding,shifting to site including cost of material etc complete as per the direction of Engineer-In-Charge. |
| 76 | Supplying all labour T & P fo brick work in super structure with bricks 23cm X 11cm X 8cm size having crushing strength not less than 75 Kg/cm² with dimensional tolerence ±8 percent in cement motar (1:6) for superstructure per 1 cum as per direction of Engineer-in-charge |
| 77 | Supplying all labour T & P for 12mm thick cement plaster (1:6) on brick work per length of 50 mtr as per direction of Engineer-in-charge |
| 78 | Supplying all labour T & P for White washing two coats with shell lime per sqm as per direction of Engineer-in-charge |
| 79 | Supplying all labour T & P for finishing wall with Weather Coat of approved shade on new work two coat to give an even shade including cost of paint. as per direction of Engineer-in-charge |
| 80 | supply labour T & P Fitting and fixing with colour washing / painting of 4 mtr length Grill gate. |
| 81 | Installation of Pump and MotorSupply, installation, testing and commissioning of variable voltage star rated, ISI/BIS and ISO certified, three phase vertical submersible 3 HP pump set of working head of 68 mtr and 1.80 lps from Source to OHT (5 nos Pump sets including 100% stand-by) |
| 82 | Electric driven vertical submersible pump set(SD) of 3-phase having Head of 68 mtr & Discharge 1.80 LPS, Kirloskar,KSB,LUBI make. (3 HP) |
| 83 | Supplying ,installing commissionig & testing of ISI marked Motor control panel board suitable for above pump set with suitable volt meter & Ampere meter (if not in the control pannel volt meter & Ampere meter will be fitted separately). |
| 84 | Supplying ,installing commissionig & testing of ISI marked 100 AMP main switch suitable for above pump set . |
| 85 | 25 sq. mm Armoured 4 core Aluminium cable reputed make . |
| 86 | 6 sq. mm copper Submersiable flat cable reputed make like . |
| 87 | M.S.Angle frame with suitable nut & bolt with painting.for pannel boards. |
| 88 | Double ended Flanged G.I Pipe of 50mm dia.D/F of medium quality with required nut,bolt,rubber insertion. |
| 89 | Supplying all labour T&P for lowering of pump and motor into production well up to the required depth including jointing to rising main,cable jointing with required materials & cost of transportation to site etc.all complete as per direction of Engineer in charge. |
| 90 | 50 x 80 mm both side flanged G.I tapper of 0.40 mtr. Length.. |
| 91 | 50 mm x 90 degree G.I Bend D/F of size ( .30 x .30 ) m |
| 92 | Supplying, fabricating and fixing MS Angle Supports 50 mm × 50 mm × 6 mm, 1.0 m long, including drilling, welding, and fixing 12 SWG (2.64 mm) GI Barbed Wire over the existing 80 Meter boundary wall, including binding wire, clamps, fixing accessories |
| 93 | Installation of Pump and Motor(Sump to OHT)Supply, installation, testing and commissioning of variable voltage star rated, ISI/BIS and ISO certified, three phase Horizontal submersible 5 HP pump set of working head of 36 mtr and 1.58 lps from Sump to OHT (5 nos Pump sets including 100% stand-by) |
| 94 | Electric driven Horizontal submersible pump set(SD) of 3-phase having Head of 36 mtr & Discharge 1.58 LPS, Kirloskar, KSB, LUBI make. (5.00 HP) |
| 95 | Supplying ,installing commissionig & testing of ISI marked Motor control panel board suitable for above pump set with suitable volt meter & Ampere meter (if not in the control pannel volt meter & Ampere meter will be fitted separately). |
| 96 | Supplying ,installing commissionig & testing of ISI marked 100 AMP main switch suitable for above pump set . |
| 97 | 25 sq. mm Armoured 4 core Aluminium cable reputed make . |
| 98 | 10 sq. mm copper Submersiable flat cable reputed make like . |
| 99 | M.S.Angle frame with suitable nut & bolt with painting.for pannel boards. |
| 100 | Double ended Flanged G.I Pipe of 80mm dia.D/F of medium quality with required nut,bolt,rubber insertion. |
| 101 | Supplying all labour T&P for lowering of pump and motor into production well up to the required depth including jointing to rising main,cable jointing with required materials & cost of transportation to site etc.all complete as per direction of Engineer in charge. |
| 102 | 50 x 80 mm both side flanged G.I tapper of 0.40 mtr. Length.. |
| 103 | 50 mm x 90 degree G.I Bend D/F of size ( .30 x .30 ) m |
| 104 | Supply of all labour T & P, material for soil testing, supply of design, drawing, construction, errection, testing & commissioning etc of RCC elevated storage reservoir with dome using RCC M25, 2 nos. ISI marked suitable dia sluice valve , 1No of suitable dia butter fly valve & it’s RCC valve chambers as per approved drawing , supplying fitting & fixing of suitable medium grade GI pipe make confirming to IS specification of required length from percolation well to ESR & ESR to distribution main including CI/GI for in-let, out let, over flow& washing line of ESR, RCC stair case with suitable dia structural stainless with suitable dia structural stainless steel hand rail around dome & landing etc. And stainless steel ladder outside & aluminium ladder inside, lightening arrester confirming to IS specification water level indicator. (Construction of Duck Bed above the ground level for supporting of Inlet and Outlet Pipe & Clamping of all the pipe with the Column)- (70 KL ESR OF 15 MTR STAGGING) |
| 105 | Design, drawing, construction, errection, testing & commissioning etc of RCC On Ground reservoir OR Sump of different capacity with dome shape covering using RCC M25 grade by supplying all materials, labour, equipment T & P including testing of soil to ascertain the SBC & other parameters required for design etc fitting & fixing of suitable medium grade GI pipe make confirming to IS specification of required length CI/GI for in-let, out let, over flow& fixing of CI paddle collars on the wall of container etc all complete as per the direction of engineer-in-charge(50 KL SUMP) |
| 106 | Raising Main & Distribution SystemSupplying of all labour T & P for Earth work excavation in trenches for DI/ HDPE pipe lines in all kinds of soils within 50 M initial lead & 1.5 M intial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm & laying in layers not exceeding 0.3 m in depth etc all complete as per the direction of engineer in-charge.(160 mm HDPE pipe ,110 mm HDPE pipe ,90 mm HDPE Pipe ) |
| 107 | Supplying of all labour T & P for filling in foundation trenches with excavated materials as directed by the Engineer-In-Charge of earth work for cum (Ordinary Soil) |
| 108 | Supplying all material labour ,T&P & laying in trenches HDPE pipes conforming to IS 4984-1995 and specials of following Out side diameter and class-1 to class-3 and jointing by fusion welding method including testingas per specification complete. and as per the direction of engineer in charge . Including all Fittings and fixing.(110 mm HDPE pipe (PN-10)) |
| 109 | Supplying all labour ,T&P & laying and jointing GI pipes, fittings & specials of approved make excluding earthwork in excavation & refilling of trenches & including cost of pipe as per specification,transportation,taxes, & testing of pipe etc & febrication in case of metalic pipe all complete and as per the direction of engineer in charge |
| 110 | 100 mm GI pipe (MEDIUM) |
| 111 | 80 mm GI pipe (MEDIUM) |
| 112 | Supplying all material labour ,T&P & laying in trenches HDPE pipes conforming to IS 4984-1995 and specials of following Out side diameter and class-1 to class-3 and jointing by fusion welding method including testingas per specification complete. and as per the direction of engineer in charge . Including all Fittings |
| 113 | 160 mm HDPE Pipe (PN-6) |
| 114 | 110 mm HDPE Pipe (PN-6) |
| 115 | 90 mm HDPE Pipe (PN-6) |
| 116 | Supply all labour T&P fitting and fixing of C.I sluice valves with double flanged ends in the water line for controlling purposes conforming to IS: 14846-2000 for the following rating and nominal diameters as per specifications complete of approved make with supply of all joining materials, T&P etc all complete including cost of all materials and fittings etc all complete as per direction of engineer-in-charge. |
| 117 | 80mm CI Sluice Valve |
| 118 | 100 mm CI Sluice Valve |
| 119 | 150 mm CI Sluice Valve |
| 120 | 100 mm CI NR Valve |
| 121 | Supply and fitting & fixing of CI Air Valve of approved make with supply of Jointing materials T&P etc all complete as per the direction of Engineer-In-Charge. |
| 122 | 15mm Air Valve |
| 123 | Supply all labour T&P fitting and fixing of construction of Valve Chamber for Sluice Valve & NR Valve complete as directed by the engineer in-charge.. |
| 124 | Supply all labour T&P fitting and fixing of construction of Valve Chamber for Air Valve complete as directed by the engineer in-charge.. |
| 125 | Dismantling the C.C roads and removing including stacking the useful materials for reuse and removing the debris within 50m. Lead including all labour & T&P required for the work complete as directed by the engineer in-charge. (320 mtr x 0.41 mtr x 0.20 mtr) |
| 126 | Supplying all labour T&P for cement concrete (1:2:4) with 12mm size hard granite chips per 1 cum. ( ref pg no.44, SL -7, analysis of rates) (320 mtr x 0.41 mtr x 0.20 mtr) |
| 127 | Supply all labour T&P fitting,fixing and Installation of Functional Household Tap Connection from the existing ferrule point to the household Premises. |
| 128 | Supply all labour T&P fitting and fixing of construction of Stand alone for Govt. Institution.(1000Ltr. Storage) |
| 129 | Supply all materials, labour, T& P and providing and fixing IEC hoarding board of size 1.00m (4') x 0.91m (3'). The hoarding frame 25mm x25mm x 3mm thick hollow square stainless stell bar supporting with 25mm x 25mm x 2mm size stainless steel bar in middle- 2 nos. covered with 1.6mm thick steel plate, fixing of IEC Message over teh board (Flex banner of 6' x 4' size) as per desing specification including 2 nos. 55mm dia stainless steel pipe of 2mm thickness support pillar including earthwork in excavation in foundation in all kids of soil, Cement concrete (1:2:4) with 12 mm size HG chips with cost. carriage, royality and taxes of all materials, welding, buffing, polishing and labour etc. all complete as per direction of Enginner in Charge. |
| 130 | RPWS TO ZONE-II VILL: JHARIGAON (BALAJI SAHI)Head WorksSupplying all labour T&P for Construction of Platrform for Production well as per direction of Engineering In Charge. |
| 131 | Approach RoadSupplying all labour T&P for Construction of Approch Road of Length 10 mtr as per direction of Engineering In Charge. |
| 132 | Supplying all labour T & P for earth work for foundation and plinth / pipe line in all kinds of soil within 50m, initial lead and 1.5m, initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge . |
| 133 | Supplying all labour T & P for spreading or dressing of moorum & sand . |
| 134 | Moorum |
| 135 | Supplying all labour T & P for cement Concrete (1:2:4) with 12mm size hard granite chips per 1cum |
| 136 | Supplying all labour T & P fo Rigid and smooth centering for R.C.C works including false works and dismantling them after casting including cost of materials complete in ground floor. |
| 137 | Pump HouseSupplying all labour T & P for earth work for foundation in all kinds of soil within 50m, initial lead and 1.5m, initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge. |
| 138 | Supplying all materials , labour T & P for filling in foundation and plinths with sand well watered and rammed including cost,carriage & royality of all materials etc. all complete & as per direction of Engineer-In-Charge |
| 139 | Supplying all labour T & P materials providing C.C (1:3:6)with 40 mm CBG metal including cost,conveyance and royality of materials etc all complete& as per direction of Engineer-In-Charge |
| 140 | Supplying all labour T & P materilas providing RCC work of M-20 grade with 20 mm & down grade black hard granite crusher broken stone chips including hosting & laying cost, conveyance and royalty of materials etc. all complete as per the direction of Engineer-In-Charge |
| 141 | Add 10 % extra on labour rate for slope roof quantity |
| 142 | Supplying all labour T & P for solid cement concrete block machine mixed and Hydraulic compressed having crushing strength not less than 75 kg / cm² in CM (1:6) in foundation and plinth per cum. |
| 143 | Supplying all labour T & P for rigid and smooth centering, shuttering for R.C.C work including false works & dismantling them after casting including cost of materials complete in ground floor. |
| 144 | Foundation ,Column , Plinth Bend |
| 145 | Lintel |
| 146 | Roof , Chhaja |
| 147 | Supplying all labour T & P for fitting & fixing uncoated HYSD Bar reinforcement including cutting, bending ,binding,shifting to site including cost of material etc complete as per the direction of Engineer-In-Charge. |
| 148 | Supplying all labour T & P fo brick work in super structure with bricks 23cm X 11cm X 8cm size having crushing strength not less than 75 Kg/cm² with dimensional tolerence ±8 percent in cement motar (1:6) for superstrustructure per 1 cum |
| 149 | Supplying all labour T & P for 12 mm thick in cement plaster in cement mortar (1:6) for brick work |
| 150 | Supplying all labour T & P for 2.5cm artificial stone flooring with cement concrete (1:2:4) including punning using 12mm size hard broken granite chips |
| 151 | Supplying all labour T & P for vitrified premium grade floor tiles of (300 mm x 300 mm) having thickness 8 mm to 10 mm confirming to IS-4457 |
| 152 | Supplying all labour T & P for White washing two coats with shell lime per sqm |
| 153 | Supplying all labour T & P for wall painting 2 coats with plastic emulsion paint of approved shade on old work to give an even shade including cost of paint per 1 sqm |
| 154 | Supplying all labour T & P for finishing wall with Weather Coat of approved shade on new work two coat to give an even shade including cost of paint. |
| 155 | Supplying all labour T & P for M.S door including making, fitting , fixing and transportation to site as per direction of Engineer-In-Charge |
| 156 | Pump House Door |
| 157 | Toilet Door |
| 158 | Window |
| 159 | Supplying all labour T & P for fitting & fixing of seramic Indian pan for toilet room inluding all cost transportation etc all complete as per direction of Engineer-In-charge.(Including all fittings) |
| 160 | Supplying all labour T & P for R.C.C ring for 0.9 mtr dia including transporting ,excavation, fixing and placing in position of soakpit . |
| 161 | Supplying all labour T & P for R.C.C cover plate including transporting , fixing and placing in position of soakpit . |
| 162 | Supplying all labour T & P for writing information and draw a logo of BASUDHA |
| 163 | Internal ElectrificationSupplying all labour T&P for Internal Electrification for pump house as per direction of Engineering In Charge. |
| 164 | Recessed wiring to light point with 1.5 sqmm FR PVC insulted single core multistand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5 AMP 250 V piano type switch ISI marked and ceiling rose ISI Marked mounted on MS box having front bakelite cover of suitable size,MS box with 1.00 sqm FR PVC insulted single core multistrand copper conductor and earth wire including all accessories and connection as per direction of Engineer in charge (make of wire = finollex / L &T / Anchor / Havels / V-Guard) (deducting the cost of S/F of 100 mm x 100 mm x 60 mm MS box with bakelite cover - 1 no ) |
| 165 | do-…………group A (1.1.1-1.24.2) |
| 166 | do-…………group B (1.1.1-1.24.2) |
| 167 | do-…………group C(1.1.1-1.24.2) |
| 168 | Recessed wiring to Fan point in |
| 169 | do-…………group C(1.1.1-1.24.2) |
| 170 | S/F of 5amp switch & socket out let of ISI marked on existing board (1.25.1 &1.25.4) |
| 171 | S/F of metal box 180mm x 100mm x 60mm deep (Nominal size) in recess switch suitable size of phenolic laminated sheet in front including providing and fixing 5 pin 15/16 amp. Piano type switch connection, painting etc. as required (1.27) |
| 172 | Wiring for circuit / sub-main wiring along with earth wire with following size of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire-finolex/L&T/Anchor/Havels/V-Guard) |
| 173 | 2 x 1.5 sqmm + 1 x 1.5 sqmm |
| 174 | 2 x 4 sqmm + 1 x 1.5 sqmm |
| 175 | S/F of bbattan holder BK angle holder ISI marked including connection etc. instead of ceiling rose (1.29-1.28) |
| 176 | Supply,installation, testing and commision of DP main switch (IS-13940 part 3/1993) on existing surface/wall mounting & complete with H.R.C. fuse links, inter connections earthing etc. as required as per direction of engnieer in-charge (Make-Simens/HPL/Anchor/L&T) 32amp. D.P. -do- |
| 177 | do- 63amp. T.P.N. Main switch with bus bar |
| 178 | do- 32amp. T.P.N. Main switch on the pannel board |
| 179 | S/F of 'B' series SP MCB of 6 amp. Rating 240 volt 'B' series MCB for lighting and other loads in the exiting MCB Distribution board ISI marked complete with connection, tesitng and commissioning etc. as required single pole(2.6.1) |
| 180 | S/F of 4 way single pole and neutral sheet MCB distribution board 250 bolt on surface / recess complete with tinned copper bus bar, neutral bar , earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required |
| 181 | S/F of 16/18 SWG metal box of following sizes (Nominal size) in recess with suitable size of phenolic laminated sheet cover in front including cutting the wall and making good the same case of recessed conduit as required |
| 182 | 150 mm x 100 mm x 60 mm deep (1.24.4) |
| 183 | 180 mm x 100 mm x 60 mm deep (1.24.5) |
| 184 | Earthing with G.I earth pipe 3 mtrs. Long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe with charcoal and salt as required (3.4 + 3.6 ) |
| 185 | Supply and laying of 6 SWG G.I wire ISI marked at 0.5 mtr. Below ground level for conductor earth electrode including soldering etc. as required (3.8) |
| 186 | S / F of 1200 mm A.C ceiling fan with all accessories and connections without fan regulator (Khaitan-Magnet / Anchor - XL) |
| 187 | Supply. Installation, Testing and commissioning of bulkhead fittings including fixing of 8 watt CFL lamp with die cast aluminium housing and frosted glass cover (Make-Havels ) |
| 188 | Supply. Installation, Testing and commissioning of 2 x 27 watt energy efficient T-5 street light fitting including fixing of 24 watt T-5 Lamps-2 nos. including fixing of bracket and all accessories as per direction of engineer. (make - Bajaj/Havels) |
| 189 | S/ F of electric step type fan regulator of ISI marked |
| 190 | S /F of 18 watt CFL lamp |
| 191 | S /F of Fan hook \\"S\\" type made of 16 mm MS Road |
| 192 | S /F of 63/ 100 A kit kat type Fuse cut out on the surface of the pannel board |
| 193 | S/F of Pannel Board of 3' x 4' size (made of 6mm thick m/s sheet and 25mmx25mmx6mm m/s angle with proper pointing) on the wall surface |
| 194 | Compound wallSupplying all labour T&P for Construction of 80 mtr Compound wall for Pump house & OHT as per direction of Engineering In Charge. |
| 195 | Supplying all labour T & P for earth work for foundation in all kinds of soil within 50m, initial lead and 1.5m, initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of Engineer-in-charge per 100 cum. |
| 196 | Supplying all materials, labor, T&P for filling the foundation with sand watered and rammed with all cost, conveyance and royalities as per direction of Engineer-in-charge |
| 197 | Supplying all labour T & P for cement Concrete (1:3:6) with 4cm size hard granite metal per 1cum as per direction of Engineer-in-charge |
| 198 | Supplying all labour T & P for R.C.C work of M-20 grade with 20mm and down grade black hard granite(crusher broken) stone chips including hoisting and laying as per direction of Engineer-in-charge |
| 199 | Supplying all labour T & P for rigid and smooth centering, shuttering for R.C.C work including false works & dismantling them after casting including cost of materials complete in ground floor as per direction of Engineer-in-charge |
| 200 | Foundation Below Plinth bend |
| 201 | Column & Plinth Bend |
| 202 | Supplying all labour T & P for random rubble H.G stone Masonry in cement mortar (1:6) in foundation and plinth per 1 cum. |
| 203 | Supplying all labour T & P for fitting & fixing uncoated HYSD Bar reinforcement including cutting, bending ,binding,shifting to site including cost of material etc complete as per the direction of Engineer-In-Charge. |
| 204 | Supplying all labour T & P fo brick work in super structure with bricks 23cm X 11cm X 8cm size having crushing strength not less than 75 Kg/cm² with dimensional tolerence ±8 percent in cement motar (1:6) for superstructure per 1 cum as per direction of Engineer-in-charge |
| 205 | Supplying all labour T & P for 12mm thick cement plaster (1:6) on brick work per length of 50 mtr as per direction of Engineer-in-charge |
| 206 | Supplying all labour T & P for White washing two coats with shell lime per sqm as per direction of Engineer-in-charge |
| 207 | Supplying all labour T & P for finishing wall with Weather Coat of approved shade on new work two coat to give an even shade including cost of paint. as per direction of Engineer-in-charge |
| 208 | supply labour T & P Fitting and fixing with colour washing / painting of 4 mtr length Grill gate. |
| 209 | Installation of Pump and MotorSupply, installation, testing and commissioning of variable voltage star rated, ISI/BIS and ISO certified, three phase vertical submersible 3 HP pump set of working head of 68 mtr and 1.80 lps from Source to OHT (4 nos Pump sets including 100% stand-by) |
| 210 | Electric driven vertical submersible pump set(SD) of 3-phase having Head of 68 mtr & Discharge 1.80 LPS, Kirloskar,KSB,LUBI make. (3 HP) |
| 211 | Supplying ,installing commissionig & testing of ISI marked Motor control panel board suitable for above pump set with suitable volt meter & Ampere meter (if not in the control pannel volt meter & Ampere meter will be fitted separately). |
| 212 | Supplying ,installing commissionig & testing of ISI marked 100 AMP main switch suitable for above pump set . |
| 213 | 25 sq. mm Armoured 4 core Aluminium cable reputed make . |
| 214 | 6 sq. mm copper Submersiable flat cable reputed make like . |
| 215 | M.S.Angle frame with suitable nut & bolt with painting.for pannel boards. |
| 216 | Double ended Flanged G.I Pipe of 50mm dia.D/F of medium quality with required nut,bolt,rubber insertion. |
| 217 | Supplying all labour T&P for lowering of pump and motor into production well up to the required depth including jointing to rising main,cable jointing with required materials & cost of transportation to site etc.all complete as per direction of Engineer in charge. |
| 218 | 50 x 80 mm both side flanged G.I tapper of 0.40 mtr. Length.. |
| 219 | 50 mm x 90 degree G.I Bend D/F of size ( .30 x .30 ) m |
| 220 | Supplying, fabricating and fixing MS Angle Supports 50 mm × 50 mm × 6 mm, 1.0 m long, including drilling, welding, and fixing 12 SWG (2.64 mm) GI Barbed Wire over the existing 80 Meter boundary wall, including binding wire, clamps, fixing accessories |
| 221 | Supply of all labour T & P, material for soil testing, supply of design, drawing, construction, errection, testing & commissioning etc of RCC elevated storage reservoir with dome using RCC M25, 2 nos. ISI marked suitable dia sluice valve , 1No of suitable dia butter fly valve & it’s RCC valve chambers as per approved drawing , supplying fitting & fixing of suitable medium grade GI pipe make confirming to IS specification of required length from percolation well to ESR & ESR to distribution main including CI/GI for in-let, out let, over flow& washing line of ESR, RCC stair case with suitable dia structural stainless with suitable dia structural stainless steel hand rail around dome & landing etc. And stainless steel ladder outside & aluminium ladder inside, lightening arrester confirming to IS specification water level indicator. (Construction of Duck Bed above the ground level for supporting of Inlet and Outlet Pipe & Clamping of all the pipe with the Column)-(60 KL ESR OF 15 MTR STAGGING) |
| 222 | Raising Main & Distribution SystemSupplying of all labour T & P for Earth work excavation in trenches for DI/ HDPE pipe lines in all kinds of soils within 50 M initial lead & 1.5 M intial lift including rough dressing and breaking clods to maximum 5 cm to 7 cm & laying in layers not exceeding 0.3 m in depth etc all complete as per the direction of engineer in-charge.(160 mm HDPE pipe ,110 mm HDPE pipe ,90 mm HDPE Pipe ) |
| 223 | Supplying of all labour T & P for filling in foundation trenches with excavated materials as directed by the Engineer-In-Charge of earth work for cum (Ordinary Soil) |
| 224 | Supplying all material labour ,T&P & laying in trenches HDPE pipes conforming to IS 4984-1995 and specials of following Out side diameter and class-1 to class-3 and jointing by fusion welding method including testingas per specification complete. and as per the direction of engineer in charge . Including all Fittings and fixing.(90 mm HDPE pipe (PN-10)) |
| 225 | Supplying all labour ,T&P & laying and jointing GI pipes, fittings & specials of approved make excluding earthwork in excavation & refilling of trenches & including cost of pipe as per specification,transportation,taxes, & testing of pipe etc & febrication in case of metalic pipe all complete and as per the direction of engineer in charge |
| 226 | 100 mm GI pipe (MEDIUM) |
| 227 | 80 mm GI pipe (MEDIUM) |
| 228 | Supplying all material labour ,T&P & laying in trenches HDPE pipes conforming to IS 4984-1995 and specials of following Out side diameter and class-1 to class-3 and jointing by fusion welding method including testingas per specification complete. and as per the direction of engineer in charge . Including all Fittings |
| 229 | 110 mm HDPE Pipe (PN-6) |
| 230 | 90 mm HDPE Pipe (PN-6) |
| 231 | Supply all labour T&P fitting and fixing of C.I sluice valves with double flanged ends in the water line for controlling purposes conforming to IS: 14846-2000 for the following rating and nominal diameters as per specifications complete of approved make with supply of all joining materials, T&P etc all complete including cost of all materials and fittings etc all complete as per direction of engineer-in-charge. |
| 232 | 80mm CI Sluice Valve |
| 233 | 100 mm CI Sluice Valve |
| 234 | 100 mm CI NR Valve |
| 235 | Supply and fitting & fixing of CI Air Valve of approved make with supply of Jointing materials T&P etc all complete as per the direction of Engineer-In-Charge. |
| 236 | 15mm Air Valve |
| 237 | Supply all labour T&P fitting and fixing of construction of Valve Chamber for Sluice Valve & NR Valve complete as directed by the engineer in-charge.. |
| 238 | Supply all labour T&P fitting and fixing of construction of Valve Chamber for Air Valve complete as directed by the engineer in-charge.. |
| 239 | Dismantling the C.C roads and removing including stacking the useful materials for reuse and removing the debris within 50m. Lead including all labour & T&P required for the work complete as directed by the engineer in-charge. (560 mtr x 0.41 mtr x 0.20 mtr) |
| 240 | Supplying all labour T&P for cement concrete (1:2:4) with 12mm size hard granite chips per 1 cum. ( ref pg no.44, SL -7, analysis of rates) (560 mtr x 0.41 mtr x 0.20 mtr) |
| 241 | Supply all labour T&P fitting,fixing and Installation of Functional Household Tap Connection from the existing ferrule point to the household Premises. |
| 242 | Supply all labour T&P fitting and fixing of construction of Stand alone for Govt. Institution.(1000Ltr. Storage) |
| 243 | Supply all labour T&P fitting and fixing of construction of Stand post complete as directed by the engineer in-charge. |
| 244 | Supply all materials, labour, T& P and providing and fixing IEC hoarding board of size 1.00m (4') x 0.91m (3'). The hoarding frame 25mm x25mm x 3mm thick hollow square stainless stell bar supporting with 25mm x 25mm x 2mm size stainless steel bar in middle- 2 nos. covered with 1.6mm thick steel plate, fixing of IEC Message over teh board (Flex banner of 6' x 4' size) as per desing specification including 2 nos. 55mm dia stainless steel pipe of 2mm thickness support pillar including earthwork in excavation in foundation in all kids of soil, Cement concrete (1:2:4) with 12 mm size HG chips with cost. carriage, royality and taxes of all materials, welding, buffing, polishing and labour etc. all complete as per direction of Enginner in Charge. |
| 245 | MAINTENANCE COST FOR 5 YEAR (5% OF TOTAL CIVIL COST) RPWS TO ZONE-I VILL:JHARIGAON (DHONODAMAL) |
| 246 | MAINTENANCE COST FOR 5 YEAR (5% OF TOTAL CIVIL COST)RPWS TO ZONE-II VILL:JHARIGAON ((BALAJI SAHI) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender