Tender For Painting Of Exterior / Internal Walls Of Bunglows, Supply Of Furniture, Aluminium Door And Flooring And Other Allied Works At Hlg Residence 7 Akbar Road New Delhi
Tender Value
14.12 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
4 days left
EMD
28240
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Painting Of Exterior / Internal Walls Of Bunglows, Supply Of Furniture, Aluminium Door And Flooring And Other Allied Works At Hlg Residence 7 Akbar Road New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Removing dry or oil bound distemper, waterproofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 2 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 3 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 4 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 5 | 1 mm thick |
| 6 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface |
| 7 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 8 | Finishing walls with Acrylic smooth exterior paint of required shade: 13.119.1 Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface |
| 9 | P/A Velvet touch wall paint (Dulux) two or more coats over a base coat of cement putty and primer (cement putty and primer shall be paid separately) |
| 10 | Disposal of Malba from site to designated place beyond NDMC Limits. |
| 11 | French spirit polishing, Two or more coats on new works including a coat of wood filler |
| 12 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below: 1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs. 3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs. 4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time |
| 13 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 14 | Removing of Existing POP, Plaster and exposing the wall till brick walls along with racking of joints to prepare it for fresh plaster. |
| 15 | 20mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 coarse sand) |
| 16 | Providing and laying vetrified tiles on walls (thickness not less than 10 mm), of approved make, in all colours, shades of any size not less than 600 mm X 1200 mm as approved by Engineer- in-Charge, in floor and steps over 20 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing with epoxy grout mixed with pigment of matching shade complete along with spacers. Basic rate of tile shall not be less than Rs. 80 per sft. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender