Tender For Construction Of Guestroom Including Lobby,Kitchen And Bathroom At Surnikund Near Shankhpal Temple Pyt Bhattan Block Gandhri Under Head Abdp For The Year 2026-27Nit No:- 41 Of Rew 2026-27
Tender Value
24.50 Lakhs
Estimated cost
Bid Submission
04 Sep 2026
3 days left
EMD
49000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ramban → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Guestroom Including Lobby,Kitchen And Bathroom At Surnikund Near Shankhpal Temple Pyt Bhattan Block Gandhri Under Head Abdp For The Year 2026-27Nit No:- 41 Of Rew 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:25 meter beyond 1 m from cutting edge |
| 2 | Supplying and laying of stone soling hand packed tightly including ramming, watering. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) Raft |
| 5 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 8 | Providing and Laying Damp Proof course 50 mm thick with cement mortar in 1:2:4 mix, 20mm nominal size of aggregate and curing complete |
| 9 | Cement concrete flooring 1:2:4 (1Cement: 2 coarse sand: 4 graded stone aggregate). 50 mm thick 12.50mm nominal size stone aggregate (crushed) including glass strips at a squared interval of 5'x5' |
| 10 | Brick work with FPS bricks of class designation 75 in super structure in cement mortar 1:6 (1Cement : 6 Coarse sand) (including Extra Brick Work) |
| 11 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 gradedstone aggregate 20 mm nominal size). |
| 12 | Providing wood work in frames of Doors,windows, clerestory window and other frames,wrought frames and fixed in position. Second class kail wood |
| 13 | Providing and fixing 30 mm thick glazed shutter for windows and clearstory windows using 10kg/sqm (4mm thick)glass panes including black enamelled ISI marked M.S hinges with necessary screws. Second class kail wood |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood(KD) and well matched teak face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick |
| 15 | Providing and fixing 30 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge, imported (KD) wood |
| 16 | Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete 150 mm tower Bolts (D) |
| 17 | Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete 100 mm tower Bolts (D) |
| 18 | Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete Link/Godrej Al Drop Lock type |
| 19 | Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete Simple Aldrop |
| 20 | Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete 125mm Handle |
| 21 | Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete 100mm Handle |
| 22 | Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete bright finished brass hard drawn hooks and eyes 150 mm |
| 23 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 24 | Reinforcement of RCC works including straightening, cutting, bending placing in position and binding all complete. TMT bars |
| 25 | Filling by Available excavated earth (excluding rock) in trunches,plinth,sides of fondation etc, in layers not exceding 20 Cm in depth ,consolidation each deposited layer by ramming and watering lead upto 50m and lift upto 1.5 m. |
| 26 | 12 mm thick plaster in Cement Mortar 1:6 mix |
| 27 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood |
| 28 | Providing and fixing 12mm thick ply ceiling (frame work for base to be paid for separately) with M.S. screws |
| 29 | Structural steel work welded in built up sections, trusses and frame work including cutting, hoisting fixing in position and applying a priming coat of approved steel primer all complete in angles / flats / tubes / channels etc. |
| 30 | Providing C.G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape. 0.50mm thick |
| 31 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 32 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 34 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 35 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 36 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS :·13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA, or equivalent make in all colour, shade except begundy, bottle green, black of any size as approved by Eningeer in- Charge in skirting, risers of steps and dados over 12mm thick bed of Cement Mortar 1:3 ( 1 cement: 3 coarse sand) and jointing wtih grey cement slurry@ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 37 | Providing and fixing Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 13755 of NITC.O, ORIENT, SOMANY, KAJARIA or equivalent make in colour such as White, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of Cement Mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc.,complete. |
| 38 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 39 | Marble work gang saw cut (polished and machine cut) of thickness 16 mm for wall lining (veneer work) backing filled with a grout of 12 mm thick average in cement mortar 1:3 (1 cement: 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).Raj Nagar plain white marble/Udaipur green marble/zebra black marble |
| 40 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia |
| 41 | Providing and fixing in position collapsible steel shutters with verticalchannels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steelpulleys, complete with bolts, nuts, locking arrangement, stoppers,handles, including applying a priming coat of approved steel primer. |
| 42 | Providing and fixing PPR pipes complete with fittings and clamps including cutting chases and making good the walls etc, 16 mm dia |
| 43 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes i/c ball cock |
| 44 | Providing and fixing ball valve (brass of approved quality complete: 20mm nominal bore |
| 45 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 46 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 47 | P/F Door Tee 100 mm dia PVC of Approved make type B |
| 48 | P/F Plain Bend 100 mm dia PVC of Approved make type B |
| 49 | P/F 100 mm dia PVC Collar of Approved make type B |
| 50 | P/F 75 mm dia PVC Collar of Approved make type B |
| 51 | P/F Soil Waste Disposal Pipes 100 mm complete job |
| 52 | P/F Soil Waste vent Pipes 75 mm complete job |
| 53 | P/F PVC cowel cover over vent pipe of approved quality |
| 54 | P/F 100x75 mm reducer PVC of approved quality |
| 55 | P/F MS stays and clamps for pvs pipes 75 mm |
| 56 | P/F Brass angle valve of approved quality |
| 57 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board (610x460mm bowl depth 200mm) |
| 58 | Providing and fixing brass bib cock of approved quality.20 mm nominal size |
| 59 | P/F of lighting points which shall incl wiring for lighting points in 1.5 sq mm PVC insulated multi strand copper wire & 2.5 sq mm PVC insulated multistrand copper wire for lighting submains, 6 amp oneway switch, 2mm thick PVC conduit with bends, junction boxes etc 6 Amp S pole MCB, 10 Amp DP MCB, 2 way DB for housing MCB and Hylen sheets recessed in walls with accessories, complete job. |
| 60 | P/F of Heating points which shall incl wiring for lighting points in 2.5 sq mm PVC insulated multi strand copper wire & 4 sq mm PVC insulated multistrand copper wire for heating submains, 16 amp switch socket combined , 2mm thick PVC conduit with bends, junction boxes etc 10 Amp S pole MCB, , 2 way DB for housing MCB and Hylen sheets recessed in walls with accessories, complete job. |
| 61 | P/F of Fanpoints which shall incl wiring for fan points in 1.5 sq mm PVC insulated multi strand copper wire,1200 mm ceiling fan with ceiling rose& PVC Square block 350 watt electronic fan dimmer, 2mm thick PVC conduit with bends, junction boxes etc 6 Amp S pole MCB, 10 Amp DP MCB, 2 way DB for housing MCB and Hylen sheets recessed in walls with accessories, complete job. |
| 62 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted complete |
| 63 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement:3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over75mm thick bed of dry brick ballast 40mm nominal size, well rammed. |
| 64 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete,Fixed to openings / wooden frames with rawl plugs screws etc |
| 65 | Carriage of cement, Reinforcement, structural steel, CGI sheets |
| 66 | Carriage of Sand |
| 67 | Carriage of Stone /Agg 40mm / 20 mm |
| 68 | Carriage of Bricks |
| 69 | CIB (citizen information board)size 2'6\\" x 3' 6\\" x 0' 9\\"(above plinth level)with tepered top havind 20 degree slope in Brick masonary with Granite Stone having Engraved letters including plaster , paint ,leterring and logos (photographs) as per instruction of Engineer-in-charge including carriage of material (complete job) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender