Public Administrative Department Government Departments Closing in 2 days TDR #57166772

Tender for Tender for Construction Work Of The Wedding Hall In Gram Panchayat Naharaiya

Issued by Government Departments · Farrukhabad, Uttar Pradesh
Tender Value
19.12 Lakhs
Estimated cost
Bid Submission
27 Aug 2026
2 days left
EMD
38300
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Farrukhabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Work Of The Wedding Hall In Gram Panchayat Naharaiya

BOQ

Name of Work:- Construction work of the wedding hall in Gram Panchayat Naharaiya
Sl. No. Item Description
1Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.2.6.1 All kinds of soil.
2Earth work in filling in trenches or embankment in layers with intermediate layer of compacted earth i/c compacting each laye by rolling / ramming and watering i/c complete of work
3Plan cement concrete in 1:4:8 with 1 cement ,4 C/sand derived from natural sources 8 graded stone aggregate 40 mm nominal size derived from natural sources .i/c all complete
4Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: 6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand)
5Brick work with common burnt clay F.P.S(Non modular) brick of class designation 7.5 in 1;6 cement & c.sand mortor in superstructure above plinth level upto floor V level in all shapes and size i/c all complete.
6Half brick masonry with common burnt clay F.P.S (non mudular ) bricks of class designation 7.5 in superstructure above plint up to floor V level.
7Providing and laying in position specified grade of reinforced cement concrete, excluding the Cost of centering, shuttering, finishing and reinforcement - All work up to plinth level ,1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
8Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
9Providing and laying in position reinforced cement concrete(1:1.5:3 with cement, c/sand & 20mm stone grite of specified grade excluding the cost of centring,shuttering,finishing & reinforcement in Sill bend, Door bend, Sunshed, column , Beam & Roof slab.
10Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. ic plinth Beam
1120mm thick plaster cement concrete topping 1:3(1 cement 3 course sand) laid over & finished with floating coat of neat cement monolithic with structure slab
1240mm thick Cement Concrete Flooring Apron with 1:2:4(1 cement: 2 c/sand: 4 graded stone aggregate) finished with a floating coat of neat cement, i/c cement slurry compete. 20 mm nominal of stone aggregate.
13Providing and laying virtified floor tiles in different size (thickness to be specified by the manufacturer) with water absorption less than .08% and approved make in all colour and shades, laid on 20mm thick cement mortar 1:4 (1 cement:4 c/sand),jointing with grey cement slurry @ 3.3 kg/sqm i/c grounting the joints with white cement sizes of tiles 600x600mm
14Providing and laying rectified glazed ceramic floor tiles of size 300X300mm or more(thickness to be specified by the manufacture) of 1st quality conforming to IS : 15622 of approved,make,in all colours, shades,except white,Ivory,grey,fume red brown,laid on 20 mm thick cement mortar 1:4(1 cement:4 coarse sand), jointing with grey cement slurry @3.3 kg/sqm including pointing the joints with white cement and matching pigments etc.complete
1512mm thick plaster with 1:6 ratio cement & c/sand i/c all labour & material etc all compt work
16P/laying in cement conrete in bed, blocks, anchor blocks plain winodw sill etc upto floor five level.In1:2:4 ( Cement, C/sand stone aggregete with 20mm nominal size stone grit) (Holdfast)
17Steel work welded in built up sections / framed work , i/c cutting , hoisting , fixing in position and applying a priming coat of approved steel primer using structural steel etc.
18P/Applying white cement based putty of average thickness of 1 mm, of approved brand & manufacture over the plaster wall surface to prepare the surface even & smooth including cost of material, labour & T&P Etc. all complete
19Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :
20Finshing walls with Premimum Acrylic smooth Exterior paint with silicon additives of required shade :New Work(Two or more coats applied @ 1.43 litre/10sqm over and i/c priming coat of exterior primer applied @ 2.2 kg/10sqm) i/c all complete work
21Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer . Painting steel work with Deluxe Multi surface paint to give an even shade. Two or more coat applied @ .90 litre/10 sqm over an under coat of primer of primer applied @ .80 litre/10sqm of approved brand and manufacture.
22Form Work , Centring and shuttering i/c strutting , propping etc and removel of from for lintels , beam plinth beams girders bressumers and cantilevers.with water proof ply 12mm thick
23Form Work , Suspended floors, roofs landings, balconies and access platfrom
24Providing and Fixing Project Informatory board as specified including all complete.
25Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. (110 mm diameter)
26Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc..( 15 mm nominal dia Pipes)
27Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.(25 mm diameter)
28Providing and fixing brass bib cock of approved quality (15 mm nominal bore)
29Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
30Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require(White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap)
31Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
32Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
33Providing and fixing of 100 mm PVC pipe with all fitting including all complete as specified.
34Providing and fixing of 75 mm CPVC pipe with all fitting including all complete as specified.
35Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
36Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms.
37Cartage of handpump machine with 110/63mm pvc pipe , cement i/c all material etc
38Cost of supply of neccessory material for handpump establishment Handpump machine set
39110mm pvc pipe @ 8kg/rm
40Cost of supply of neccessory material for handpump establishment 63 mm pvc pipe @ 8kg/rm
4163 mm strainer i/c blind pipe (4.00m)
42Cost of supply of neccessory material for handpump establishment 110mmx63mm reducer
43Cost of supply of neccessory material for handpump establishment 32mm G.I pipe
44Boring work with palm & pressure method i/c all compt etc
45150mm dia boring work 0&30
46150mm dia boring work 30&50
47Lowering work pvc pipe assembly i/c all compt 0&30
48Lowering work pvc pipe assembly i/c all compt 30&50
49Supply of coarse sand & filling around strainer
50Fixing of india marka handpump with G.I pipe with connecting rod
51Making plateform with material
52Nylone Cloth
53Cable
54Strater
55Joint
56Doveloping of bore item
57Submersible pump
58Wiring point for light with 1.5 sqmm FR PVc inulated multitrend single core copper conductor as Per E.S.O.R.121 C
59Wiring point for fan /Freh air fan ( Light duty )exhaut fan) with 1.5 sq mm as per E.S.O.R 123 C
60Wiring point for Power Plug as per E.S.O.R 1139 A
61Supply & fixing of L.E.D. LIGHT
62Wiring point for Plug piano type switch as per E.S.O.R.No 124 c
63Supply & Fixing of 6 amp to 32 amp M.C.B as per E.S.O.R 1002
64Supply & Fixing of ceiling fan
65Election & Testing of celling fan & Regulator etc.Excluding supply of down rod complete in all respects
66Supply & Fixing of M.S. box 250x250x65 as per E.S.O.R 163
67Supply and fixingof LED Tube Lightwith batten suitablefor up to 1 X 22 watt LED tube light complete includingtube etc on surface complete in all respect.
68S&F surface/flushmounting4 ways SPN distributionboard with additional metal door without MCB complete in all respect, as directed at site by Engineerin charge.
69Providing & fixing fan Regulator including all complete,
70Supply & fixing of fan box including all complete, Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57166772
AUTHORITY Government Departments
TENDER VALUE 19.12 Lakhs
LAST DATE 27-08-2026
Authority
Authority Name Rural Engineering Department
Work Description Tender for Construction Work Of The Wedding Hall In Gram Panchayat Naharaiya
Basic Detail
Tender No 264/EERED/NIT/2026-27
Bidding Type Tender
Location
City Farrukhabad
State Uttar Pradesh
Key Dates
Publish Date 22 Aug 2026
Submission Date 27 Aug 2026
Open Date 27 Aug 2026
Finance
Tender Value 19.12 Lakhs
Tender Fee 944
EMD 38300
Exemption Not Available
Document List
1c6cad9d-32d7-4f15-9309-fdcc1e431b32.html
264NIT.pdf
BOQ_2214576.xls
Tendernotice_1 (60).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 22, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Aug 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

1c6cad9d-32d7-4f15-9309-fdcc1e431b32.html

pdf

264NIT.pdf

xls

BOQ_2214576.xls

pdf

Tendernotice_1 (60).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders