Tender For Construction Of Farm Gate Market At Lawmei, Shilliang Um, East Khasi Hills District
Tender Value
83.85 Lakhs
Estimated cost
Bid Submission
25 Sep 2026
29 days left
EMD
1.67 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Farm Gate Market At Lawmei, Shilliang Um, East Khasi Hills District
BOQ
| Sl. No. | Item Description |
| 1 | GODOWN-CUM-COLD ROOM (2 nos) |
| 2 | Earthwork in excavation by manual means upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils(b) In ordinary rock (Soft rock/ medium rock/ hard shale) |
| 3 | Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(b) Stone soling(i) 100mm. |
| 4 | Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified inckuding dewatering if necessary and curing complete (shuttering where necessary hall be measured and paid seperately).(b)1:3:6 (1 cement: 3 coarse snad: 6 graded stone aggregate 20mm nominal size) |
| 5 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1-cement, 6 coarse and 12 graded stone aggregate 20mm nominal size) upto plinth level with:(a) Cement mortar 1:6 (1 cement:6 coarse sand) |
| 6 | Providing and laying in position specified of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level:(a) M15 or Prop 1:2:4(1 cement: 2 coarse snad: 4 graded stone aggregate 20mm nominal size) |
| 7 | Supplying, fitting and fixing in position reinforcement bars up to 1st floor level, conforming to relevant I.S Code for RCCR.B walling including straightening, cleaning, cutting and bending toproper shapes and length as per detailss, supplying and binding with 20G annealed black wire and palcing in position with proper blocks, support, chairs, spacers etc complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc and no measurement for the same is required).(c) Themo- Mechanically Treared bars |
| 8 | SHUTTERING/ FORMWORKCentering and shuttering including strutting, propping etc. and removal of form of all heights complete and as directed by Engineer in charge. |
| 9 | Columns, Pillars, Piers, Abutments, Posts and Struts (using steel). |
| 10 | Foundations, footings, bases of columns, etc for mass concrete (using steel) |
| 11 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12mm thick |
| 12 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level upto 1st floor level, excluding cost of centering, shuttering, finishing and reinforcement:(a)M15 or Prop 1:2:4(1 cement: 2 coarse snad: 4 graded stone aggregate 20mm nominal size) |
| 13 | Brick work in cement mortar including racking with first class brick in super structure above plinth up to first floor level in all shape and sizes:(b) Cement mortar 1:6 (1 Cement : 6 Coarse sand) |
| 14 | CEMENT PLASTER (IN FINE SAND)15 mm cement plaster on the rough side of single or half brick wall of mix:(a) 1:4 (1 cement :4 fine sand) |
| 15 | Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15x3x100mm lugs embedded in cement concrete block of M-10 grade including aproviding and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12x12 mm square bars duly welded to steel frame at not more than 12mm c/c applying a priming coat of red- lead paint etc complete as per drawing. Opendable |
| 16 | Float glass panes(a) 4 mm thick glass pane (weight not less than 10 kg/sqm). |
| 17 | Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454- part-1 and M.S. top cover of required thickness for rolling shutters.(a)80x1.25 mm M.S. laths with 1.25mm thick top cover |
| 18 | Providing and fixing ball bearing for rolling shutters |
| 19 | Extra for providing mechanical device chain and crank operation for operating rolling shutters |
| 20 | Steel work in built up tubular (round, square or rectangular hollow tubes etc) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 21 | Providing corrugated G.S galvanised Iron sheet roofing including vertical/ Curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia with bitumen and G.I. limpet washer or G.I limpet washers filled white lead, including a coat of approved steeland two coats approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlin, rafter and trusses and including cutting to size and shape wherever required(g) 0.45 mm thick with zinc coating not less than 275 gm/ sqm |
| 22 | Providing ridges or hips of width with 60cm overall width plain G.S sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia with G.I. limpet and bitumen washers complete.(f) 0.45 mm thick with zinc coating not less than 275 gm/ sqm |
| 23 | Earthwork in filling (excluding rock) in trenches, plinth, sides of foundation etc in layers not exceeding 20cm thick including breaking of clods, consolidating each layer by ramming and watering, lead upto 50m and lift upto 1.5m.(a) With available excavated earth |
| 24 | 65 mm thick cement concrete flooring with concrete hardener topping: under layer 50 mm thick cement concrete in prop. 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) and top layer 15 mm thick cement harderner consisting of mix 1:2 (1cement harderner mix: 2 graded stone aggregate, 6mm nominal size) by volume, harderning compund mixed @ 2 litre per 50 Kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, complete. |
| 25 | Cement concrete floor topping 1:1:2 ( 1 cement: 1 Coarse sand: 2 stone aggregate) finished with floating coat of neat cement, icluding cement slurry, complete.(ii) 20 mm thick |
| 26 | White washing with lime to given an even shade:(a) New work (three or more coats) |
| 27 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding:(c) Painting Steel work with Deluxe Multi surface Paint to give an even shade. Two or more coats applied @ 0.90 ltr/ sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 28 | PUBLIC TOILETS (2 nos) |
| 29 | Earthwork in excavation by manual means upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils(b) In ordinary rock (Soft rock/ medium rock/ hard shale) |
| 30 | Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(b) Stone soling(i) 100mm. |
| 31 | Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified inckuding dewatering if necessary and curing complete (shuttering where necessary hall be measured and paid seperately).(b)1:3:6 (1 cement: 3 coarse snad: 6 graded stone aggregate 20mm nominal size) |
| 32 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1-cement, 6 coarse and 12 graded stone aggregate 20mm nominal size) upto plinth level with:(a) Cement mortar 1:6 (1 cement:6 coarse sand) |
| 33 | Providing and laying in position specified of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level:(a) M15 or Prop 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) |
| 34 | Supplying, fitting and fixing in position reinforcement bars up to 1st floor level, conforming to relevant I.S Code for RCCR.B walling including straightening, cleaning, cutting and bending toproper shapes and length as per detailss, supplying and binding with 20G annealed black wire and palcing in position with proper blocks, support, chairs, spacers etc complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc and no measurement for the same is required).(c)Themo- Mechanically Treared bars |
| 35 | SHUTTERING/ FORMWORKCentering and shuttering including strutting, propping etc. and removal of form of all heights complete and as directed by Engineer in charge.Columns, Pillars, Piers, Abutments, Posts and Struts (using steel). |
| 36 | Foundations, footings, bases of columns, etc for mass concrete (using steel) |
| 37 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12mm thick |
| 38 | Slabs, roofs, landings, balconies and access platforms, shelves (using steel) |
| 39 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, fillets, columns, pillars, posts and struts etc. above plinth level upto 1st floor level, excluding cost of centering, shuttering, finishing and reinforcement:(a)M15 or Prop 1:2:4(1 cement: 2 coarse snad: 4 graded stone aggregate 20mm nominal size) |
| 40 | Brick work in cement mortar including racking with first class brick in super structure above plinth up to first floor level in all shape and sizes:(b) Cement mortar 1:6 (1 Cement : 6 Coarse sand) |
| 41 | CEMENT PLASTER (IN FINE SAND)15 mm cement plaster on the rough side of single or half brick wall of mix:(a) 1:4 (1 cement :4 fine sand) |
| 42 | Providing polished VITRIFIED wall tiles of approved quality, size, shape and thickness not less than 8mm on walls and skirting over cement mortar bed 10mm thick in prop 1:3 (1 Cement : 3 Coarse sand) including cutting where necessary finished with flush pointing with adhesive or white cement slurry mixed with approved pigment to match shade of tiles complete at all levels as specified and directed.(b) Premium range |
| 43 | Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15x3x100mm lugs embedded in cement concrete block of M-10 grade including aproviding and fixing of projecting hinges (not more than 65mm and not less than 15mm wide) bolting device, steel handles, pegs, stays of 300mm long etc. complete including providing 12x12 mm square bars duly welded to steel frame at not more than 12mm c/c applying a priming coat of red- lead paint etc complete as per drawing. opendable |
| 44 | Float glass panes(a) 4 mm thick glass pane (weight not less than 10 kg/sqm). |
| 45 | Providing wood works in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diameter & length.(C) With 1st Class Local wood(ii) Champa/ Diengrai |
| 46 | Providing and fixing panelled or panelled and glazed shutter for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid seperately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid seperately).(C) With 1st Class Local wood(ii) Champa/ Diengrai(i) 35mm thick shutters |
| 47 | Providing and fixing factory made PVC door frame size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided throughout the fframe. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size complete as per manufacturer's specification and direction of Engineer-in-charge |
| 48 | Providing and fixing factory made panel PVC door shutter consisting of frame made of M.S. tubes of 19 gauge thickness and size of 19x19 mm for stiles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming stiles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both side to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, panelling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 7 mm (5 mm + 2mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strop of 20 mm width is to be stuck on the interior side of the 'C' channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing.(a)30 mm thick plain PVC door shutters |
| 49 | Sand filling in plinth in layers not exceeding 150 mm thick including breaking of clods, consolidating by ramming and watering complete as directed. (Maximum depth 45 cm). |
| 50 | 65 mm thick cement concrete flooring with concrete hardener topping: under layer 50 mm thick cement concrete in prop. 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate of 20mm nominal size) and top layer 15 mm thick cement harderner consisting of mix 1:2 (1cement harderner mix: 2 graded stone aggregate, 6mm nominal size) by volume, harderning compund mixed @ 2 litre per 50 Kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, complete. |
| 51 | Cement concrete floor topping 1:1:2 ( 1 cement: 1 Coarse sand: 2 stone aggregate) finished with floating coat of neat cement, icluding cement slurry, complete.(ii) 20 mm thick |
| 52 | Providing Vitrified Antiskid Tiles of approved quality size, shape not less than 8 mm on floor, skirting over a cement mortar bed 15 mm thick of 1:3 (1 cement: 3 coarse sand ) complete at all level as specified and directed..(i) Normal range |
| 53 | White washing with lime to given an even shade:(a)new work (three or more coats) |
| 54 | Applying priming coat:With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) with ready mixed aluminium primer of approved brand and amnufacture on resinous wood and plywood |
| 55 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding:(b) Painting wood work with Deluxe Multi surface Paint of required shade. Two or more coats applied @ 0.90 ltr/ sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture |
| 56 | (c) Painting Steel work with Deluxe Multi surface Paint to give an even shade. Two or more coats applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 57 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm |
| 58 | Providing and fixing ISI marked oxidised M.S. door latches conforming to IS: 5930 with screws etc complte: (a) 300x20x6 mm |
| 59 | SEPTIC TANK (50 USERS) (2 nos) |
| 60 | Earthwork in excavation by manual means upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils(b) In ordinary rock (Soft rock/ medium rock/ hard shale) |
| 61 | Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(b) Stone soling(i) 100mm. |
| 62 | Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified inckuding dewatering if necessary and curing complete (shuttering where necessary hall be measured and paid seperately).(b)1:3:6 (1 cement: 3 coarse snad: 6 graded stone aggregate 20mm nominal size) |
| 63 | Brick work with common burn clay modular 1st class bricks in foundation and in plinth(a) Cement mortar 1:4 (1 Cement : 4 Coarse sand) |
| 64 | SHUTTERING/ FORMWORKCentering and shuttering including strutting, propping etc. and removal of form of all heights complete and as directed by Engineer in charge. |
| 65 | Walls (any thickness) including attached pilasters, buttresses plinth and string courses etc (using steel) |
| 66 | Supplying, fitting and fixing in position reinforcement bars up to 1st floor level, conforming to relevant I.S Code for RCCR.B walling including straightening, cleaning, cutting and bending toproper shapes and length as per detailss, supplying and binding with 20G annealed black wire and palcing in position with proper blocks, support, chairs, spacers etc complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc and no measurement for the same is required).(c)Themo- Mechanically Treated bars |
| 67 | Providing and laying in position specified of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plinth level:(a) M15 or Prop 1:2:4(1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) |
| 68 | 20 mm cement plaster of mix:(a) 1:4 (1 cement :4 fine sand) |
| 69 | Making soak pit 2.5 m diameter 3.0 metre deep with 45x45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 long complete as per standard design. |
| 70 | GARBAGE DISPOSAL (2 nos) |
| 71 | Earthwork in excavation by manual means upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils(b) In ordinary rock (Soft rock/ medium rock/ hard shale) |
| 72 | Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(b) Stone soling(i) 100mm. |
| 73 | Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified inckuding dewatering if necessary and curing complete (shuttering where necessary hall be measured and paid seperately).(b)1:3:6 (1 cement: 3 coarse snad: 6 graded stone aggregate 20mm nominal size) |
| 74 | Brick work in cement mortar including racking with first class brick in super structure above plinth up to first floor level in all shape and sizes:(b) Cement mortar 1:6 (1 Cement : 6 Coarse sand) |
| 75 | CEMENT PLASTER (IN FINE SAND)15 mm cement plaster on the rough side of single or half brick wall of mix:(a) 1:4 (1 cement :4 fine sand) |
| 76 | Cement concrete floor topping 1:1:2 ( 1 cement: 1 Coarse sand: 2 stone aggregate) finished with floating coat of neat cement, icluding cement slurry, complete.(ii) 20 mm thick |
| 77 | White washing with lime to given an even shade:(a)new work (three or more coats) |
| 78 | INTERNAL ELECTRIFICATION (1 no.) |
| 79 | Wiring in looping system with copper PVC cable 250/440 volt grade of size 1.5 sqmm of approved quality using PVC casing capping including 5 amperes switch Indian best quality ceiling rose etc. capable to a highest point(a) Long point wiring upto 10mts |
| 80 | Wiring to a power plug as in item No.1 above with continous earth wire complete.(b)Long Point wiring upto 10mts |
| 81 | Wiring as in item No.1 above to a Ceiling /Exhaust Fan Point (b)Long point wiring upto 10mts |
| 82 | Drawing of Main and Sub-main line with DGSD approved VIR or PVC 250/440 Volt grade in PVC casing capping complete with all accessories.(a) With 2×2.5mm2 Copper Conductor |
| 83 | Drawing of 3 phase main line 4 wire with DGSD approved VIR or PVC cable 660Volt grade Copper Conductor in casing Capping with all accessories.(b)With 4×4 mm2 Copper Conductor |
| 84 | (e)With 4×16 mm2 Copper Conductor |
| 85 | Supplying fitting & fixing complete 240/415V Al Bus Bar ChamberA Economy sheet steel + Neutral 240/410V (ii) TPN 4 Ways(c) 100Amp 41 5V Capacity |
| 86 | Supplying & fixing of Load Kontaket Miniature Circuit Breakers DX3 application till 63 A B. Single pole + Neutral 240 b) 6-32 Amp |
| 87 | Supplying fitting and fixing DX3 isolators for AC applications upto 125A (B)Triple pole 415v(d) 100 Amp |
| 88 | A. Double pole 240V (a) 32 Amp |
| 89 | Supplying fitting and fixing Distribution Board Ekinox³ TPN DB-VTPN for DX³ MCB DB's (A)IP 30-# 1K 08 (a) 4 Way 8+12 Module |
| 90 | Supplying fitting, fixing complete polish brass bracket, 16mm dia and 23 cm long with cast backplate and brass lamp holder with LED bulb surface or wall mounted with all necessary accessories.(a) Bulb(v) 12W |
| 91 | Supplying fitting & fixing LED RETROFIT LAMPS surface or wall mounted with all necessary accssories(c) Photon ultra Led tubelight Single side Connection(i) 20 W |
| 92 | Supplying fitting & fixing STREET LIGHT surface or wall mounted with all necessary accessories.(a )LED street light made up pressure die cast aluminium housing with high efficient led as lighting source and PC cover having top opening(iii) 30W suitable for pole ф 43mm (max) |
| 93 | Supplying fitting and fixing of exhaust fan double bearing self lubricating type single phase 50Hz 250V AC operated complete with supporting frame, fan blades, nuts and bolts and other5 petty. accessories as required(b) Heavy Duty Exhaust Fan(i) 300 mm (12\\"X 1400 RPM |
| 94 | Supplying fitting & fixing earthing with copper earth plate 600X 600mm X 6mm thick including accessories & providing masonry enclosure with cover plate having locking arrangement & watering pipe etc with charcoal, salts etc complete as required. (a) Copper earth plate electrode |
| 95 | Supplying fitting & fixing complete domestic mini single phase 1(Hp) monoblock water pump set (e) 1.5HP (1.1Kw) |
| 96 | Supplying fitting & fixing complete switch fuse unit (SFU) Sheet Steel RewirableMain Switch with pre fitted Fuse wire 50 Hz 240/415 V B. 3 pole with neutral TPN 100 Amp 415 Capacity |
| 97 | WATER SUPPLY (1 no.) |
| 98 | Providing and fixing G.I. pipes complete with G.I. fitting including trenching and refilling etc.External work |
| 99 | 50mm nominal bore |
| 100 | 32mm nominal bore |
| 101 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal for hot & cold water supply, including all CPVC Plain & brass threaded fittings. This includes jointing of pipe & fittings with one step CPVC solvent cement, trenching,filling & testing of joints complete as per direction of Engineer-in-charge.External work(iii) 25 mm nominal outer diameter Pipes |
| 102 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal for hot & cold water supply, including all CPVC Plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing .This includes jointing of pipe & fittings with one step CPVC solvent cement, trenching,filling & testing of joints complete as per direction of Engineer-in-charge.Internal work Exposed on wall(ii) 20 mm nominal outer diameter Pipes |
| 103 | Providing and fixing water closet squatting pan (Indian Type W.C. pan) with 100mm sand cast iron P or S trap, 10 litres low level wide PVC flushing cistern, including flush pipe, with manual controlled device (handle lever) conforming to IS:7231 , with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:(a) White vitreous China or Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 104 | Providing and fixing white vitreous China Pedestal type water closet (European Type) with seat and lid, 10 litre low level wide vitreous Chin flushing cisterns & C.P . flush bent with fittings & C.I brackets, 40 mm flush bend, over flow arrangement with specials of standard make and mosquito proof coupling of approved design complete including painting and fittings and brackets, cutting and making good the walls and floors wherever required:(a)W.C. pan with ISI marked white solid Plastic seat and lid |
| 105 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:(i) With vitreous China Surgeon type wash basin of size 660x460 mm with single of 15 mm C.P. brass pillar taps with elbow including operated levers ISI Marked.. |
| 106 | Providing and fixing soil, waste and vent pipes:(a)100 mm diameter (i) Sand cast iron S & S pipe as per IS: 1729 |
| 107 | (a)75 mm diameter(i) Sand cast iron S & S pipe as per IS: 1729 |
| 108 | Providing and fixing toilet paper holder:C.P. brass |
| 109 | Providing and fixing 100mm sand cast Iron Grating for gully trap |
| 110 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 111 | Providing and fixing mirror of superior glass (of approved quality) and or required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing:(a) Circular shape 450 mm dia. |
| 112 | providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete with sand cast iron S&S as per IS: 1729:(a) 100 mm dia |
| 113 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete with sand cast iron S&S as per IS:1729/ IS: 3989: (a)100x100x100x100xmm |
| 114 | Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand) with R.C.C. top slab with 1:1.5:3 mix (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40 mm nominal size), inside palstering 12 mm thick with cement moratr 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size finished with a floating coat of neat cement complete as per standard design:(a)Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, toatal weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg): |
| 115 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 116 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931.(a) 15mm nominal bore |
| 117 | Providing and fixing C.P. brass long body bib cock of approved quality confroming to IS standars and weighing not less than 690 gms(a) 15mm nominal bore |
| 118 | Providing and laying cement concrete 1:5: 5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal) up to hauches of S.W. pipes including bed concrete as per standard design:(b)150mm dia SW pipe |
| 119 | DRAIN (1 no.) |
| 120 | Earthwork in excavation by manual means upto a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal of surplus earth with all lead and lifts as directed and specified for the following classification of soils(b) In ordinary rock (Soft rock/ medium rock/ hard shale) |
| 121 | Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete.(b) Stone soling(i) 100mm. |
| 122 | Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified inckuding dewatering if necessary and curing complete (shuttering where necessary hall be measured and paid seperately).(b)1:3:6 (1 cement: 3 coarse snad: 6 graded stone aggregate 20mm nominal size) |
| 123 | Supplying, fitting and fixing in position reinforcement bars up to 1st floor level, conforming to relevant I.S Code for RCCR.B walling including straightening, cleaning, cutting and bending toproper shapes and length as per detailss, supplying and binding with 20G annealed black wire and palcing in position with proper blocks, support, chairs, spacers etc complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc and no measurement for the same is required).(c)Themo- Mechanically Treated bars |
| 124 | SHUTTERING/ FORMWORKCentering and shuttering including strutting, propping etc. and removal of form of all heights complete and as directed by Engineer in charge. |
| 125 | Foundations, footings, bases of columns, etc for mass concrete (using steel) |
| 126 | Providing and laying in position specified grade of reinforced cement concrete, excluding cost of centering, shuttering, finishing and reinforcement - All works upto plinth level:(a) M15 or Prop 1:2:4 (1-cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size |
| 127 | CEMENT PLASTER (IN FINE SAND)15 mm cement plaster on the rough side of single or half brick wall of mix:(a) 1:4 (1 cement :4 fine sand) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 29 daysSep 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender