Tender For Construction Of Internal Partition At The Newly Acquired Area Of Domjur Ccc After Shifting From Old Building To New Administrative Building And Project Office At Domjur Administrative Building Under Howrah-Ii Division In The Dist. Of Howra
Tender Value
6.80 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
17 days left
EMD
14000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Howrah → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Internal Partition At The Newly Acquired Area Of Domjur Ccc After Shifting From Old Building To New Administrative Building And Project Office At Domjur Administrative Building Under Howrah-Ii Division In The Dist. Of Howrah
BOQ
| Sl. No. | Item Description |
| 1 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified color / natural) matt finished conformating to IS: 1868-1983 for fabrication of composite door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing film.Natural white.Movable door shutter. i) Door frame. (Top & sides). |
| 2 | ii) Shutter : Top rail. |
| 3 | Bottom rail. |
| 4 | Lock rail |
| 5 | Door vertical. |
| 6 | Glazing clip |
| 7 | iii) Fixed partitions.(Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.)a) Top , bottom & side member. |
| 8 | b) Intermediate member. |
| 9 | c) Glazing clip. |
| 10 | Supplying 125 mm. Dia. Acrylic handle for aluminium door as per approved make and brand. (a) natural colour. |
| 11 | Supplying heavy duty hydraulic double action floor spring along with top pin/set of pivots conforming to IS: 6315 or any approved make as per direction of Engineer in charge. |
| 12 | Supplyin heavy duty top pin / set of pivits of local make and approved by the EIC.(This item to be provided where floor spring not used.) |
| 13 | Supplying 4 lever mortice lock or any approved make and brand as per direction of the Engineer- in -charge.I) 150 mm. |
| 14 | Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.a) ' T' shaped EPDM gasket for frames. |
| 15 | b) 'U' shaped EPDM gasket for frames. |
| 16 | c) Weather gasket / Wool pile for door vertical. |
| 17 | Steel body foot-door holder. |
| 18 | Wall panelling / partition with Melamine faced 3 layered flat pressed wood particle board of approved make and brand as per direction of Engineer - in - Charge of requisite grade bonded with phenol formaldehyde synthetic resin conforming to IS: 848 - 1974 (excluding the cost of supporting frame work and teak wood battens / lipping) (1) In any Floor. (A) Plain : Conforming to IS: 3087 - 1985. i) Plain : Exterior grade. a) Interior Grade, 12mm thick. |
| 19 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. xi) 12mm thick clear glass. |
| 20 | i) 4mm thick clear glass. |
| 21 | Supplying labour mazdoor for cleaning and washing the floor and walls with oxalic acid of existing newly occupied office premises, shifting works etc. all complete including supply of all materials |
| 22 | Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections,fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge. |
| 23 | Partly glazed and partly panelled partition or fixed glazing made of extruded and anodised alloy aluminium sections, fabrications after cutting to proper shape and size, drilling and aligning fitted with inbuilt locking arrangement cutting the glass / board (prelaminated / particle / block) to requisite shape and size moulding the edges fitted and fixed glazing clips and dry set neoprine /EPDM gasket, along with all other necessary arrangements for fixing the partition to walls, floors, beams,columns polysulphide sealant for water proofing if necessary complete in all respect as per drawing and specifications and direction of the Engineer in charge. I) For partitions using section of size: a) 63.50 mm x 38.10 mm |
| 24 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. (I) 12mm.thick Ply |
| 25 | (III) 6 mm. thick Ply |
| 26 | Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle/MDF / Ply Boards with recommended / approved adhesive with properclipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof.(i) Thickness of laminate 1.5mm |
| 27 | Taking out existing partition/ceiling of particle board, masonite board, ply board,soft board etc. of any thickness and refixing same in new position with necessary clamps making holes in walls, floor, roof and mending damages if any.[concrete plaster will be paid separately] |
| 28 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. xi) 5mm thick clear glass. |
| 29 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping] (vi) 19mm |
| 30 | ii) Godrej Hydraulic door closer fitted and fixed complete. (b) Medium type |
| 31 | Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed withcadmium plated screws: (iii) 75 x 45 x 2.5mm. |
| 32 | Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge. (a) 200 mm long |
| 33 | Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized(with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In-Charge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing film I) Natural white h) Louvered window. i) Top, bottom and side member. |
| 34 | ii) Louvered Section |
| 35 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn)coating of 150 grams per sq. metre (followed by colourcoated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). In roof .with 0.5mm thick Sheet. |
| 36 | M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. i) For roof truss works a) Span up to 12 Mtr. |
| 37 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 38 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding / staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] With 1:4 cement mortar 10 mm thick plaster. In 2nd.floor upto roof. |
| 39 | Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, oid/Bitumen/M-Seal etc) complete. 110.00 mm dia pipes. |
| 40 | Plain Tee 110mm dia. |
| 41 | Plain Y 110mm dia. |
| 42 | Bend 87.5 degree 110mm dia. |
| 43 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 44 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On steel or other metal surface : With super gloss (hi-gloss) - Two coats (with any shade except white) |
| 45 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, cinolete as per manufacturer's specification and as per direction of E-in-Charge (In ground floor), a) one coat: ii)Solvent based interior grade Acrylic Primer. |
| 46 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty(to be done under specific instruction of Superintending Engineer) :(Two coats) i) Standard Quality |
| 47 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tiles & finishing the joints with white cement mixed with colouring oxide if requiredto match the colour of tiles including roughening of concrete surface,if necessary or by synthetic adhesive & grout materials etc.with sand cement mortar (1:3) 15mm thick & 2mm thick cement slurry at back side of tiles using cement @ 2.91 kg/Sqm & joint filling using white cement [email protected]/Sqm. (I) Area ofeach tile upto 0.09 Sqm coloured decorative. 1 ). In First Floor/ Second Floor |
| 48 | (B) Wall :With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative |
| 49 | Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e)I (I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment.(B) Light Colour |
| 50 | Ordinary cement concrete mix (1:2:4) with graded stone chips(20mm nominal size) excluding shuttering and reinforcement, if any, In Gr. Floor as per relevant IS Codes.Pakur variety.a) In ground floor |
| 51 | Ordinary cement concrete(mix 1:1.5:3) with graded stone chips(20mm.nominal size) excluding shuttering and reinforcement,if any, as per relevant IS-codes Pakur variety. i) Upto the roof of ground floor |
| 52 | Brick work with 1st class bricks in cement mortar (6:1). i) In foundation & plinth. |
| 53 | (a)Supplying,fitting and fixing steel Rolling shutterprofile typewith 18 B.G . of approved type steel latche section 75mm wide, fitted withcoilwire springto necessiatethe fittingofrequiredNos. ofC.I.Pulleyson heavy typesolid drawnseamless steeltube completewith locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.( Measurement will be made on the area of opening covered by the rolling shutter corrected upto 2 decimal.) 2. Payment of painting to be separately. a) In ground floor. |
| 54 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket reducing tee, short piece etc. fitted with holder bats clamps, including, cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (a) For Exposed Work PVC Pipes.(Dia) i) 15mm dia medium quality |
| 55 | i) 20mm dia medium quality |
| 56 | ii) 25mm dia medium quality |
| 57 | ii) 32mm dia medium quality |
| 58 | iii) 40mm dia medium quality |
| 59 | Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal /Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender