Tender For Construction Of Office Building For Sub-Division Hajin.
Tender Value
47.79 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
0 days left
EMD
95580
Bank guarantee accepted
Document Fee
1100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganderbal → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Office Building For Sub-Division Hajin.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 2 | Demolishing tile flooring/wall tiles covering rooms flooring including stacking of serviceable material and disposal of unserviceable material within 50 meters lead |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below |
| 5 | Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: in cement mortar |
| 6 | Earth work in excavation by Mechanical in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 7 | Providing and laying of stone soling hand packed tightly including watering, ramming and all carriages as involved upto site of work complete |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work upto plinth level. M-7.5 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate) 40mm nominal size crushed in foundation and under flooring, all work |
| 9 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering – all works upto plinth level: M-15 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size crushed ) |
| 11 | Brick work with common burnt clay (non modular) bricks class designation 75 in in superstructure above plinth level upto floor five level including curing in 1:4 cement mortar |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) complete. |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for:-Foundation ,footings,bases of columns |
| 14 | suspended floors, beams,lintels |
| 15 | Stairs (excluding landings) except spiral staircases. |
| 16 | Lintel, beams, plinth beams, girders, and cantilevers. |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete using Thermo-Mechanically Treated bars including carriage upto site |
| 18 | Structural steel work welded in built up section for trusses and framed work including soffit and eves cutting hoisting, fixing in position anchor bolts and applying a primer coat of approved steel primer (Str Steel truss along with Purlins, Soffit and Eves sheets, and Square Hollow MS Pipes and other sections as requiredat site) |
| 19 | Providing and fixing color coated Hi Rib 0.50mm sheet roofing fixing with self driven screws of required size including epoxy seal overlapping of sheets complete (up to a pitch of 60 degrees) excluding the cost of purlins rafters and trusses including ridges and valleys |
| 20 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : KD Wood, including primer |
| 21 | 12mm thick Cement Plaster on inner and outer walls 1:4 (1 Cement:4 fine sand) on all surfaces (walls, ceiling and RCC surfaces) complete job |
| 22 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead |
| 23 | 15mm Cement plaster of mix: of mix: 1:4 |
| 24 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 25 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth 1 mm thick complete. |
| 26 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats, over a priming coat |
| 27 | Finishing walls with 100% acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 28 | Providing and fixing 8-10 mm thick decorative plywood panels of approved make and design like (etched /patterned type / Tiled/ khatambandi type) fixed in ceiling , over a framework of treated wooden joists (1.5\\" x 1.5\\" or 2\\" x 1.5\\" as directed) .Work includes cutting and finishing of joints and painting with synthetic enamel paint whereever required, supply & fixing of wooden cornice moulding along ceiling periphery, adhesives, screws, lipping, cleaning, scaffolding, and all incidental charges, complete in all respects as per drawings and directions of the Engineer-in-Charge. |
| 29 | Providing and fixing imported wood work (K.D) in frames of doors, window, clerestory windows and other frames, wrought framed and fixed in position. |
| 30 | Providing and fixing panelled shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, using imported wood (KD) including same kind of wooden panels, as directed, including all accessories a, all complete as per direction of Engineer-in-charge. (32-35 mm th) |
| 31 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. KD (30mm th) |
| 32 | Providing and fixing wire-gauge shutters for windows and ventilators, including GI wire gauge with average aperture of 1.4 mm, fixed with wooden beading and screws, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. (30 mm th) KD |
| 33 | P/F of 3.5 mm thick glass panes, including beading etc, all complete |
| 34 | Removing old/damaged wire-gauge from existing wooden window frames and providing & fixing new GI pre-painted wire-gauge mesh of approved quality, having aperture about 1.4 mm with wire dia 0.36 – 0.50 mm, stretched tight and fixed with screws and wooden or aluminium beading as required, including disposal of unserviceable mesh, supply of new beading, nails/screws, incl. labour, scaffolding and all incidental charges complete as directed by the Engineer-in-Charge. |
| 35 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position including applying priming coat of approved steel primer, and two coats of anti-corrosive paint of approved colour all job complete using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats |
| 37 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer and two coats of anticorrosive colour |
| 38 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 39 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding .grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuls, bolts, fasteners etc.). |
| 40 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 41 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge. With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm) |
| 42 | Providing and Fixing 15 mm thick densified tegular edged eco-friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main ’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on Perimetre wall angle pre-coated steel size (24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws@ 230 mm interval and laying 15 mm thick densified edges calcium silicate ceiling tiles of approved texture (Spin tone / Cosmos/hexa) in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanized steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’ , bottom exposed with 24 mm of all T-sections shallbe prepainted with polyester baked paint, for all heights, as per specifications, |
| 43 | Providing and laying Vitrified tiles in walls with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand and manufacturer, in all colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of tile 600×600 mm |
| 44 | Providing and fixing machine cut, mirror/polished or flamed/roughened (where specified) granite stone slab flooring (16-18 mm th) on treads, risers and landings of RCC stairs, of approved colour and shade, including dressing, cutting to required size, laying over 20 mm thick cement mortar bed of mix 1:4 (1 cement : 4 coarse sand), jointing with neat white/grey cement slurry mixed with matching pigment, including rubbing, curing, finishing, and making edges true, including providing and forming rounded/bull-nosed or chamfered nosing to treads, complete in all respects as per directions of Engineer-in-Charge. The treads may be roughened/flamed and risers polished. |
| 45 | Grouting the joints of flooring tiles/wall tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of tile600x1200 mm |
| 46 | Providing and fixing Ist quality ceramic glazed wall/floor tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 47 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm, including dismantling of 1 No. of old WC Seat |
| 48 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. |
| 49 | Providing and fixing of Plumbing fixtures of Approved Quality (CPWD Approved make only):Bibcock CP Brass Long nose |
| 50 | CP brass basin mixer/wall mixer |
| 51 | angle valve |
| 52 | Towel Rail |
| 53 | Stainless steel Soap Case |
| 54 | 600x450 mm beveled edge mirror of superior glass (of approved quality) |
| 55 | 15 mm dia PPR Pipes incl fittings INTERNAL concealed |
| 56 | 20 mm dia PPR Pipes incl fittings External INLET |
| 57 | 25 mm dia GI Pipes incl fittings, and all earthwork etc EXTERNAL Connections |
| 58 | Union 25 mm GI |
| 59 | 100 mm dia PVC Pipe incl all fittings |
| 60 | 75 mm dia PVC Pipes |
| 61 | Floor Trap |
| 62 | Stainless Steel grating 100 mm dia |
| 63 | Vitreous wash basin with pedestal incl all fittings and connection pipes |
| 64 | Gate valve 25mm BRASS |
| 65 | Ball valve 15-20 mm |
| 66 | soap dispenser |
| 67 | CP brass Ablution health faucet assembly comprising of hand held shower and flexible tube of required dimensions all complete |
| 68 | Providing/fixing Electric Geyzers/Hot water heaters of Approved Quality like Racold, Havels, AO Smith or equivalent make (50 L capacity) |
| 69 | Dry random rubble masonry with hard stone in foundation and plinth with bond stone : Quarry stone |
| 70 | Construction of Main Holes/ Inspection chambers with internal dimensions (2' x 2' x 2') in 9\\" brick masonry 1:6 mix including earthwork in excavation, P/L of stone soling, base concrete 1:4:8 mix, internal plaster 1:3 mix, CC Flooring in 1:2:4 mix, Top slab in 1:1.5:3 mix with MS Manhole cover and frame all complete as directed by EIC |
| 71 | Providing and fixing of Hardware Fittings For Doors & Windows :P&F 40 x 5 mm flat iron hold fast 40 cm long |
| 72 | Providing and fixing bright finished brass handles with screws etc. complete : With a grip length of 75 mm |
| 73 | With a grip length of 125 mm |
| 74 | Heavy Duty Handles for main doors outer side matching with Aldrop |
| 75 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :150 x 10 mm |
| 76 | 100 x 10 mm |
| 77 | P&F Aldrop Locks of approved quality |
| 78 | P&F brass heavy Aldrop Locks of approved quality (Godrej,Milano, Essentra or equivalent make) for main doors |
| 79 | Wind hooks for windows of approved quality |
| 80 | Earth filling including khak bajree mix in layers not exceeding 20 cm in depth, consolidating each deposited layer by rolling with 1/2 tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonne Capacity including loading, unloading all complete including carriage |
| 81 | Cutting and making openings in plywood ceiling (or other false ceiling material) for accommodating existing ceiling light fixtures, ceiling fans, and exhaust points, including marking, cutting, edge finishing, and re-fixing of lights/fans after ceiling installation; providing and fixing additional copper wire (1.5 sq.mm / 2.5 sq.mm) as required for extension from existing junction box to new point, and making all electrical connections complete with insulation tape, screws, saddles, and minor accessories, as directed by Engineer-in-Charge. |
| 82 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in existing surface /or including recessed medium class PVC conduit or pvc trunking on existing walls, with modular switch, modular plate, suitable GI box and earthing the point etc. as required including the panel indicator, fan dimmer whereever required, as per directions of EIC. (including cost of wire) |
| 83 | Wiring for Heating point/Power plug with 2 x 2.5 sq. mm FRLS PVC insulated copper conductor single core cable in existing surface/or including recessed medium class PVC conduit or PVC trunking alongwith earthing wire as required, including Supplying and fixing suitable size GI Box with modular plate and cover in front on surface or in recess, including providing and fixing 5 Pin 15/16 A modular Power plug/socket outlet, and all other accessories as reqd. (including cost of wire) |
| 84 | Providing and fixing 5 Pin 5/6 A modular socket outlet and 5/6 A modular switch, including supplying and fixing suitable size GI Box with modular plate and cover in front on surface or in recess, including including wiring to socket outlet as per directions of EIC (including cost of wire) |
| 85 | Supply and fixing of Following fixtures including all accessories, complete as required : LED Bulb 10/12 watt of approved quality |
| 86 | 1200 mm Ceiling fan of approved quality, including fixing hooks and all accessories |
| 87 | Exhaust fan 250 mm of approved brand(crompton, Havels, Orient or equivalent make) including cut-out in wall, anchor bolts and connections |
| 88 | Carriage of Materials:Cement from avg lead of 1 kms |
| 89 | Steel from avg lead of 10 kms |
| 90 | Sand from avg lead of 15 kms |
| 91 | Stone Aggregates below 40 mm from avg lead of 15 kms |
| 92 | Bricks from Avg lead of 50 kms Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender