Tender For Repair/Maint Of Pump House, Over Head Tank, Under Ground Sump Of Pump House, Centrifugal, Submersible, Mono Block And Starter At Various Place And Replacement Of Water Distrubution Pipe Line And Allied Work At Sector I To Xi At Age Charduar Und
Tender Value
45 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
18 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/Maint Of Pump House, Over Head Tank, Under Ground Sump Of Pump House, Centrifugal, Submersible, Mono Block And Starter At Various Place And Replacement Of Water Distrubution Pipe Line And Allied Work At Sector I To Xi At Age Charduar Under Ge (N) Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | BoQ BOQ Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GARRISON ENGINEER TEZPUR (NORTH) NAME OF WORK : REPAIR/MAINT OF PUMP HOUSE, OVER HEAD TANK, UNDER GROUND SUMP OF PUMP HOUSE, CENTRIFUGAL, SUBMERSIBLE, MONO BLOCK AND STARTER AT VARIOUS PLACE AND REPLACEMENT OF WATER DISTRUBUTION PIPE LINE AND ALLIED WORK AT SECTOR I TO XI AT AGE CHARDUAR UNDER GE (N) TEZPUR Contract No : GE(N)/TEZ/ OF 2026-2027 (8274) Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Description of items of works Item Code / Make Approx No. of quentity required. Units Pre Priced Rate (in. Rs.) as Defined by MES Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures to be entered by the Bidder Rs. P. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT (In INR) TOTAL AMOUNT With Taxes TOTAL AMOUNT (In Words) |
| 2 | Supply and fix in replacement submersible pump motor starter fully automatic star delta operated enclosed in sheet enclosure type for submersible pump motor AC-3 rating 50 HZ 3 phase of capacity 10/ 15 HP complete including making necessary electrical connections all as specified and directed.Note: These starter should be accomodate in existing panel and shall be fixed properly as previous one rating and space. |
| 3 | Supply and fix in replacement submersible pump motor starter fully automatic star delta operated enclosed in sheet enclosure type for submersible pump motor AC-3 rating 50 HZ 3 phase of capacity 20HP complete including making necessary electrical connections all as specified and directed.Note: These starter should be accomodate in existing panel and shall be fixed properly as previous one rating and space |
| 4 | Supply and fix in replacement centrifugal /monoblock pump motor starter fully automatic star delta operated enclosed in sheet enclosure type for submersible pump motor of capacity 10-15 HP, AC-3 rating 50 HZ 3 phase complete all as specified and directed. Note: These starter should be accomodate in existing panel and shall be fixed properly as previous one rating and space |
| 5 | M&L in repairment for construction for water level indicator of existing size made out of MS Sheet of 1.6mm thick complete including painting with super enamelled paint of white colour duly marked the water levels in red colour showing the levels of water inside the overhead tank including aero of existing size painted with red colour and fixed at the height of approx 50 feet testing complete all as specified and directed by Engnr-in-charge. |
| 6 | Cutting & Screwing including fixing of existing GI pipe of 100mm bore in position for taking down or up for addition or alteration or for repair complete all as specified and directed by Engnr-in-charge. |
| 7 | Cutting & Screwing including fixing of existing GI pipe of 80mm bore in position for taking down or up for addition or alteration or for repair complete all as specified and directed by Engnr-in-charge. |
| 8 | S&F 50mm bore of gun-metal, gate valves, with iron wheel head, screwed both ends for GI pipe complete all as specified and directed by Engnr-in-charge. |
| 9 | S&F 40mm bore of gun-metal, gate valves, with iron wheel head, screwed both ends for GI pipe complete all as specified and directed by Engnr-in-charge. |
| 10 | S&F 25mm bore of gun-metal, gate valves, with iron wheel head, screwed both ends for GI pipe complete all as specified and directed by Engnr-in-charge. |
| 11 | S&F in repair/replacement of 150mm bore steel water tubing, galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends, fixed to wall or laid in tranchage including necessary & capacity including breaking the existing brick wall for replacement of corroded GI pipe in/on wall and making good the disturbed surfaces complete all as specified and directed. |
| 12 | S&F in repair/replacement of 100mm bore steel water tubing, galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends, fixed to wall or laid in tranchage including necessary & capacity including breaking the existing brick wall for replacement of corroded GI pipe in/on wall and making good the disturbed surfaces complete all as specified and directed. |
| 13 | S&F in repair/replacement of 80mm bore steel water tubing, galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends, fixed to wall or laid in tranchage including necessary & capacity including breaking the existing brick wall for replacement of corroded GI pipe in/on wall and making good the disturbed surfaces complete all as specified and directed. |
| 14 | S&F in repair/replacement of 50mm bore steel water tubing, galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends, fixed to wall or laid in tranchage including necessary & capacity including breaking the existing brick wall for replacement of corroded GI pipe in/on wall and making good the disturbed surfaces complete all as specified and directed. |
| 15 | S&F in repair/replacement of 40mm bore steel water tubing, galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends, fixed to wall or laid in tranchage including necessary & capacity including breaking the existing brick wall for replacement of corroded GI pipe in/on wall and making good the disturbed surfaces complete all as specified and directed. |
| 16 | S&F in repair/replacement of 25mm bore steel water tubing, galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends, fixed to wall or laid in tranchage including necessary & capacity including breaking the existing brick wall for replacement of corroded GI pipe in/on wall and making good the disturbed surfaces complete all as specified and directed. |
| 17 | S&F in repair/replacement MS flange heavy duty complete with nuts bolts and washers 06 nos suitable for 150 mm dia GI pipe complete all as specified and directed. |
| 18 | S&F in repair/replacement MS flange heavy duty complete with nuts bolts and washers 06 nos suitable for 100 mm dia GI pipe complete all as specified and directed. |
| 19 | S&F in repair/replacement MS flange heavy duty complete with nuts bolts and washers 06 nos suitable for 80 mm dia GI pipe complete all as specified and directed. |
| 20 | M&L in replacement valve chamber cover with frame and locking arrangement made out of angle iron or other section and MS sheet with welding of holdfast etc. including hinges fabricated MS is not less than the thickness of frame all as specified including preparation of surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed. |
| 21 | Material and labour for construction of brick masonry valve pit of size 60 cm x 60 cm x 60 cm (internal dimensions) with one brick thick wall in cement mortar (1:4) on 100 mm thick PCC (1:4:8) type D2 (using 40 mm graded aggregate) as in foundation, 15 mm thick rendering in cement mortar (1:4) internally and externally up to 15 cm below ground level including, provision of valve pit cover made out of 3 mm thick MS sheet welded with 40 x 5 mm thick flat iron all round, on ISA 40 x 40 x 6 mm frame, fixed with hold fast 150 mm long, embedded in PCC (1:2:4) type B1 (Block size 230 x 200 x 100 mm) with necessary hinges, handles, locking arrangement, including applying two coats of white wash on plastered surfaces and two coats of bituminious paint over a coat of red oxide primer on steel surfaces and ncessary earth work in soft/loose soil complete all as specified and directed. |
| 22 | Material and labour for construction of brick masonry valve pit of size 90 cm x 90 cm x 90 cm (internal dimensions) with one brick thick wall in cement mortar (1:4) on 100 mm thick PCC (1:4:8) type D2 (using 40 mm graded aggregate) as in foundation, 15 mm thick rendering in cement mortar (1:4) internally and externally up to 15 cm below ground level including, provision of valve pit cover made out of 3 mm thick MS sheet welded with 40 x 5 mm thick flat iron all round, on ISA 40 x 40 x 6 mm frame, fixed with hold fast 150 mm long, embedded in PCC (1:2:4) type B1 (Block size 230 x 200 x 100 mm) with necessary hinges, handles, locking arrangement, including applying two coats of white wash on plastered surfaces and two coats of bituminious paint over a coat of red oxide primer on steel surfaces and ncessary earth work in soft/loose soil complete all as specified and directed. |
| 23 | Supply and fix in replacement of submersible copper cable of size 16 sq mm 3 core (with construction 126/0.4), 1100V grade cable with 99.97% pure ETP grade copper with uniform double insulated, complete all as specified and directed. |
| 24 | Supply and fixing in repair hand operated flangeless butterfly valve of size 150 mm dia, class-1, conforming to type PN 1.6 of IS:13095 -1991 of pressure not less than 15 Kg / Sqcm complete with flanges, bolts, nuts, gasket etc as per specifications complete in all respect all as specified. |
| 25 | Supply and fixing in repair hand operated flangeless butterfly valve of size 100 mm dia, class-1, conforming to type PN 1.6 of IS:13095 -1991 of pressure not less than 15 Kg / Sqcm complete with flanges, bolts, nuts, gasket etc as per specifications complete in all respect all as specified. |
| 26 | Supply and fixing in repair hand operated flangeless butterfly valve of size 80 mm dia, class-1, conforming to type PN 1.6 of IS:13095 -1991 of pressure not less than 15 Kg / Sqcm complete with flanges, bolts, nuts, gasket etc as per specifications complete in all respect all as specified. |
| 27 | Supply and fixing sluice valve 150 mm bore, ISI marked, Conf to IS 14878 , with valid CMLNo. , Batch No. and Manufacturer Serial No., class PN 1.0 with brass spindle, brass check nut, with fiber board gasket, bolts, nuts and washers for fixing the valve in position, in valve pit chambers or location complete all as specified and directed. |
| 28 | Supply and fixing sluice valve 100 mm bore, ISI marked, Conf to IS 14878 , with valid CMLNo. , Batch No. and Manufacturer Serial No., class PN 1.0 with brass spindle, brass check nut, with fiber board gasket, bolts, nuts and washers for fixing the valve in position, in valve pit chambers or location complete all as specified and directed. |
| 29 | M&L for repairing of chemical dosing pump simple diaphragm type coupled with 0.5 HP 440 Volts AC 1440 RPM motors suitable for from 100 ltrs capacity dosing tank of any specification and making dosing pump , strainer and siphon valve and pressure filt valve etc functional complete all specified and directed by Engr-in-Charghe at site.Note : Rates for PVC wire wooven (re-inforced) heavy duty flexible pipe from chemical dozing pump to venturi , along with ferrul and non return valve,repair to pump and motor etc is deemed to be inclcuded in the quoted rates. |
| 30 | M&L for taking out of defective booster pump/centrifugal pump 10-15 HP and taking out burnt out windings,cleaning of motor rotor and stator with cleaning material. Rewinding of motor with super enamelled copper wire of existing gauge including replacement of unserviceable parts including transportation. Assembling of motor and testing complete to the satisfaction of Engineer-in -Charge. Note: all cost for repair/replacement part of accesories for the motor/pump deemed to included in quoted rate no separate cost will be provided. |
| 31 | M&L for taking out of defective submersible pump set of any discharge capacity from borewell including tripod arrengement for dismantling/taking out column pipe of any size/length alongwith submersible cable,nuts,bolts etc and lowering down the pump set alongwith coloumn pipe after carrying out necessary repairs/replacement of defective parts including replacement of old gaskets and testing on completion all as specified and directed. |
| 32 | Strip opening of submersible motor 10-25 HP and taking out burnt windings,cleaning of motor rotor and stator with cleaning material,carrying out necessary machining work such as grinding, metaling and polishing and rewinding of motor with stove enamelled copper wire of existing gauge,replacement of unserviceable parts as required. Assembling of motor and testing complete upto entire satisfaction of Engineer-in -Charge. Note :- Spare required shall be measured and paid separately under respective item here in after |
| 33 | Supply only Motor bush upper and lower for submersible motor of capacity 10 to 25 Hp suitable for existing make & model\ complete upto entire satisfaction of Engineer-in -Charge. |
| 34 | Supply only Rotor bearing sleeve upper and lower for submersible motor of capacity 10 to 25 Hp suitable for existing make & model complete upto entire satisfaction of Engineer-in -Charge. |
| 35 | Supply only Sand guard for submersible motor of capacity 10 to 25 Hp suitable for existing make & model complete upto entire satisfaction of Engineer-in -Charge. |
| 36 | Supply only Motor thrust plate assy for submersible motor of capacity 10 to 25 Hp suitable for existing make & model complete upto entire satisfaction of Engineer-in -Charge. |
| 37 | Supply only Motor coupler sleeve with key for submersible motor of capacity 10 to 25 Hp suitable for existing make & model complete upto entire satisfaction of Engineer-in -Charge. |
| 38 | M & L for taking out of submersible pump of capacity 02-05 HP of any make from borewell and repair/replacement of rewinding of motor with super enamelled copper wire of existing gauge including replacement of unserviceable parts incl transportation.Assembling of motor and testing complete to satisfaction of Eng-in-charge.Note: All cost for repair/replacement part of accessories for the motor/pump deemed to included in quoted rate no separate cost will be provided |
| 39 | M&L for development existing of bore well of depth upto 120 mtrs for 12-24 hours with air compressor machine at desired air pressure till clear sand free potable water is obtained from the bore well completion of developemnt work and testing for required yeild of ground water all as directed by Engr-in-Charge at site. Note: The aircompressor if required beyond the 12 hours for proper yield of water from borewell then it should be deemed in quoated rate by the contractor. |
| 40 | M&L for taking out and down after repair of submersible pump motor, cable and column pipe of any Capacity and re-lowering the pump set alongwith existing column pipes, submersible cable of any make/size including replacement as per requirement for nuts bolts & washers of suitable size/length including making all electrical connectios after completion of developemnt work and testing for required yeild of ground water all as directed by Engr-in-Charge at site. Note: Moter and column pipe and cable measurement and paid seperately. |
| 41 | Excavation in trenches not exceeding 1.5 metre wide and and not exceeding 1.5 metre in depth for laying pipes/cable and getting out in soft/loose soil complete all as specified and as directed. |
| 42 | Returning, filling in and including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/ losse soil complete all as specified and as directed. |
| 43 | Removing excavated materials to a distance exceeding 50 metre but not exceeding 50 m and dipositing where directed at a level not exceeding 1.5 m above the starting point in soft / loose soil complete all as specified and as directed. |
| 44 | M&L for repairs/rectification of leakage in UG cast iron /Galvanised iron/DI pipe by means of choking lead wool/ pig lead or tightening of GI fittings complete including excavation and earth work for exposing the joints and working space on the site, returning, filling in and making good to the existing earth level of the surroundings after repair for size 100/110 mm bore complete all as specified and as directed.Note;- (i) Rectification of leakage shall be attended and rectified by the contractor on the same day of reporting by the Engr-in-charge. Non rectification of leakage of pipe line shall be viewed as serious lapse on contractor's part and penal charges as Rs 100/- per complaint (ii) Supply only Lead wool/pig lead shall be measured and paid seperately. (iii) In case excavation beyound 1 mtr from both side of the joint is required the same shall be measured and paid separately under respective item. |
| 45 | Complete all as per Item No 43 here-in-before but for size 80/90 mm bore complete all as specified and as directed. |
| 46 | Complete all as per Item No 43 here-in-before but for size 50/63/40/32 mm bore complete all as specified and as directed. |
| 47 | Complete all as per Item No 43 here-in-before but for size 25 mm bore complete all as specified and as directed. |
| 48 | Supply only pig lead for rectification of leakage of joints of CI/DI pipe complete all as specified and as directed. |
| 49 | S& F for cutting of CI/DI pipe150/ 100 mm dia carefullyfor new connection of distribution in position inserting fittings such as bend, tee, socket pieces, collar etc; complete all as specified and as directed.Note: necessary fitting for insertion of hole in DI pipe is incld in the above item no extra cost will be paid complete all as specified and as directed. |
| 50 | M & L for attending complaints pertaining to external water supply system from concern JE at AGE Charduar office for various areas under AGE Charduar in writting during the hours as fixed by the Engr-in-Charge and detecting faults in distribution system/delivary or rising main system of any size or bore and any type/size of pipes laid in trenches/with wall/on floor/ to overhead tanks of any capacity/size at any height in any area under AGE Charduar and rectify the fault to restore the water supply services in all respect and upto entire satisfaction of Engr-in-Charge and comprising of the followings:-(i) Person collecting the complaints/deputed by the contractor shall have sound knowledge of repairing/maintenance of CI/DI/PPR pipes and he will visit the site to assess the actual requirement/nature of fault in water supply system and also shall repair minor repairs to PP-R pipelines/CI/DI/GI pipe lines of any dia sponteneously.(ii) If any complaint left unattended by the the contractor ,penalty @ Rs 1000/- per complaint per day be imposed on contractor. (iii) Contractor shall be resposible to communicate the concern JE/AGE E/M regarding any major breakdown/fault within 30 minutes if the problem is of specific nature.(iv) Contractor shall be resposible for providing suitable transport to person deputed by him and shall be bound to reach at site within 30 minutes after receiving the complaint. (v) Necessary T&P required to repairs all defects/faults shall be provided by the contractor and cost shall be deemed included in unit rate quoted by the contractor.(vi) Requirement of specific spares/stores such as CI/DI/PPR pipes and their respective fittings, sluice/gate and spares of water supply plants/equipments,excavation/earth work if required will be given by the contractor well in advance to Engr-in-charge/JE E/M. |
| 51 | Supply and fix in replacement of submersible copper cable of size 10 sq mm 3 core (with construction 80/0.4), 1100V grade cable with 99.97% pure ETP grade copper with uniform double insulated, complete all as specified and directed. |
| 52 | Supply and lay Pipes ERW Steel including specials, nominal dia 80 mm as per IS 3589 (1981) thickness 6.0 mm both end flanged 3.0 mtr long fitted with flanges at both ends made out of heavy grade pipes of not less than 6mm wall thickness ISI marked IS:3589-1981 complete with bolts, nuts, gasket etc as required at site complete all as specified and directed. |
| 53 | Supply and fix 150 mm bore CI Non Return Valve (reflux valve), PN 10, complete with fixing arrangement by providing gasket, flanged end, nut, bolts and washers etc complete all as specified and directed. |
| 54 | S&F in replacement of surface type pressure booster pumps of 1.5 HP,Single Phase,220 V,50 Hz ,2700 rpm speed of Size 25mm x 25mm,minimum head of 12mtr and minimum discharge of 20 LPM including pressure tank complete with thermal overload protection and suited for consistent pressure at multiple outlets all as per category complete all as specified and directed by Engnr-in-charge. |
| 55 | Supply & filling of non ferric alum grade-I in sealed packing commercial for dosing/filling in drinking water as per standard parameters as specified and rate of dosing as per standard parameters complete all as specified and directed by Engnr-in-charge. |
| 56 | Supply only Calcium hypochlorite granular form with chlorine content of 65% to 70% in sealed packing for pre chlorination and post chlorination for dosing/filling in drinking water as per following generic specification complete all as specified and as directed.(a) Available Chlorine min - 65% by mass(b) Particle size (passing through 1.70 mm IS sieve) min - 99 % by mass(c) Water insoluble matter max - 6%(d) Calcium Hydroxide max - 4%(e) Sodium Chloride max - 15%(f) Loss of chloride on basis of available chloride max - 1/15 Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender