Tender For Certain B/R Repairs To Various E/M Installation, View Cutter And Other Misc B/R Works At Vsn Under Ge(Af) Chiloda.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
15 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Certain B/R Repairs To Various E/M Installation, View Cutter And Other Misc B/R Works At Vsn Under Ge(Af) Chiloda.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling Plain or corrugated steel/ Fibre translucent sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings ,complete all as specified |
| 2 | M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws,complete all as specified |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws ,complete all as specified |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for,complete all as specified |
| 5 | S&F for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, Fe 410-W (Gde-E-250) quality-A,etc ,complete all as specified |
| 6 | S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A ,complete all as specified |
| 7 | S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm and not exceeding 10cm long and dia of neck 11 to 15mm, complete all as specified |
| 8 | S & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 Gde-E-165 ,complete all as specified |
| 9 | S&F for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wire mesh etc), wind ties etc including all necessary welding, drilling etc and similar works confirming to Fe-290 grade E-165 ,complete all as specified |
| 10 | Dismantling expanded metal/weld mesh , any thickness or mesh, fixed with steel or wood fillets, if any n exc 4 kg per sqm,complete all as specified |
| 11 | S & F Welded steel wire fabric n exc 4 kg per sqm supplied and fixed complete to wood or steel members ,complete all as specified |
| 12 | M&L PCC 1:3:6 type C2 using 40mm graded stone agg as in foundations, filling and mass-concrete,complete all as specified |
| 13 | Dismantling fencing wire mesh any type,complete all as specified |
| 14 | Supply only chain link MS Galvanised fencing any size are ,complete all as specified |
| 15 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire ,complete all as specified |
| 16 | S&F only mild steel flat iron, round bars etc. in available length complete conforming to Fe-290 (Gde E-165) ,complete all as specified |
| 17 | S&F in repair for Steel rolling shutters 1.25mm thick, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete Push or pull manual type including ball bearing and Safety lever locks mild steel with 4 levers for rolling shutters ,complete all as specified |
| 18 | M&L for repair and reoperating old rolling shutter of size not exceeding 10 sqm by oiling and greasing and required small all fittings and fixtures of shutter including necessary welding , channel rails, guard cover etc,complete all as specified |
| 19 | M & L for preparation of newly steel surfaces of any description, over 10cm in width or girth,not otherwise described two coats of synthetic enamel paint over one coat of red oxide, zinc chrome primer,complete all as specified |
| 20 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width and grith and applying one coat of synthetic enamel paint ,complete all as specified |
| 21 | M&L for preparation of old painted concrete surfaces of wall/kerb stone and similar works of any desctription over 10 cm width/girth not otherwise described and applying two coat of synthetic enamel paint complete all as specified and as directed |
| 22 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and as directed. |
| 23 | M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified. |
| 24 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc,complete all as specified |
| 25 | M&L rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces at any height including Chajjas, balcony and parapet, finished even and smooth without using extra cement ,complete all as specified |
| 26 | M&L rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement ,complete all as specified |
| 27 | M&L for applying Two coats of 100% Premium acrylic Emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces.,complete all as specified |
| 28 | M&L for applying one coat of Exterior Emulsion paint on old undecorated surfaces of wall of required shade including preparation of surfaces,complete all as specified |
| 29 | M&L for applying one coat of white wash on old undecorated surfaces of wall including preparation of surfaces. |
| 30 | M&L for applying one coat of white wash on old undecorated surfaces of ceiling including preparation of surfaces. |
| 31 | M&L for preparation of new plaster surfaces and applying two coats of distemper oil emulsion over a priming coat complete all as spd and directed. |
| 32 | Dismantling of roof terracing cement concrete (un-reinforced) and existing water proofing treatment of any thickness in any position and of any portion from top of roof of building, cleaning surface of roof with wire brush / mechanical brush and with water thoroughly to remove all dust / dirt and loose particles to expose base concrete roof slab and removal of rubbish / demolished material out of MD land complete all as specified. |
| 33 | M&L for 40 mm thick padding in roof, chhaja and similar work in PCC 1:2:4 type B0 (using 12.5mm graded aggr) with WPC @ 3% by wt , making haunching if required and surface even and smooth with using extra cement including demolition all as specified and directed |
| 34 | Material and labour for 10mm thick cement paster in CM 1:3 mixed with WPC @ 2% by weight of cement finished even and fair withour using extra cement on roof surface and wall (WPC will be measured and paid seperately as supply only rate) |
| 35 | Supply only integral water proofing compound of approved make complete all as specified and as directed. |
| 36 | Material & labour for cleaning of concrete or plastered surfaces of roof and applying priming coat with and using bituminous primer @ 0.30 KG per Sqm followed evenly by a tack coat @ 1.20 KG per Sqm using 85 / 25 grade industrial hot blown bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane minimum weight 3 Kg per Sqm reinforced with non-woven polyester fabric (weight not less than 150 Gm per Sqm) unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using 85/25 grade industrial hot blown bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.20 kg per Sqm as per manufacturer’s instructions, complete all as specified & directed. |
| 37 | Dismentling of stone slabs and tiles laid bedded and pointed in any mortar of any description including removal of sand cushioning under paver block, complete all as specified and directed. |
| 38 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment including 15 mm thick cement screed bed in CM 1:6 complete to match the shade of the slab including rubbing and polishing complete |
| 39 | Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and as directed. |
| 40 | M & L for Cement concrete 1:4:8 type D2 (40mm graded aggregate) in sub base of hardstanding/ paver block/ checked tile/ stone slabe complete all as specified. |
| 41 | M & L for 100 mm thick cement concrete 1:2:4 type B-1 (20 mm graded aggregate) as in floor all as specified and directed. |
| 42 | M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed . |
| 43 | M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; complete all as specified |
| 44 | Refixing for Machine pressed precast concrete interlocking paver block and shape and size confirming to IS 15658-2006 of 60/ 80 mm thickness M-35 grade including leveing and spreading of sand cusion as laying in floor etc complete all as specified |
| 45 | M&L for sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified |
| 46 | M&L cement 1:3:6, type C1, using 20 mm aggregate providing, cement concrete in edges of path, rounded or chamfered on edges etc complete all as specified |
| 47 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified |
| 48 | M & L for preparation of new or previously untreated plaster/ concrete/Stone surface of any description over 10cm girth or width, not otherwise described & applying applying two coats of synthetic enamel paint over a coat primer, complete all as specified |
| 49 | M & L for preparation of old painted plaster/ concrete/Stone surface of any description over 10 cm width or girth & applying applying one coat of synthetic enamel paint, complete all as specified |
| 50 | Taking down Chowkats or frames n exc. 1.50 sqm each, with shutters (without taking off shutters from the frame) and to store ,complete all as specified |
| 51 | Taking down Chowkats or frames exc 1.50 sqm but not exc. 4 Sqm each, with shutters (without taking off shutters from the frame) and to store |
| 52 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. all as specified and directed. |
| 53 | S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube all as specified. |
| 54 | Taking down shutters of any description exc. 1.00 sq. m and n. exc. 2.00 sqm each all as specified and directed. |
| 55 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 56 | S & F in repairs Health faucets ,hand shower stand / hook only brass cromium plated including screw for fixing on wall etc complete. |
| 57 | S&F in repairs Vitreous China squatting pan of pattern `long pan', size 580mm white with `p' or `S' trap, front or back inlet & foot rests, any pattern (exclusing flushing cistern & flush pipe) all as specified and directed.Make: CERA S3010109 or equivalent of Parryware/Hindware |
| 58 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white with seat cover (excluding flushing cistern and flush pipe)Make:- CERA S1053121 or equivalent of Parryware/Hindware |
| 59 | S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets all as specified. Make:- Cera B1010113 or equivalent of Parryware/Hindware |
| 60 | Dismantling water tanks exc 200 but n.exc 500 Litres capacity ,complete all as specified |
| 61 | Dismantling water tanks exc 500 but n.exc 1000 Litres capacity,complete all as specified |
| 62 | S & F 500 Liters capacity Triple layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including fixing only ball valves complete. |
| 63 | S & F 1000 Liters capacity triple layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including fixing only ball valves complete. |
| 64 | S&F in repair 20 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed ,complete all as specified |
| 65 | S&F in repairs 15 mm size bib tap with wall flange and aerator cast copper alloy, chromioum plated fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and as directed.Make CERA F 2008151 or equivalent of Parryware/Hindware |
| 66 | S&F in repairs 15 mm size pillar tap with wall flange and aerator cast copper alloy, chromioum plated fancy type screwed down, with capston head, screwed for iron pipe complete all as specified and as directed.Make CERA QT F2008103 or equivalent of Parryware/Hindware |
| 67 | S&F in repairs 15 mm size stop valve or angle valve cast copper alloy, chromioum plated fancy type, screwed down, high pressure with capston head, screwed both ends for iron pipe or for union all as complete all as specified |
| 68 | S & F in repair grating doom 150 x 150 mm of brass chromium plated, complete all as specified |
| 69 | S & F in repair PVC connection 15 mm size with PTMT nuts on both end, length 600 mm complete all as specified |
| 70 | S&F in repair vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces complete all as specifiedMake: Cera: S2040103 or equivalent of Parryware/Hindware |
| 71 | S&F in repair polyethylene water tank cover with hinges suitable up to 2000 Ltrs tanks all as specified and as directed. |
| 72 | S&F in repairs 32 mm size waste pipe for wash hand basin / urinal / sink complete. |
| 73 | S & F in repairs hand shower (Health Faucet) brass chromium plated with 8 mm Dia & 1 meter long flexible tube and wall hook complete.Make:- CERA F 8030105 AB or equivalent of Parryware/Hindware |
| 74 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 75 | M & L for glazed ceramic colour tiles in vertical surfaces 300x 200x 7mm/ 300X 450X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including backing coat of 10mm thick in CM (1:4) all as specified and directed. |
| 76 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 SQM but not exceeding 0.11 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 20mm thick in CM (1:6) all as specified and directed.. |
| 77 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.16 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 20mm thick in CM (1:6) complete all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender