Tender For Repair To Damage Reinforced Cement Concrete Structural Member, External And Internal Plaster Work, Floor/Wall Tiling And Other Misc Work In Mes Installation Under Age B/R-I (Nw) Navy Nagar Of Ge (Nw) Navy Nagar, Colaba, Mumbai
Tender Value
48 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
0 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Damage Reinforced Cement Concrete Structural Member, External And Internal Plaster Work, Floor/Wall Tiling And Other Misc Work In Mes Installation Under Age B/R-I (Nw) Navy Nagar Of Ge (Nw) Navy Nagar, Colaba, Mumbai
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including disposal of debris out side the MoD land etc complete as directed by Engr-in-charge. |
| 2 | Material & Labour Brick work with sub class 'B' brick straight or curved on plan exc 6 mtr mean raddius built in CM (1:6) complete all as specified and directed by Engg-In- Charge. |
| 3 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings or chajjas (FRP or any other pattern) complete all as specified and directed |
| 4 | Material & Labour pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engg-In- Charge. |
| 5 | Cutting chases, pinning in and making good to facings of brick/concrete/stone walling where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed by Engg-In- Charge. |
| 6 | M&L for filleting in any position and to any shape of section area exc 25 sq cm but n.exc 50 Sq cm in cement sand mortar 1:3 by complete all as specified and as directed by Engg-In- Charge. |
| 7 | Supply and fixing 10 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc complete all as specified and directed by Engg-In- Charge. |
| 8 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 9 | Supply and fixing PVC (SWR) 110mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and rain water bracket suitable for 110mm pipe spacing 1.5m C/C as per CE (Navy) Mumbai TD No TD/2023/01 . complete all as specified and directed by Engineer-In-charge. |
| 10 | Supply and fixing PVC HDPE 40mm bore pipes in any length with including elbows,bends etc fixed to wall with fastners at suitable spacing complete all as specified and directed by Engineer-In-charge. |
| 11 | Supply and fixing 110mm PVC (SWR) bends complete all as specified and as directed by Engg-In- Charge. |
| 12 | Supply and fixing PVC (SWR) branch piece, Single (single Y) equal or unequal for 110 mm bore access door eye. complete all as specified and directed by Engg-In- Charge. |
| 13 | Supply and fixing 110mm bore PVC floor trap with SS gratings incl jointing to waste pipe with solvent cement complete all as specified and directed by Engg-In- Charge. |
| 14 | Demolition of cement concrete un-reinforced of any description and at any position including disposal of debris out side the MoD land etc complete as directed by Engr-in-charge. |
| 15 | M&L PCC Type B1 1:2:4 (20mm graded agg) as in coping to manholes including weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed by Engg-In- Charge. |
| 16 | Material & Labour for 75mm thick PCC (1:3:6 ) type C-2 using 40 mm graded stone aggregate as in plinth protection laid in panels and in base course for pavers blocks etc complete all as specified and directed by Engg-In- Charge. |
| 17 | Material & Labour for cement concrete 1:4:8 type D2 using 40mm graded aggregate and filling mass concrete in foundation complete all as specified and directed by Engg-In- Charge. |
| 18 | M&L for Machine pressed precast coloured glazed concrete interlocking paver block with grey cement & pigment, glossy finish (reflective type) any shape and size (as approved by GE) confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, as in pavements to required level & gradients, set, jointed with clean dry sand and sealing the ends using PCC 1:2:4 etc complete. Note : sand shall be measured and paid seperatly. |
| 19 | M&L for Sand filling under floors or in foundation including watering and consolidation etc complete. |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engg-In- Charge. |
| 21 | M & L Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and directed. |
| 22 | S&F rolled mild steel section (angle or tubualr type) as in main and cross beam, hip and jack rafters, purlins where connected to common rafter and running rails etc complete conforming to Fe-290 (GdeE165) quality B including working platform/scaffolding) Complete all as specified and as directed by Engr-in-Charge. |
| 23 | M&L MS plate plain/ Chequered of required thicknes over as in manhole cover fixed to angle iron frame with three No of hinges and 150mm handle. complete all as specified. |
| 24 | Preparaing of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engg-In- Charge. |
| 25 | Preparaing of old steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and as directed by Engg-In- Charge. |
| 26 | S&F in repairs powder coated aluminium anodised frame/shutters for door, windows, ventilators etc.with one or more rebates including joining cleat for fixing etc.fixed type/ louvered window or ventilator without sash bar,aluminium including necessary joining cleats,glazing clips,rubber packing,anodised aluminium snap beading,screws, sliding rollers, Rubber gasket etc.compleate all as specified compleate all as specified.Note: Glazing shall be measured seperately. |
| 27 | Material and labour aluminium anodised grill with suitable aluminium anodised frame section manufactured by M/S Deco grill pattern DG-102 (7.5mm dia and aparture 50mm) complete all as specified and directed by Engr-in-Charge. |
| 28 | Supply and fixing 4 mm thick plain glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and directed by Engg-In- Charge. |
| 29 | Material & Labour Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples or wooden/ Aluminium beadding complete all as specified and directed by Engg-In- Charge. |
| 30 | Taking down chowkats or frame (w/o taking off shutters from the frames) n.exc 1.50 Sqm each complete all as specified and directed by Engg-In- Charge. |
| 31 | Taking down chowkats or frame (w/o taking off shutters from the frames) exc 1.50 Sqm each but nexc 4 sqm each complete all as specified and directed by Engg-In- Charge. |
| 32 | Supply and fixing MS holdfast, wall ties and similar articles confirming to Fe-290 Gde- E-165 complete all as specified and directed by Engg-In- Charge. |
| 33 | M&L for PCC (1:3:6) type C-1 (20mm graded agg) for fixing of hold fast complete all as specified and directed by Engg-In- Charge. |
| 34 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 35 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges shall be paid separately. |
| 36 | Supply and fixing 100mm size SS butt hinges fixed with SS screws complete all as specified and as directed by Engg-In- Charge. |
| 37 | Supply and fixing 150 mm long aluminium anodised barrel tower bolts of extruded section fixed with SS screws complete all as specified and as directed by Engg-In- Charge. |
| 38 | Supply and fixing 150mm size extruded aluminium alloy handles, fabricated type anodised fixed with SS screws complete all as specified and directed by Engg-In- Charge. |
| 39 | Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 300 mm fixed with SS screws complete all as specified and directed by Engg-In- Charge |
| 40 | Supply and fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed of length 200 mm fixed with SS screws complete all as specified and directed by Engg-In- Charge |
| 41 | Material & Labour for preparing old wood or wooden surfaces over 10 cm of width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engg-In- Charge. |
| 42 | Taking down cement or cement lime plaster on brick or stone walls, any description, including raking out joints, hacking for key, scrubbing down with water, etc including disposal of debris out side the MoD land etc complete as directed by Engr-in-charge. |
| 43 | Providing and applying 20mm thick plaster with readymix prepacked proportioned dry mix mortar, blended mixed with liquid water proofing compound on fair faces of brick wall or concrete surfaces by means of gunniting method, on external surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge. |
| 44 | Providing and applying fair finish 15mm thick plaster with readymix prepacked proportioned dry mix mortar on other than fair faces of brick wall or concrete surfaces additives, on internal surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge. |
| 45 | Providing and applying fair finish 10mm thick plaster with readymix prepacked proportioned dry mix mortar on ceiling including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge. |
| 46 | M&L for Prepration of new plastered surfaces of walls and applying two coat oil bound distemper and a coat of primer including prepration of surface complete all as specified and direceted. |
| 47 | M&L for preparing old plastered surfaces and applying two coats oil bound distemper on walls complete all as specified and direceted. |
| 48 | Material & Labour for preparing new plastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engg-In- Charge. |
| 49 | Material & Labour for applying two coats of white wash on old decorated ceiling incl complete removal of existing treatment complete all as specified and directed by Engg-In-Charge. |
| 50 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth. |
| 51 | Material & Labour for preparing old surfaces plastered or unplastered on walls incl complete removal of existing treatment complete all as specified and directed by Engg-In-Charge. |
| 52 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over wall surfaces |
| 53 | Material & Labour for chipping, removing carefully concrete work by low impact hammer, breaker without damaging the structure and cleaning and disposal of debris out side the MoD land etc complete as directed by Engr-in-charge. Hard concrete should not be removed by force complete all as specified and directed |
| 54 | Mixing and applying premix SBR latex polymer modified cement mortar 30 mm thick as approved, including trowelling with wooden tools on prepared concrete surfaces of parent material complete all as specified and as directed (Note : Rate includes the rate of steel scaffoldings. No separate payment will be paid for scaffoldings). |
| 55 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposal of debris out side the MoD land etc complete all as specified and directed by Engg-In- Charge. |
| 56 | M&L Non - skid coloured ceramic tiles 7 to 8 mm thick of size area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including bedding layer of 20mm thick using cement mortar C:M :: 1:4 for laying floor finishes complete all as specified and directed by Engr-in-Charge. |
| 57 | Material & Labour for coloured glazed ceramic tiles in vertical surface 300x450x6 to 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick plaster using cement mortar C:M :: 1:4 complete all as specified and directed by Engr-in-Charge. |
| 58 | Material and labour coloured glazed vitrified tiles 7 to 8 mm thick (square / rectangular) area of each tile 600mmx600mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including bedding layer of 20mm thick using cement mortar C:M :: 1:4 for laying floor finishes complete all as specified and directed by Engr-in-Charge. |
| 59 | M&L Matt finish Vitrified (Heavy Duty industrial) tiles of size 300mmx300mmx10-12mm thick in floors or skirting over and including 15mm thick screed bed in cement mortar (1:6) and jointed in neat cement slurry and pointed in white cement mixed with desire colour complete all as specified and as directed by Engineer-In-charge. |
| 60 | Demoliton of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beded and pointed in any mortar |
| 61 | M&L machine cut pre-polished kota stone slab flooring 20-25mm thick over and including 15 mm thick cement screed base (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed) |
| 62 | M&L machine cut pre-polished kota stone slab 20-22 mm thick in riser of steps, skirting, dado and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete (Note : The rate includes the cost of cement screed bed ) |
| 63 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in floor, steps, jambs, pillars, window-cills, cooking platforms an laid in 10mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 64 | Rounding to edges of stone slabs (kota/granite/marble etc) one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engg-In- Charge. |
| 65 | M&L coloured glazed cement concrete chequered tiles 300 x 300 x 25 mm thick, machine pressed , glossy finish (reflective type), any design (as approved by GE); set jointed and pointed in neat cement slurry over and including 20 mm thick cement screed in cm 1:6 complete (Note : Cost for 20 mm thick cement screed is inclusive in the rate.) |
| 66 | S & F in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' or 'S' trap including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover including connecting to trap and flushing pipe, anti-syphonage pipe etc and screwed with ms screws to complete all as specified and directed by Engineer-in-Charge. |
| 67 | S&F for chromium plated brass telephonic health faucet shower with flexible tube of stainless steel, 1.00 Mtr long with CP holder, multi flow 15mm dia for iron pipe or for brass ferrule etc. complete all as specified and as directed. |
| 68 | S & F in Repairs lever operated 15 mm dia of 2-in-One chromium plated brass Bib taps, with crutch handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. |
| 69 | S&F in repair of 15 mm dia bore chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified |
| 70 | Material & Labour 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets in repairs complete all as specified and as directed by Engg-In- Charge. |
| 71 | Supply and fixing in repairs Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding water taps waste chain plugs and porcelian stopper but including brackets complete all as specified and as directed by Engg-In- Charge. |
| 72 | Supply and fixing in repair CP brass swan neck type pillar tap of 15mm dia, screwed down high pressure fancy type 250mm long complete all as specified and directed by Engg-In- Charge |
| 73 | Material & Labour in repair 32 mm dia waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) including waste pipe complete all as specified and directed by Engg-In- Charge |
| 74 | Supply and fixing PVC connectors of 15 mm size with PTMT nuts of length 600 mm length complete all as specified and directed by Engg-In- Charge |
| 75 | S&F in repair 1mm thick of laths Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle complete all as specified and directed |
| 76 | Dismantling aluminium/ Gypsum, PVC sheet partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer in-charge. |
| 77 | S&F of 4 mm thick non asbestos cement building boards of approved texture of size 595 x 595 mm size to be placed incl GI snap grid frame work for false ceiling comprising of the following sections for making partitions of 600x600 mm size fixed to wall/roof with rawl plugs & screws and hanged to roof with SS suspender of suitable length and drilling screw to RCC roof complete all as specified and as directed (i) Main tee of size -35mmx25mmx0.7mm (ii) cross tee of size -35mmx25mmx0.7mm (iii) wall angle -25mmx25mmx0.7mm |
| 78 | Supply & fixing 3mm thick Aluminium composite panel cladding plain of approved colour/shade to facia of slab/beam/column/slab in circular/ rectangular shape including cutting, notching, bending to shape as required jointing with silicon gel of approved colour, with and including aluminium square tubular hollow section 25 x 25 mm not exceeding 900 mm c/c on MS pipe purline/rafter/column beam/slab to hold ACP cladding etc including takingdown old unserviceble aluminium composite panel. (Note : Colour / Pattern of ACP sheet shall be as approved by GE) complete all as specified and directed by Engineer-In-Charge |
| 79 | Demolition and removal of existing APP (Atactic Polypropylene Polymer) modified Bitumen water proofing sheet from roof surface, including scraping of adhered bituminous layer, cleaning of surface from loose residue and disposal of debris to the dumping ground within 50 metres lead. |
| 80 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. |
| 81 | S&F for Solid PVC Wall Lining consisting of 5mm thick Single side Prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed by Engineer-In-Charge. |
| 82 | S & F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.Note: Works shall be carried out upto G+05 storey bldg. Rate incl removal of all debries outside of MD land and necessary scaffolding & Safety Net Cloth at places. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender