Tender For Renovation Of Toilets In Canteen-Ii And Additional Toilet Facility In Works Building & Admin Building At Hwpm.
Tender Value
67.72 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
1 days left
EMD
1.35 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhadradri Kothagudem → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Renovation Of Toilets In Canteen-Ii And Additional Toilet Facility In Works Building & Admin Building At Hwpm.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-Sep-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundations in all types of soils other than soft and hard rock, back filling in plinth and around foundations with excavated soil in layers not exceeding 150 MM, watering, consolidating including shoring/ strutting, de-watering and disposing off surplus earth within plant premises. etc., all complete as per drawings, specifications and as directed by the Engineer in Charge. |
| 2 | Up to 1.5 m depth |
| 3 | Below 1.5 m depth |
| 4 | Providing and laying Plain cement concrete of 1:2:3.5:9[1 cement,2sand,3.5 Fly ash, 9 stone aggregate] grade, with ACC/Ultratech/Birla A1 or any other approved cement using 40mm and down gauge crushed stone aggregate of approved quality in foundation and plinth, strom water drains, under floors, pavements, footings, pedestals etc. including centering and shuttering, spreading, leveling, ramming, finishing, curing etc. complete as per specifications and as directed by the Engineer-in-charge. |
| 5 | Providing and laying Plain cement concrete of 1:3:6[1 cement,3sand 6 stone aggregate] grade, using 40mm and down gauge crushed stone aggregate of approved quality in foundation and plinth, under floors, pavements, footings, pedestals etc. including centering and shuttering, spreading, leveling, ramming, finishing, curing etc. complete as per specifications and as directed by the Engineer-in-charge. |
| 6 | Supplying and filling with sand below foundation, including watering,ramming, consolidating and dressing etc. complete as per specifications and as directed by EIC. |
| 7 | Providing and laying in position specified grade of reinforced cement concrete,1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). make of ACC/ULTRATECH/BIRLA/JAYPEE cement grade of OPC-43, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete, laying at site, spreading and compacting mechanically by using needle and surface vibrator, curing by hassien cloth, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge. The cement consumption for this item is 400Kg/Cum. In addition to the cement the agency has to add 40Kg of fly ash per Cum of concrete. The total cementitious content will be 440kg/Cum. Ash from field No2 of boiler in CPP of HWPM will be issued free of cost to the contractor. It will be the sole responsbility of the contractor to match the property of fly ash to Grade I of IS 3812 before being used in the works. the rate for concrete shall also included. |
| 8 | Upto a plinth level |
| 9 | Above plinth level |
| 10 | Centering and shuttering including strutting, Propping etc, and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc., with water proof ply 12 mm thick complete as per specifications and as directed by the Engineer in Charge. |
| 11 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 12 | Foundations, footings, bases of columns, etc. for mass concrete with water proof ply 12 mm thick |
| 13 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 14 | Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick |
| 15 | Suspended floors, roofs, landings, balconies and access platform |
| 16 | Extra for additional height in centering, shuttering with water proof ply 12 mm thick where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). Suspended floors, roofs, landing, balconies and beams Height between 3.50 metre to 7.50 metre From G.L |
| 17 | Providing, laying and fixing in position TMT reinforcement bars of TATA/VIZAG STEEL/SAIL/JINDAL for RCC works, including cost of supplying, cutting, bending, transporting, erecting, binding with 16 gauge MS annealed wire, cement mortar spacer blocks etc. complete as per specifications and as directed by the Engineer in charge. |
| 18 | Supplying and fixing 110mm dia size uPVC UV Stabilised soil/ waste quality pipes and fittings (SWR) for soil, waste, vent, antisyphonege, HVAC waste pipe and rainwater pipe lines with Single socketed pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, consisting following items of work:- i) Supplying uPVC UV-Stabilised Soil/ waste pipe as per IS:13592 Type A and IS:14735 Grade-B Fittings of Supreme make (fittings will be measured as part of the line by linear measurement along the pipe line; and no separate payment is made. No claim whatsoever will be entertained in this regard). ii) Jointing the pipe with Solvent Cement & Rubber ring gasket with making holes in walls/ floor grooving and redoing the same and brick support etc. Giving water-tightness test for the pipes laid as per codal provisions. Providing Ring Joint pipes at verticals and solvent cement jointed pipes at consealed locations. iii) Necessary cutting to the required length including short pieces, fittings with or without door, assorted fittings such as plugs, tees,couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets etc., all complete as per specifications and as directed by the Engineer in Charge |
| 19 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams etc., all complete as per drawings, specifications and as directed by the Engineer in Charge. |
| 20 | Dismantling C.I. or asbestos rain water 100 mm dia pipe with fittings and clamps including handing over the serviceable material to sectional stores and disposal of unserviceable material etc., all complete as per drawings, specifications and as directed by the Engineer in Charge. |
| 21 | Demolishing brick work in lime/cement mortar manually/ by mechanical means including handing over of serviceable material to sectional stores and disposal of unserviceable material within plant premisses as per direction of Engineer-in-charge. |
| 22 | Removal of stationary items and keeping the same at original position with help of Man Power all complete as per specifications and as directed by the Engineer in Charge. |
| 23 | Providing and fixing brass curtain rods of 20 mm diameter, wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs including removal of old curtain brackets etc. wherever necessary all complete as per drawings, specifications and as directed by the Engineer in Charge. |
| 24 | Dismantling tile work carefully of thickness of tiles 10 mm to 25 mm in floors laid in cement mortar including disposal of unserviceable surplus material and stacking within 50 metres leads and lifts etc., all complete as per specifications and as directed by the Engineer in Charge. |
| 25 | Demolishing concrete 1:4:8 or leaner mix (i/c equivalent design mix)cement concrete manually/ by mechanical meansincluding disposal of material within 50 metres lead as per direction leads and lifts etc., all complete as per specifications and as directed by the Engineer in Charge. |
| 26 | Removal/Dismantling of W.C. Pan/European type water closet (EWC)/Wash Basin/Urinal basin of all sizes including stacking of serviceable items and disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 27 | Providing and laying of underground drainage / Sewerage while in service with uPVC pipes of SN 8 class (SDR-34) conforming to IS : 15328 of make Finolex/ PRINCE including cost of spigot and socket end pipes, specials, cutting , jointing with PVC solvent cement as required testing etc., all complete as per specifications and as directed by the Engineer in Charge.(Note : cost for the excavation and re-filling will be paid under relavent item) |
| 28 | 200 mm OD uPVC pipes SN8 class |
| 29 | 315 mm OD uPVC pipes SN8 class |
| 30 | Construction of Gully Chambers of size 300 x 300 x 300 with half brick masonry over a bedding of 100mm thick PCC 1:4:8 including 15mm thick plastering inside and outside, Providing and fixing new gully trap of size 100 x 100mm including 50mm thick precast cover of size 530 x 530mm with welded mesh 50 x 50 x 3mm etc., complete including dismantling of old damaged chamber, stacking and handing over of serviceable materials in sectional stores, disposing of unserviceable materials within the plant premisses etc., all complete as per specifications and as directed by the Engineer in Charge. |
| 31 | Providing and fixing in position white vitreous china WC pan suite of approved make of Hindware/parryware or equivalent and quality with 100mm cPVC 'P' or 'S' trap, connecting the water closet with the soil pipe etc. complete as per drawings, specifications and as directed by the Engineer, comprising of the following and all complete as per specifications and as directed by the Engineer in Charge.a) Indian Orissa type WC pan (integral type foot rests) of size 580 mm x400mm front or back inlet with 100 mm dia cPVC \\"P\\" or \\"S\\" trap conforming to IS:2556.b) 10 lit. low level white PVC flushing cistern of parryware slimline or equivalent with manually controlled device, PVC flush bend pipe conforming to IS 7231; with all fitting and fixtures brackets and overflow pipe with specials and mosquito proof coupling of approved Municipal design complete including cutting and making good the walls wherever required. c) Setting WC pan in CC 1:5:10 including making necessary connection to soil pipes etc. complete as per drawings, specifications and as directed by the Engineer.d) Providing and fixing in position 15 mm dia PVC water inlet connections with CP brass nut on both ends and of required length.e) 15mm dia screw down heavy quality C.P.Brass stop cock conforming to I.S.781 etc. complete as per drawings, specifications and as directed by the Engineer |
| 32 | Providing and fixing white vitreous china European type water closet conforming to IS 2556 (part I) suite of approved make of Hindware/parryware or equivalant and quality, with ISI marked black solid plastic seat and lid, Connecting European type water closet with the soil pipe etc. complete as per drawings, specifications and as directed by the Engineer, comprising of the following and all complete as per specifications and as directed by the Engineer in Charge.a) European type water closet conforming to IS 2556 (part I) with integrated ‘P’ or ‘S’ trap including removal of old trap handing over the same to sectional stores etc. complete.b) Thermoplastic seat and cover of antibacterial type conforming to IS 2548 with C.P. brass hinges and rubber buffers of antibacterial type.c) 10 litres capacity low level white PVC flushing cistern slimline of parryware or equivalent with manually controlled device conforming to IS 7231 with 38 mm dia PVC flush pipes and overflow pipe with specials and mosquito proof coupling of approved Municipal design and all fittings, fixtures and brackets.d) Providing 15 mm dia PVC water inlet connections with CP brass nut on both ends and of required length, fixing in position and overflow pipe with specials and mosquito proof coupling of approved Municipal design etc. complete as per design, direction and specifications.e) 15mm dia screw down heavy quality C.P.Brass stop cock conforming to I.S.8931f) Connecting European type water closet with the soil pipe etc. complete as per drawings, specifications and as directed by the Engineer |
| 33 | Providng and fixing 15 mm dia CP brass health facet with CP two way bib cock complete as per drawings, specifications and as directed by the Engineer |
| 34 | Providing and laying Ceramic Anti-skid floor tiles of size 300x300 mm of JOHNSON/KAJARIA/SOMANY or approved make (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved colour laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc.,complete all as per directed by Engineer in charge. |
| 35 | Providing and fixing Ist quality ceramic glazed wall tiles of size 300x300xmm/300x450mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of SOMANY/KAZARIA/JHONSON or other approved manufacturer, as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade all complete as per specifications and as directed by the Engineer in Charge. |
| 36 | Providing and fixing good quality white vitreous china flat back single half stall urinal of 580 x 380 x 350 mm of parryware/ Hindware/ seabird/ orient/ Cera/ Rak make with fittings, standard size C.P.brass flush pipe, 15mm nominal bore PVC connection pipe of 45 CM long, 32 mm colapsable waste pipe of length 900 mm, 15mm CP brass stop cock, spreaders with unions and clamps (all in C.P.brass) with waste fitting as per IS : 2556, cPVC trap with outlet grating and other couplings (with C.P.brass) etc. including painting of fittings and cutting and making good the walls and floors where ever required etc., all complete as per specifications and as directed by the Engineer in Charge. |
| 37 | Providing and fixing stone slab table rubbed, edges rounded and polished of Granite Stone of approved shade, size 75x50 cm deep and 1.8cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth etc., all complete and as directed by the Engineer in Charge. |
| 38 | Providing and fixing White Vitreous China Wash basin of Parryware make (model: ZEST C041D) of size 565mm x 410mmx 195mm including C0318 model short pedestal of parryware make and one no' of 15 mm dia C.P. brass pillar tap, fixing with C.I. brackets/ SS rack bolts, 32 mm C.P. brass waste coupling of standard pattern, suitable size waste pipe of parryware make, painting of fittings and brackets, cutting and making good the walls wherever required and including all complete as per specifications and as directed by the Engineer in Charge. |
| 39 | Providing and fixing 32 mm C.P. brass waste coupling of standard pattern, suitable size waste pipe of parryware make cutting and making good the walls/slab wherever required and including all complete as per specifications and as directed by the Engineer in Charge. |
| 40 | Providing all tools tackles manpower material machinery required for placing in position 100mm dia inlet & outlet cPVC gully / nahani trap as per IS 1729 with SS grating plate with/without hole for inserting 32 mm waste pipe, trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors etc., all complete and as directed by the Engineer in Charge. |
| 41 | Providing and fixing beveled edge mirror of size 450 x 350mm outer dimensions of parryware/ jaquar make of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass capped screws and washers, including removing of old mirror and handing over to the sectional stores etc., all complete as per specifications and as directed by the Engineer in Charge. |
| 42 | Providing and fixing rectangle shape looking mirror of size 1500x450 mm of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc., all complete as per specifications and directed by the Egnineer in Charge. |
| 43 | Providing and fixing CP brass long body bib cocks of approved quality confirming to IS standard and weighing not less than 550 gm 15mm nominal bore including all manpower, tools, tackles including removal of existing brass bib cocks and handing over to sectional stores complete and as directed by the Engineer in Charge. |
| 44 | Providing and fixing powder coated coat hook fixed to the door shutter or wall in the toilet room including required screws etc.complete as directed by the Engineer in Charge. |
| 45 | Providing and fixing stainless steel Hanger of Godrej/IKEA/Wipro or equivalent brand for Keeping wash Towel to the wall near wash basin in toilet room including required screws etc.complete as directed by the Engineer in Charge. |
| 46 | Providing and fixing 500 ml capacity wall mounted Soap Dispenser of Godrej/IKEA/Wipro or equivalent brand, soap dispenser with easy to fill soap liquid including all complete as directed by the Engineer in Charge. |
| 47 | Providing and fixing structural steel members of angle sections for door frames, T-iron sections for ventilator frames and factory made ISI marked steel glazed ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc., complete of standard rolled steel sections, frames fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), joints mitred and welded, including fixing of necessary applying a priming coat of approved steel primer and two coats of synthetic enamel paint of approved brand etc., all complete as per specifications and as directed by the Engineer in Charge. |
| 48 | Providing and fixing factory made 30 mm thick solid non Decorative finish door shutter made of solid WPC (Wood Polymer Composite) profile.750mm x 2100mm (size may vary as per the site condition) of brands like( GREENPLY/ HARDYPLAST / CENTURY PLY) or any other approved make . fixing with 300mm stainless steel\\"T\\" hinges (3 Nos) to the existing frame with welding, including fixing of standard hardwares & fixing of aluminium grade AC 10 as per IS : 1868 Aldrop of size 250mm x 16mm - 1No, latch 250mm x 20mm x 6mm - 1 No and door handles of 125mm size - 2 No's, Aliminium Tower bolt of size 200mm x 10mm - 1No etc., complete all as per manufacturer's specifications and direction of Engineer-in-charge. |
| 49 | Providing and fixing 35 mm thick ISI marked flush door shutters conforming to IS :2202(Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters and all necessary fittings and fixtures such as, ISI marked stainless steel butt hinges with necessary screws, stainless steel aldrop-2 no of 250 x 16 mm, bright finished brass tower bolts 150 x 10 mm (barrel type) with necessary screws 2 No, bright finished brass handles 125 x 10 mm 2 Nos with screws, two coats of synthetic enamel paint over a coat of steel primer on door frames etc, all complete as per specifications and as directed by the Engineer. |
| 50 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete as directed by Engineer in Charge. |
| 51 | Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc. all complete and stacking in deparmental store as directed by Engineer in Charge. |
| 52 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 53 | Providing & fixing fly proof wire gauze (mesh) of Stainless steel (grade 304) made out of 0.5 mm dia wire and 1.4 mm aperture (both ways) to windows, clerestory windows & doors including replacing damaged M.S. Flat 15x3 mm, fixing wiht nuts & bolts complete including cutting to size, fixing with C.P. brass / stainless steel screws etc. all complete as per the directions of Engineer-in-charge. |
| 54 | Providing and laying half brick masonry with Flyash lime brick masonry of class 10 designation in CM 1:4 (1 cement : 4 coarse sand) in super structure including curing, provision of scaffolding etc., all complete as per specifications and as directed by the Engineer in Charge. |
| 55 | Providing and laying Fly Ash brick masonry work with non modular bricks of size 230mm x 110mm x 75mm, fly ash lime bricks (FALG Bricks) conforming to IS:12894, having crushing strength not less than 10N/mm2 in CM 1:6 (1 cement : 6 coarse sand) at all heights including curing, scaffolding wherever required etc., complete all as per specifications and as directed by the Engineer in Charge. |
| 56 | Providing and laying 12 mm thick cement plaster in cement mortar 1:4 (1 cement: 4 fine sand) proportion over brick/ RR masonry/ Concrete walls, floors and other surfaces including providing and mixing approved water proof compound for external plaster in the proportion recommended by the manufacturer, raking of joints, hacking the concrete surfaces, scaffolding where necessary, curing etc., all complete as per drawings, specifications and as directed by the Engineer in Charge. |
| 57 | Providing and laying 15mm thick cement plaster in cement mortar 1:4 (1 cement: 4 fine sand) proportion over brick/ RR masonry/ Concrete walls, floors and other surfaces including providing and mixing approved water proof compound for external plaster in the proportion recommended by the manufacturer, raking of joints, hacking the concrete surfaces, scaffolding where necessary, curing etc., all complete as per drawings, specifications and as directed by the Engineer in Charge. |
| 58 | Providing and laying 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement on R.C.C. slabs and beams including hacking the concrete surfaces, scaffolding where necessary, curing etc., all complete as per drawings, specifications and as directed by the Engineer in Charge. |
| 59 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth all complete as per specifications and as directed by the Engineer-in-charge. |
| 60 | Providing and applying Two or more coats of 1st quality Acrylic distemper (internal walls) of assian paints/burger/nerolac or equivalent brand with dry distemper of approved brand and manufacture of required shade on new work, over and including water thinnable priming coat to give an even shade including surface preparation, filling up of the holes and cracks with approved filling materials, scaffolding, cleaning, arranging safety appliances, insurance coverage to workers, all complete as per specifications and as directed by the Engineer-in-charge. |
| 61 | Finishing walls with Acrylic Smooth exterior paint of assian paints/burger/nerolac or equivalent brand of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including surface preparation, filling up of the holes and cracks with approved filling materials, scaffolding, cleaning, arranging safety appliances, insurance coverage to workers, all complete as per specifications and as directed by the Engineer-in-charge. |
| 62 | providing all tools and tackles manpower materials and fixing (concealed) G.I pipes of class B confirming to IS:1239, with ISI mark embossed of M/s.TATA or equivalent brand make with GI fittings and clamps including cutting and making good the walls, painting with 2 coats of bitumastic paint to the concealed pipe and synthetic enamel paint for exposed pipe line etc complete as per specification and as directed by the engineer. |
| 63 | 20 mm nominal bore |
| 64 | 15 mm nominal bore |
| 65 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank etc., all complete and as directed by the Engineer in Charge. |
| 66 | Dismantling 15 to 40 mm dia G.I. pipe including handing over sectional store of serviceable material and disposal of unserviceable material within plant premisses as per direction of Engineer - in- charge.(a) Internal Work- Exposed on wall |
| 67 | Demolishing R.C.C. work manually/ by mechanical means including handing over sectional store of steel bars and disposal of unserviceable material within plant premisses as per direction of Engineer - in- charge. |
| 68 | Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within plant premisses as per direction of Engineer-in-charge. |
| 69 | Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials within plant premisses as per direction of Engineer-in-charge. |
| 70 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular)\ bricks of class designation 7.5 |
| 71 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors including door locking arrangements, windows with three shutters, three tiers for the moving shutters in window frame having middle frame with stainless steel mesh, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately). |
| 72 | Providing and fixing glazing with float glass panes of thickness as below in aluminium door, window, ventilator shutters and partitions etc. including EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . |
| 73 | 5.0 mm thickness (weight not less than 12.50 kg/sqm) |
| 74 | Providing 'HOE' (Excavator Cum Dozer) for miscellaneous works inside the plant boundary at various locations including all operational cost etc., as directed by the Engineer in Charge. |
| 75 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply (exposed on wall) and all CPVC & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing, jointing the pipes & fittings with CPVC solvent , connecting to near by GI pipe line with appropriate fittings and testing of joints complete as per specification and as direction of Engineer in charge. |
| 76 | 20mm nominal dia pipes |
| 77 | 25mm nominal dia pipes |
| 78 | Providing and fixing machine moulded Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron) covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge. |
| 79 | Providing and fixing pre-moulded joint filler in expansion joints of RCC stuctures after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 (One RM considered as 2.50 cm Width and 30.0 cm depth) |
| 80 | Supplying of heavy duty door closer of Hardwin/Godrej make or equivalent brand. (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 85 kg and door width upto 1250 mm)with adjustable closing speed and necessary accessories & screws. |
| 81 | Supplying of 150 mm bright finished floor brass door stopper with rubber cushion to suit shutter thickness complete of Hardwin/Godrej make or equivalent brand. (having brand logo with ISI, embossed on the body, overall weight of door stopper 357 grams with necessary brass screws etc. |
| 82 | Fixing UPVC pipes to the existing Manhole Chamber by Cutting holes suitable to fixing UPVC pipe of 300 mm dia. in walls including closing the joint between stone ware pipe and manhole chamber with cementituios grounting material making good the same, removal of dirt/malba/leaked sewage water/loose soil, Cleaning and desilting of rubbish mixed with earth etc. and disposal of same in existing manhole chamber and around complete all as per specification and as directed by the engineer. |
| 83 | Laying Plaster drip course/ groove in plastered surface or moulding to R.C.C. Projections concrete walls, floors and other surfaces including providing and mixing approved water proof compound for external plaster in the proportion recommended by the manufacturer, raking of joints, hacking the concrete surfaces, scaffolding where necessary, curing etc., all complete as per drawings, specifications and as directed by the Engineer in Charge. |
| 84 | Demolishing RR masonry work including removing and disposing the dismantled material at designated places and stacking of serviceable materials all complete as per specification and as directed by the Engineer-In-Charge. |
| 85 | Laying Random Rubble Masonry with available serviceable condition stones from the Dimolished RR Masonry in CM 1:6(1 cement: 6 coarse sand) in foundation and plinth, drains etc. including providing leveling course of cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) on top most layer, curing etc. complete as per specifications and as directed by the Engineer-in-charge. |
| 86 | Supplying and stacking of the 32 mm dia. G.I pipes of class B (Medium duty) confirming to IS:1239, with ISI mark embossed of M/s.TATA or equivalent brand make with both ends threaded and having socket at one end all complete material as per specifications and as directed by the Engineer. |
| 87 | Providing and fixing 100 mm diameter C.P. brass shower rose with 15 or 20 mm inlet with all fittings components including gate valve, GI Pipe fittings etc., all complete as directed by engineer in Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Sep 07, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 14, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 daySep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender