Tender For Painting And Repair Of Flooring, Roof Shed, Plinth, Drain And Other Miscellaneous Repairing Works In Workshop Complex At Rangit Power Station
Tender Value
38.84 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
18 days left
EMD
78000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
West District → Sikkim
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Painting And Repair Of Flooring, Roof Shed, Plinth, Drain And Other Miscellaneous Repairing Works In Workshop Complex At Rangit Power Station
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retainingwalls and other structure comprising of masonry, cement concrete, woodwork, steel work, including T&Pand scaffolding wherever necessary, sortingthe dismantled material, disposal of unserviceable material and stackingtheserviceablematerialwithall liftsandlead of 1000 metres) Cement Concrete Grade M-15 & M-20. |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 3 | Dismantling roofing including ridges, hips, valleys and gutters etc. and stacking the material within 50 metres lead of: G.S. Sheet. |
| 4 | EARTH WORK IN FOUNDATION TRENCHES:Excavation work by mechanical means (Hydraulic Excavator) manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m. |
| 5 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual). |
| 6 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:2:4 mix. (1cement, 2coarse sand, 4 graded stone aggregate of 20mm & down size). |
| 7 | Providing and Laying Random Rubble Stone Masonry in1:4:8 c.c. (1 cement, 4 sand, 8 clean hard graded stone chips of 40 mm nominal gauge) including bond stone, through stone of size 150 mm x 150 mm x 450 mm manufactured in1:4:8 (1 cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down), curing etc , complete as per the direction of Engineer in Charge excluding the cost of carriage of materials. |
| 8 | Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. 1:4 Mix |
| 9 | 12 mm cement plaster finished with a floating coat of neat cement of mix: 1:4 (1Cement: 4 fine sand). |
| 10 | Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 11 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with bitumen white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/vertical or curved surface), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zincx coating not less than 275 gm/sqm. |
| 12 | Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.80 mm thick with zincx coating not less than 275 gm/sqm. |
| 13 | Providing valleys of 90 cm wide overall in plain G.S. sheet with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet washers complete. 1.60 mm thick with zincx coating not less than 350 gm/sqm. |
| 14 | Providing, fitting and fixing water proof flush door shutters, solid block hard core construction with frame of 1st class hard timber with well matched 3 mm teak ply decorative type on one faces of the shutters including hinges with screws complete. 32 mm |
| 15 | Providing & Fixing decorative high pressure laminated sheet of plain/wood grain in gloss /matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick |
| 16 | Providing and Fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6 mm for diagonal braces and central cross piece. |
| 17 | Fixed window/ventilator made of (small series) frame 47x50 mm & mullion 47x68 mm both having wall thickness of 1.9± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) |
| 18 | Renewing glass panes, with putty & nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10 kg/sqm). |
| 19 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete, MS (Bright Finish) |
| 20 | Providing, fitting and fixing. handles 125mm size with necessary screws etc complete, M.S. |
| 21 | Providing and Laying 25 mm thick kota stone slab flooring over 20 mm thick 1:4 cm base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and polishing complete. |
| 22 | Providing and Laying kota stone slabs 25 mm thick in Risers of steps, skirting dado and walls laid on 12 mm thick (average) thick base of c.m. 1:3 (1cement, 3 coarse sand) and jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbing and polishing complete. |
| 23 | 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Stone Aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 Cement Hardener Mix : 2 Graded Stone Aggregate, 6 mm nominal size) by volume, haedening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 24 | Providing and Laying white or colored glazed tiles anti skid (elegant, cashmere, Egyptian rustic, celebrity, lara etc or equivalent) of glossy series or celebrity, elegant or equivalent in flooring, treads of steps landing etc of size 300mm x 300mm laid on a bed of 15mm, cm 1:3 (1cement, 3coarse sand) finished with flush pointing with white cement slurry. |
| 25 | Providing and Laying white or colored or ceramic glazed tiles of size 200mm x 300mm luster printed (loreno, bronzo, colubia or equivalent) in skirting, risers of steps and Dados on 12mm thick cement plaster (1cement, 3coarsed sand) 1:3 bare and jointed with white cement slurry. |
| 26 | Providing and Providing and painting on G.S. sheet one or more coats with ready mixed paint to give an even shade including cleaning of surface of dust etc complete on old surface. |
| 27 | Providing and painting with ready mixed Enamel paints of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
| 28 | Providing and Providing and painting with acrylic exterior paints of quality and make equivalent to EXCEL, WEATHER SHIELD to give an even shade including brushing the surface clean of dirt, dust etc. and sand papering and filling the scratches complete on New surface. |
| 29 | Providing and distempering with oil bond washable acrylic distemper on old surface of approved brand and manufacture to give aneven shade including preparation of surface etccomplete. |
| 30 | Providing, Fitting and fixing GI pipe of medium class, (excluding trenching, refilling, compacting and the cost of fittings) all complete. (15 mm dia G I pipe). |
| 31 | Loading and unloading of stone boulder/stone/aggregates/sand/ kanker/moorum. |
| 32 | Loading and Unloading of Cement or Steel by Manual Means and stacking. |
| 33 | Cost of haulage excluding loading and unloading- Surfaced road: -Non-stock & stock materials Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysSep 22, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender