Tender For Repair/Replacement To Compound Wall, Barbed Wire Fencing, Chainlink Fencing, Concertina Coil, Angle Iron Post/Pickets In Stone Masonry/Brickwork/Pcc Block And Strom Water Drain, Rolling Shutters, Steel Gates, And Other Connected Misc Works At I
Tender Value
44 Lakhs
Estimated cost
Bid Submission
11 Sep 2026
0 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bengaluru Urban → Karnataka
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/Replacement To Compound Wall, Barbed Wire Fencing, Chainlink Fencing, Concertina Coil, Angle Iron Post/Pickets In Stone Masonry/Brickwork/Pcc Block And Strom Water Drain, Rolling Shutters, Steel Gates, And Other Connected Misc Works At Iam, Iamoes And Vv C (Challagatta) Under Ge (Af) Marathahalli
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar , incl all quions, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 2 | Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 3 | M&L for concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundation, filling and mass concrete all as specified and directed. |
| 4 | M & L for Walling of squared rubble,regular coursed, well bonded,bedded and solidly hearted masonary built in CM 1:6 including hammer dressing all as specified and directed. |
| 5 | All as per above Item No 4 but except material , complete all as specified and directed. |
| 6 | M&L for raised pointing to rubble or polygonal rubble, uncoursed or brought up to coarse with CM 1:3 |
| 7 | Material and labour for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width Type C1 1:3:6 (20 mm graded aggregate ) and setting in mortar CM 1:6, complete. |
| 8 | Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc |
| 9 | M & L for Rendering 15mm thick cement mortar in 1:4 on fair faces of brick work or concrete surfaces even and smoothe without using extra cement. |
| 10 | Material and Labour for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, mud stops, benching, water tank platform etc.on roof, chajja weathering, slightly rounded or chamfered angles and throating etc. including necessary form work complete as directed. |
| 11 | Dismantling of stone slabs and tiles of any description or thickness in floors,aprons etc. |
| 12 | M&L for chequered cement concrete tiles 30cmx30cmx25mm thick,set,jointed in neat cement slurry in floors with grey pigment cement and pigments.including 20 mm thick screed bed or bedding layer of motar 1:6, including complete all as specified and directed. |
| 13 | M & L heavy duty pavement tiles of size 400 mm x 400 mm x 12 mm /300 mm x 300 mm x 12 mm thick for out door spaces any colour/pattren of (acid skid , anti bactireal , stain resistance & scratch resistant, tiles) set jointed and pointed in chemical laid over 15 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. |
| 14 | M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade glossy finish, finishing with grey cement and no pigment in cluding packing of edges complete ll as specified and dircted. |
| 15 | M & L sand cushining under paver block complete all as specified and direted. |
| 16 | M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Cement Base Paint of approved tint over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified |
| 17 | M&L for Preperation of old decorated wall surfaces including brooming down or steel wire brushing, scraping down smokes soot, module, moss and effloroscent salts, trading oil and greasy spots and applying one coat of cement based paint on walls complete all as specified. |
| 18 | M & L Preparationf of Old wall surface and applying one coats of 100% premium acrylic emulsion paint ( 200 micron )having VOC less thean 50 gm / litre and UV resistance as per IS- 15489-2004, Alkali & fungal resitance, dirt resistance exterior paint of required shade (Company Depot Tinned) with silicon additives @ 1.43 litre / 10 sqm over complete all as specified and as directed. |
| 19 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete with and including dismantling corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.completed all as specified and directed |
| 20 | Dismantiling wrought iron or mild steel work of any description not otherwise provided for etc comoplete all as specified. |
| 21 | S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) coforming to Fe 410 -W (Gde E-250) Quality -A all as specified and directed. |
| 22 | M & L for framed work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed. |
| 23 | M&L Preparing new steel surfaces of any description, over 10cm in width/girth, applying two coats of synthethic enamel paint over one coat of red oxide primer. |
| 24 | S & F in repairs for Galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing and straining and fixing to any type of strandard rails straning bolts, incl, securing or tying at crossings with and provision of galvanised mild steel, wire staples or steel pins etc complete all as specified and directed. (each line wire to be measured separately). |
| 25 | Restraining and rescuring including making good staple of Galvanised 2 strand, steel barded wire 2.24mm dia barbed with 2mm dia barbs at 75mmmm spacing andincluding securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins,etc complete all as specified and directed. (each line wire to be measured separately). |
| 26 | Supply and Fixing in repairs for zinc coated concertina coil of thickness 2.50 mm of core wire and 0.5 mm thick cold rolled carbon strip (dia approx 610 mm that covering 6 mtr length and 50 spirals) having weight not less than 8.00 Kg per coil all as directed. |
| 27 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, TMT bars for stiffing , including makinf holes for angle iron or ms flat as required for fixing of bolt and nut bolting etc. including provission of binding wire complete all as specified and directed. |
| 28 | S & F Chain link MS galvanisd fencing, any size or type dia of wire not less than 3 mm thick and 50 mm size mesh complete all as specified and directed . |
| 29 | Excavating in trenches in hard/dense soil, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out complete. |
| 30 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete. |
| 31 | Removing excavated material/soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete. |
| 32 | M & L Cement concrete 1:3:6 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc. |
| 33 | Extra for forming fair finished drain or channel up to 55 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc. |
| 34 | Demolition of Concrete of any description (reinforced) and in any position not otherwise specifically provided for all as specified. |
| 35 | M & L for Providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) set in CM 1:4 in cover slabs (for man holes etc.) and similar articles with plain faces all as specified and as directed. |
| 36 | M & L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified. |
| 37 | Supply and fixed in repair safety locks mild steel with 4 levers for rolling shutter including removal of existing locks and fixing of new lock with complete accessories complete all as specified and directed. |
| 38 | Supply and fixed in repair ball bearing for rolling shutter including of removing of top cover of rolling shutter of any specifiction , fixing of new ball bearing , refixing of top cover of rolling shutter complete all as specified and directed. |
| 39 | Fixing only in repair of rolling shutter including of removing of top cover of , greasing , removing og bending of shutters , new fixing of anchoring rod, hasp, servising of springs , shutter running channels , etc , of rolling shutter of any specifiction , refixing of top cover of rolling shutter and make smooth opening and closing rolling of shutter, of shutter of any size , gear operated, or chain and pully etc , completed all as specified and directed. |
| 40 | Removing building materials etc,exc 1.5km to a distance 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed. |
| 41 | Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc of capacity exc 500 ltr but n exc 1000 ltr complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender