Tender For Repair To Compound Wall, Foot Path, Kerb Stone Hard Standing And Other Misc B/R Works At Rashi Area Under Age B/R-Ii (Nw) Navy Nagar.
Tender Value
30 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
13 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Compound Wall, Foot Path, Kerb Stone Hard Standing And Other Misc B/R Works At Rashi Area Under Age B/R-Ii (Nw) Navy Nagar.
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc and removing debrish from out side defence land complete all as specfied and as directed. |
| 2 | Material & labour for stone masonry wall of random rubble, uncoursed, well bonded, bedded and solidly hearted,built in CM 1:6 complete all as specfied and as directed. |
| 3 | Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses walls built in cement mortar complete all as specfied and as directed. |
| 4 | Material & labour for raised pointing to random or polygonal rubble, un coursed or brought upto courses in cement mortar 1:4 complete all as specified and as directed. |
| 5 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 mtr mean redious built in CM 1:4 all as specified |
| 6 | Taking down cement plaster of any description etc. including raking out joints, hacking for key, scrubbing down with water, etc. Including removal of debris out side MD land complete all as specified and directed by Engr-in-charge. |
| 7 | Providing and applying fair finish 15mm thick plaster with ready mix prepacked proportioned dry mix mortar fair faces of brick wall or concrete surfaces ,wall surfaces including transporting of material, mixing, curing, etc.complete as per direction of Engr-in-charge.MAKE: M/s ACC Accoplast/ M/s Ultratech Readiplast/ M/s Magicrete Magicplast/ CK Birla's AEROCEN |
| 8 | M & L for preparing newly plastered or unplastered surfaces and applying two coats of acrylic based exterior paint over a coat of primer on walls complete all as specified and directed by Engr-in-charge. |
| 9 | Material & Labour for prepration of old paint surface and apply one coat of synthetic enamel paint on steel surfaces of any description complete all as specified and directed by Engineer-In-charge. |
| 10 | Preparation of old decorated surfaces of walls by any means scrapping old surface washing the surface with Bleaching powder throughly, filling the cracks with cracks filling compound as per manufacturer instruction & applying one coat of anti algal water-based Elastomeric exterior wall finish including scaffolding etc all as specified & directed. |
| 11 | M&L cleaning the existing surfaces of chequered tiles/paver blocks and applying one coats of floor guard paint (1st quality as approved by GE) complete all as specified and directed by Engr-in-charge |
| 12 | Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas, chimny and similar suspended work including cutting of reinforcement cut as required to facilitate demolition including removing of debris out side MoD land complete all as specified and directed by Engg-In- Charge (Reinforcement cut as reqd to facilitate to demotion) |
| 13 | Providing and fixing special water tight centering and shuttering including bolting, strutting, propping etc. so as to withstand a pressure of 0.1 Mpa including removal of form from all locations including beams, columns, slabs, walls, foundations, footings, landings, stairs, balconies etc. complete all as specified and as directed. |
| 14 | M&L for Reinforced cement concrete (nominal mix) 1:2:4 (using 20mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and as directed by Engr-In- Charge. |
| 15 | Material & Labour for mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engg-In- Charge. |
| 16 | Dismantling of Stone slabs and tiles laid bedded and pointing in any mortar of any description or thickness in floors, aprons skirting/dado etc complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L for 18-20 mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms over including bedding layer of 20mm thick in cement mortar (1:4) for laying floor finishes including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite Complete all as specified and as directed by Engineer-In-charge. |
| 18 | Dismantling roof sheets / wall cladding etc complete all as spcified and as directed. |
| 19 | Excavation in hard/dense soil for post holes or similar holes each n. exc. 0.5Cum getting out returning filling and ramming earth or broken rabble mixed with earth around in layer n. exc. 25cm all as specified and directed. |
| 20 | M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation etc complete all as specified and directed. |
| 21 | S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 22 | S&F Pre- painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 23 | Supply, fabrication and erection of structure on any shape (round, oval or box type) for 3mm thick Aluminium composite panel cladding made of aluminium channel (25 x 50 x 1.6mm) with cleat angle (8 x 18 x 2mm) necessary hardware with material and material and weather sealant to make joint leak proof and supply and fixing of 3mm thick PVDF coating Aluminium composite panel complete in all respect of Indo bond or equivalent make as per approval of GE. Spacing of the channel should be as per manufacture instruction |
| 24 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 25 | Material & Labour for providing and fixing stainless steel (Grade 304) railing/ grill made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 26 | M&L for framed work as in doors or gates of angle or other section with gusset plates, with Fe-290 (Gde E165) quality A complete all as specified., drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging; also fastening and fixing complete all as specified. |
| 27 | M&L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 28 | M&L Plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) fixed to angle iron frame complete all as specified. |
| 29 | M & L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etc with Fe-290 (Gde E165) quality A complete all as specified. |
| 30 | S&F Joist, channel, angle, or tee sections etc. with Fe-290 (Gde E165) quality A complete all as specified. |
| 31 | S&F in repair barbed razor type concertina coil 9 SWG hot galvanised spring tensile wire of UTS 145 to 150 Newton per square mm zinc coating 250-300 grams per sqm dia of coil when unstretched 460 mm covering 8 to 10 running meter per coil and minimum weight of coil (GI strip) 1.625 kg per running metre hot dip galvanised razor ribbon tape of size 0.50 mm thickness, 19 mm wide before wrapping on central core wire fixed 1.66 mm thick GI clip minimum 25 nos per running metre and special nut bolt to hold two coils together and extra two rows parallel wire of 10 gauge complete all as specified and as directed . |
| 32 | S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails strain-ing bolts, including, tying at crossing with and provision of galvanised mild steel wire, staple or steel pins etc as directed by EIC (each line wire to be measured). |
| 33 | M&L two coats synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified. |
| 34 | Demolition of plain cement concrete in ground floors n. exc. 15 cm in thickness (below or above GL)unreinforced and removing debries out side of MoD land. |
| 35 | M&L for Chequered cement concrete coloured tiles with glossy finished 22-25mm (rubber form moulded) any size in floors etc, set, jointed & pointed with cement slurry complete all as specified. |
| 36 | M & L for screed bedding 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1: 6 even and fair complete all as specified . |
| 37 | M&L 75mm thick PCC 1:3:6 Type C1 (20mm graded aggregate) as in floor/ path/ Plinth protection including necessary form work, surfaces finished even and smooth without using extra cement. all as specified and directed. |
| 38 | M&L for 75mm thk cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in sub base for floors finishes all as specified. |
| 39 | M&L for sand filling under floor or in foundation including watering & consolidation complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F precast roubber moulded machine pressed PCC interlocking paver block rubber moulded of 60 mm thickness of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved complete all as specified and directed. |
| 41 | M& L for 80 mm thick machine pressed rubber moulded precast interlocking concrete paver block in any shape and size as approved confirming to IS 15658-2006 complete all as specified and as directed by Engineer-in-Charge. |
| 42 | M&L for cement concrete 1:2:4 type B-1(20mm graded aggregate), 40mm thick complete all as specified. |
| 43 | M&L Plain cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in coping/kerbs including necessary form work including weathering slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-charge. |
| 44 | Material and labour dismantling carefully servicable old precast PCC interlocking paver block cleaning with water stacking safely , removing sand bed and relaying in same position after improving PCC bed concrete complete all as specified and as directed. |
| 45 | Material and labour for preparation of new/previously untreated concrete surface including two coats of synthetic enamel paint over a coat of primer of precast kerb stone over 10cmgirth or width, not otherwise described and applying complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender