Tender For Misc B/R Reapirs To Paved Area, Kerb Stone, Stone Pitching And Plain Cement Concrete Flooring At Vsn Under Ge(Af) Chiloda
Tender Value
45 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gandhinagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Misc B/R Reapirs To Paved Area, Kerb Stone, Stone Pitching And Plain Cement Concrete Flooring At Vsn Under Ge(Af) Chiloda
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km complete all as specified and as directed. |
| 2 | M & L for Cement concrete 1:4:8 type D2 (40mm graded aggregate) in sub base complete all as specified. |
| 3 | M & L for 100 mm thick Cement concrete 1:4:8 type D2 (40mm graded aggregate) in sub base of hardstanding/ paver block/ checked tile/ stone slabe complete all as specified. |
| 4 | M & L for 100 mm thick cement concrete 1:2:4 type B-1 (20 mm graded aggregate) as in floor complete all as specified. |
| 5 | M & L for Hardcore of gauge n exc. 63 mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface with 8 to 10 ton roller compacted complete all as specified and directed by Engr in Charge |
| 6 | Dismentling of stone slabs and tiles laid bedded and pointed in any mortar of any description including removal of sand cushioning under paver block, complete all as specified and directed. |
| 7 | M & L for Machine pressed precast concrete interlocking paver block of approved shape without correctin factor for chamfering , made in rubber moulds with 0.5mm thick scratch proof lacquer coating on top surface , with white cement and pigment laid over , confirming to IS 15658-2006 complete all as specified and directed of size 60mm thickness, with minimum compressive strength of 35 N/Sqmm (M-35 Grade) complete all as specified. |
| 8 | M & L for Machine pressed precast concrete interlocking paver block of approved shape without correctin factor for chamfering , made in rubber moulds with 0.5mm thick scratch proof lacquer coating on top surface , with white cement and pigment laid over , confirming to IS 15658-2006 complete all as specified and directed of size 80mm thickness, with minimum compressive strength of 40 N/Sqmm (M-40 Grade) complete all as specified. |
| 9 | M&L for sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified and directed. |
| 10 | Refixing for Machine pressed precast concrete interlocking pave block and shape and size confirming to IS 15658-2006 of 60/ 80 mm thickness M-35 grade including leveing and spreading of sand cusion as laying in floor etc complete all as specified and as directed . |
| 11 | M&L for 25 mm to 30 mm thick factory made cement concrete chequered tiles of square shape in approved color and design (size,color & design as per directed by Engr-in -charge) laid on 15 mm thick cement mortar 1:4 including curing , finishing complete all as specified. |
| 12 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified. |
| 13 | M&L cement 1:3:6, type C1, using 20 mm aggregate providing, cement concrete in edges of path, rounded or chamfered on edges etc complete all as spd and directed. |
| 14 | M & L for preparation of new or previously untreated plaster/ concrete/Stone surface of any description over 10cm girth or width, not otherwise described & applying applying two coats of synthetic enamel paint over a coat primer, complete all as specified. |
| 15 | M & L for preparation of old painted plaster/ concrete/Stone surface of any description over 10 cm width or girth & applying applying one coat of synthetic enamel paint, complete all as specified and as directed |
| 16 | M&L for Granite slab/ (lakha red) 20 mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, platform,shelves,cooking platforms and like in cement mortar (1:4) including pointing in coloured cement (1:2) using marble dust with admixture of pigment to match with granite shade, laid over and including 15 mm thick cement screed bed in CM 1:6 complete all as specified. |
| 17 | Labour only for moulding to granite stone in to bracket straight or circle to facing of squared granite of any description ,complete all as specified. |
| 18 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish including rubbing and grinding complete all as specified. |
| 19 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment including 15 mm thick cement screed bed in CM 1:6 complete to match the shade of the slab including rubbing and polishing complete |
| 20 | M& L for glass mosaic tiles of approved shade having thickness 2 to 4 mm laid on floor or vertical surface. The tiles shall be fixed with suitable adhesive over prepared surface and joint filled with waterproof epoxy grout including demolition of existing tiles complete all as specified. |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. |
| 22 | S&F for Roof trusses (framed), trussed,purlins, rafter,crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, Fe 410-W (Gde-E-250) quality-A,etc complete all as specified. |
| 23 | S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted,bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A complete all as specified. |
| 24 | S&F only mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm and not exceeding 10cm long and dia of neck 11 to 15mm, all as specified and directed. |
| 25 | M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 grade-165. |
| 26 | S&F for mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, flat iron fillets (for securing wire mesh etc), wind ties etc including all necessary welding, drilling etc and similar works confirming to Fe-290 grade E-165 complete all as specified. |
| 27 | M&L PCC 1:3:6 type D2 using 40mm graded stone agg as in foundations, filling and mass-concrete complete all as specified. |
| 28 | Dismantling post or struts of steel or RCC of any section, including taking out embedded portion in concrete and making good the disturbed ground |
| 29 | Dismantling fencing wire mesh any type,complete all as specified. |
| 30 | Supply only chain link MS Galvanised fencing any size complete all as specified. |
| 31 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified. |
| 32 | S&F for GI chain link fencing with PVC coated 50mmx 50mm mesh including fixing of MS flat iron,MS bars & bolts to fencing posts all as specified. (Note: The supply only of MS flat iron, Rod & MS bolts shall be measured & paid under relevent item of Schedule) |
| 33 | Supply only mild steel flat iron, round bars etc. in available length complete conforming to Fe-290 (Gde E-165) complete all as specified. |
| 34 | S&F in repairs GI concertina coil of any size and dia (dia of coil when unstretched) and fixed on angle iron post/struts all as specified and directed. Note : Size and dia of coil and wire will be as per directed by Engr-in-charge. |
| 35 | S&F in repair Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bollts incl securing or tying at crossing with and provision of heavy duty galvanised mild steel wire, staples or staple pins etc as directed. (Each line wire to be measured) |
| 36 | Preparing new steel surfaces over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide. |
| 37 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width and grith and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 38 | S&F 2 mm thick fibre glass reinforced translucent corrugated/plain sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc all as specified & as directed including Dismantling of existing sheet.. |
| 39 | M&L for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550MPA as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismantling of existing Plain or corrugated sheet. complete all as specified. |
| 40 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge , fixed with self tapping screws as specified etc complete all as specified including Dismantling of existing Plain or corrugated sheet,complete all as specified |
| 41 | S&F for Naliya corrugated roofing sheet of approved quality and thickness on roof/ structure, including cutting to required size, proper placing, overlapping of sheet all as specified including Dismantling of existing Plain or corrugated sheet,complete all as specified |
| 42 | M&L for mangalore pattern clay roofing tile pattern on slooping roof/plain roof including underlay,ridge/hip tiles, fastening, cutting and finishing complete including demolition of existing tile complete all as specified |
| 43 | S&F for fixing of 10 mm thick polycarbonate sheet roofing over dome structure with aluminium strip , framing channels, self drilling screws, weather proof silicion sealant and rubber/ gasket tape of 3-6 mmthick for water tighting structure at the joints fixed on structural steel (mild steel ) framed structure complete all as specified |
| 44 | M&L for Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete including demolition of existing brick work complete all as specified |
| 45 | Taking down cement plaster in cement or cement lime mortar on brick or stone walls/ concrete wall etc. including raking out joints, hacking for key, scrubbing down with water etc, including removal of debries to a distance exc 1.5 Km but n. exc 2 Km. complete all as specified and as directed. |
| 46 | M&L for 15 mm thick rendering in cement mortar 1:4 by using manufacture/washed plaster sand on fair faces of brick work or concrete surfaces, including finishing even and smooth without using extra cement complete all as specified. |
| 47 | M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified. |
| 48 | M&L Preparation of old surface of wall shall include complete removal if required, brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm including filling up all cracks and defects with CM 1:3 complete all as specified. |
| 49 | S&F in repair for Aluminium Composite Panel of 3mm thick exterior grade in wall/column/ceilling with combination of aluminium skin material of 0.25mm thick (two or more metallic coloured coating sheet as directed) aluminium sheet of alloy grade 1100-H14 cover material, coated on external side with PVDF coating containing 70% resins for anti-fungal and anti bacterial properties and the center core shall be with natural polythelene (HDPE) bonded to the aluminium skin on both side and joint between ACP will be filled with silicon complete all as specified |
| 50 | S&F in repair of aluminium frame for ACP fixed on the wall/ Ceilling. Cladding panal to be fixed with rawl plug and SS screw all as approved on walls and roof including necessary accessories and joint filled with silicon , complete all as per manufacturer's instructions complete all as specified |
| 51 | Material and labour for polished plain acrylic sheet/ Stainless steel letters having thickness of upto 4mm use in Italian letters/normal letter of size upto 450mm long, 450mm width and 60mm thick with LED dotted lights, fixed with SS screw on ACP cladding/ on wall including dismentling of exixting letters all as specified and directed by Engr-in-Charge. |
| 52 | Demolition of reinforced cement concrete of any description and in any position ,complete all as specified. |
| 53 | M & L for precast concrete slab/cover, cover slabs (for man holes/ drain etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face using cement concrete 1:2:4 type B-1 using 20 mm graded aggregates set and jointed in CM 1:4 complete all as specified. |
| 54 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, TMT bars,etc complete all as spd and directed. |
| 55 | M&L for cement concrete Type B0 1:2:4 (12.5mm graded agregate) in coping supported on wall, complete all as specified. |
| 56 | Providing precast cement concrete type C0 1:3:6 (12.5 mm graded aggregate) louvres and jallies, 35mm thick including all mouldings set in cement mortar 1:4 including demolition of existing all as specified and directed. Note : cost of frame and formwork will be include in quated rate and coping above Jallies will be paid under seperate item. |
| 57 | M&L in repair for Boulder pitching grouted with cement mortar 1:6 packed tightly on plain/ slooping surface complete all as specified Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender