Tender For Repairs To Sea Side Security Fencing, Security Wall, Compound Walls, Gates, Boundary Wall Etc In The Area Of Age B/R -I At Naval Station Karanja
Tender Value
55 Lakhs
Estimated cost
Bid Submission
19 Sep 2026
10 days left
EMD
1.07 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Raigad → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Sea Side Security Fencing, Security Wall, Compound Walls, Gates, Boundary Wall Etc In The Area Of Age B/R -I At Naval Station Karanja
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE KARANJA NAME OF WORK : Repairs to sea side security fencing, security wall, compound walls, gates, boundary wall etc in the area of AGE B/R -I at Naval Station Karanja CONTRACT AGREEMENT: CWE KJ(K) - OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | Disamntling RCC post or struts any section , including taking out embedded portion and making good disturbed ground post embedded concrete including cleaning and cutting of grass,shurbs,bushes etc. |
| 3 | Dismantling fencing wire mesh, any type all as specified and directed. |
| 4 | S&F Galvanised PVC chain link fencing 80x80mm with PVC coated mesh made out of 3mm dia ms wire and 1mm thick PVC coating through out and fixed to post all as specified and directed. |
| 5 | All as item No 3 but except fencing |
| 6 | S&F Round bars 5 mm dia and over upto and including 10mm dia in stirupps spacers and binders, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking end and binding with and including MS wire annealed not less than 0.9 mm dia confirming Fe-410-W (Gde-E-250) quality-A or Fe 290 (Gde-E-165). |
| 7 | S & F Mild steel screw bolts 11 to 15 mm diameter of shank screw bolts (machine made) with hexagonal screw heads at one end & screwed the other or screwed both ends, each screwed endsto be fitted with washers & one hexagonal or square nuts, length of bolt exc 5cm but n exc 10 cm long complete all as specified and directed. |
| 8 | S&F Mild steel hand rails, half round or other steel section or core for hand-rail straight portion. Drilled and countersunk for balusters, running bars, for doors, balusters nosing to steps including in concrete and screwing etc. wind ties for roof including securing bolts: posts and struts in fencing including cutting tops to shape as directed, drilling, holes notching for wire, etc: flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165. |
| 9 | M&L PCC 1:3:6 type C2(40mm graded aggregate)as in foundation filling and mass concrete. |
| 10 | S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed fixed in repairs. |
| 11 | S&F in repair punched type concertina coil 600mm dia, as per IS 6745-1972, 3.0mm core wire heavy galvanised (confirming IS 280-2006 zinc coating 240 gms/sqm) with galvanised coating and punched type material as per IS deep drawn quality with galvanised coating having large barbs fixed in position and secured to fence posts/ Y-arm stretched to a length so as to achieve 600mm dia as in fencing including fixing with GI fastners such as J, C, U+- clips fixed at any height of security fence or wall complete all as specified and as directed by Engineer-in-Charge. |
| 12 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons, cills, dado, skirting etc. laid bedded & pointed in any mortar complete all as specified and as directed. |
| 13 | M&L Granite(of any type)tiles 20mm thick as in floors and similar works over 20mm thick cement screed in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone incl cutting, polishing complete. |
| 14 | M&L Granite(of any type)tiles 20mm thick as in skirting/dado and similar works over 10mm thick screed/backing coat in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match incl cutting, polishing complete. |
| 15 | M&L Rounding to edges of stone slabs on edge, such as in steps, cooking plaform, and other similar situations. |
| 16 | M&L Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment. |
| 17 | All as item No 15 except tiles. |
| 18 | M&L exterior grade fibre reinforced heavy duty cement concrete designer tiles 23+2mm thick layer colour pigment of size 300x300/400x400mm (samples approved by Engr-in-Charge) over and including 20mm thick screed bed in CM 1:3 complete all as specified and directed. |
| 19 | All as item No 17 except tiles |
| 20 | M&L Matt finish ceramic coloured elevation wall tiles in vertical surfaces 300x600x9-10mm thick set and jointed in cement slurry including rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 including dismantling of old tiles complete all as specified and directed by Engr-in-Charge. Note : Design/ pattern of tile should be approved by Engr-in-Charge. |
| 21 | M&L Sand filling under floors or in foundations incl watering and consolidation. |
| 22 | M&L Forming 12 mm thick Expansion joints filled with pre-formed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade 'A', as in 100 mm thikness of concrete slab. |
| 23 | M&L Forming Contraction(Dummy) joints 65 mm deep x 10 mm wide, filled with Grade 'A' sealing compound. |
| 24 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles. |
| 25 | M&L brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 completed all as specified and directed. |
| 26 | All as per item no 24 but except bircks |
| 27 | M&L Stone walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified. |
| 28 | All as item no 26 but except stone. |
| 29 | M&L extra over stone walling for hammer dressing to face stones and dressing of face beds and joints as specified of random rubble walling uncoarsed or brought upto courses hammer dressing sand stone with max depression on face from straight edge held against the dressed surface n exc 20mm all as specified. |
| 30 | Raking out joints/pointing to random or polygonal rubble, uncoarsed or brought upto courses in CM complete all as specified. |
| 31 | M&L for key pointing to random or polygonal rubble, uncoarsed or brought upto courses in CM 1:4 complete all as specified. |
| 32 | Demolition of precast concrete block walling build in Cement mortar. |
| 33 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 type C1, 1:3:6 using 20mm graded stone aggregate, complete all as specified. |
| 34 | All as item no 32 but except block. |
| 35 | M&L Cement concrete 1:2:4 type B1using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed . |
| 36 | Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water etc. |
| 37 | M&L 15 mm thick cement plaster in CM 1:4 on fair faces of brick work/concrete etc finished even and smooth without using extra cement complete all as specified. |
| 38 | M&L Preparation of newly plastered surfaces of walls and applying two coats cement base paint on walls |
| 39 | Material & Labour for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 40 | Material & Labour for preparation of old surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade. |
| 41 | M&L Preparation of old painted surfaces and applying one coat of cement base paint on walls. |
| 42 | M&L Preparation of old concrete/Asbestos/ Cement/Plaster surfaces over 10cm width or girth, not otherwise described and applying one coat of synthetic enamel paint. |
| 43 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. |
| 44 | M&L framed work as in doors or gates of angle or other section with gusset plates, braces etc complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hangidng or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-w(Gde-E-250 quality). |
| 45 | S&F Cast iron work Grade FG 150, articles n exc 5 kg each unmachined, in brackets, gully traps, grating, railing, frame, manhole covers, tanks cover, fire and soot doors, dampers, stop valves boxes, gate stops, parts of ranges, balusters and similar works |
| 46 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 47 | M&L Running welding in repairs thickness of metal to be welded exc 6mm but n exc 9mm all as specidied and directed |
| 48 | M&L for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer. |
| 49 | M&L for preparation of old steel and iron surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on steel surfaces complete all as specified and directed. |
| 50 | M&L for scrapping of old steel surfaces of sea side fencing post of ht appox 2.10m and girth 30 cm , not otherwise described and applying two coats of corossion resistance paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.Note : Contractor to ensure safety measures as the work is along the sea, the contractor to be arrange the proper ladder/scaffolding and all other safety equipments before start the work. |
| 51 | M&L for preparation of new steel surfaces of any description, not exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer. |
| 52 | Demolition and breaking up 300mm dia drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar. |
| 53 | M&L RCC Pipe 300mm bore class NP-2 laid & jointed complete with colloar all as directed and as specified. |
| 54 | M&L Concrete bed to drain pipes including packing under and completely surrounding pipes with concrete after they are laid and tested; in type C2 1:3:6 using 40 mm graded stone aggregate for 300 mm bore pipes complete all as specified and as directed. |
| 55 | M&L for precast moulded reinforced cement concrete factory made precast moulded and vibro compacted manhole covers with necessary handles of size 900X450X100 mm medium duty confirming to IS 12592 -2002 placed in position wherever required all as directed in taking down.Note: Manhole cover shall be of \\"BMC pattern\\" precast slab as in RMC M30 obtained from approved manufacturer as directed by GE. |
| 56 | Demolition of Cement Concrete (unreinforced) concrete in ground floors and pavings n exc 15 cm Thickness (below or above ground level) |
| 57 | M & L 100 mm thick PCC 1:2:4 Type B-2 (using 40 mm graded aggregate ) as in hard standing and similar works etc finished cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 58 | M & L PCC (1:3:6) type C-2 using 40mm graded agg as in 75mm thick as in plinth protection/footpath, finished even & smooth using extra cement complete all as specified and directed |
| 59 | M&L PCC 75mm thick 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base all as directed. |
| 60 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl nainital or similar pattern roof covering. |
| 61 | M&L Pre-painted galvalume alu zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 62 | M&L Pre-painted galvalume alu zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender