Tender for Providing of Perimeter Lights and Poles With Connected Items Along State Highway - 20 at mil stn Dhrangadhra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Sep 2026
9 days left
EMD
48000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surendranagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing of Perimeter Lights and Poles With Connected Items Along State Highway - 20 at mil stn Dhrangadhra
BOQ
| Sl. No. | Item Description |
| 1 | Excavation, in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr in depth for laying under ground cable in hard & dense soil and getting out complete all as specified & directed by Engr-in-Charge. |
| 2 | Excavation, in trenches not exceeding 1.5 mtr wide and exc 1.5 mtr in depth but n.exc 3.0 mtr for laying under ground cable in hard & dense soil and getting out complete all as specified & directed by Engr-in-Charge. |
| 3 | Returning, filling in, including spreading, leveling watering and well ramming in layers not exc 25 cm thick all as specified & directed by Engineer-in-Charge. |
| 4 | Removal of surplus excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed by Engineer-in-Charge. |
| 5 | M&L for sand cushioning to under ground cable with dry sand locally available 8cm thick before laying the cable and 15 cm above the cable, stretching and testing of cable complete all as specified & directed by Engineer-in-Charge. |
| 6 | Supply & laying sub class 'B' bricks for protection of cable and laid perpendicular to the trench all as specified & directed by Engineer-in-Charge. |
| 7 | Supply and laying of Steel tubing light grade galvanised of size 40mm dia laid in trench for protection of cable complete all as specified & directed. |
| 8 | Supply & Fixing 1.5 Sqmm (nominal area) 3 core, multi-stranded copper conductor, PVC insulated sheathed, FRLS cable drawn in steel pole for connection to street/flood light fitting and making connections complete all as specified and directed. |
| 9 | Supply and fix, New generation energy saving and environmental friendly long life LED street light 70Watts made up of pressure die cast aluminium housing with high efficiency LEDs as lighting source and lens embedded PC cover having top opening seperate driver compartment with IP66 protection and impact resistance of IK07 complete all as specified and as directed by Engr-in-charge. |
| 10 | Supply and fix street light cable junction boxes IP 65 with metric knockout for cable entry made out of SMC material, shock & dust proof of inside size 250x200x100 mm as per IS and including TPN (04 Nos) aluminium busbar fixed on insulators, 01 No 6A SP MCB with cable glands, earth termination with nuts & bolts, and including 02 sets of 25x6mm flat iron clamps with nuts, bolts and washers including 02 coats of aluminium paint over a coat of primer for flat iron all as specified and directed by Engineer in charge. Make : Sintex Cat Part No GSJB 2520 or equivalent in Hensel/Havells/C&S |
| 11 | M&L for Plain Cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in foundation filling for poles complete all as specified and directed. |
| 12 | M&L for Plain Cement concrete cast in situ 1:3:6 type C-I (using 20 mm graded crushed stone aggregate) for pole foundaton & coping, the top surface shall be smooth by using extra cement slurry including usage and wastage of form work all as specified and directed by Engineer in charge |
| 13 | Material and labour for steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-22 (8.5 metres long) including numbering of poles with aluminium paint and painting up to 1.5 meter above PCC benching of poles in black and white strips 3 number complete all as specified and as directed by Engr-in-Charge. (Excavation, earth work, foundation concrete and coping etc will be measured and paid separately). |
| 14 | Supply & fixing in repairs street light bracket fabricated from 40mm dia medium grade GI pipe bent to shape not exceeding 1.5mtr long alongwith 2 Nos clamps of size 32x6mm flat iron and including nuts, bolts, washers suitable for fixing on poles including 2 coat of synethic ename paint over a coat of red oxide primer complete all as specified and directed. |
| 15 | Supply, installing, testing and commissioning factory made and tested (including CPRI type test certified) outdoor LT feeder pillar box, compartment type, suitable brickwork or PCC plateform for mounting of panel, 415 volts, 3 phase, 4 wire, 50 HZ AC supply system having bus bar chamber with insulated aluminium bus bars of rating 100 amps rating installed on porcelain insulator. The panel shall be dust and vermin proof. IP-65 class protection and made of 3.15mm CRCA MS sheet and 40x40x6mm thick MS angle iron frame work, powder coated finish over one coat of red oxide primer on outside surface and painted inside with two coats of red oxide primer, front & back side opening type, with apron for cable entry with double door setter and locking arrangement (including provn of 65mm Godrej lock with two keys) internal wiring with PVC insulated solid, copper conductor FRLS cable, IS-694 marked, 1100 volts grade of appropriate size and comprising of the following :- (a) Incoming :- MCCB 4 pole 16 KA, 63 Amps capacity 415 V, 50 Hz, , AC supply, IS marked, complete with all standard accessories - 01 Nos(b) Outgoings :- (i) MCB 3 pole 16 KA, 63 Amps capacity- 02 Nos(ii) Digital multimeter with selector switch - 01 No(iii) Indicator lamp Red/Yellow/Blue - 03 Nos(v) Three CTs of ratio 300/5A class-1 burden 15VA- 01 Set(vi) Analog type timer switch 3 phase module type, 24 hrs program , programable 15 min, current capacity 32 Amps - 02 Nos(vii) Contactor 32 Amps 415 volt 50 Hz 3 pole - 02 Nos |
| 16 | Supply, laying in trenches or passing through pipes and testing cable XLPE Insualted screened PVC bedded, galvanised steel strip armored, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 Core complete all as specified and directed.Note-Excavation, earthwork, sand cushioning, GI pipe protection, cable cover shall be measured and paid separately. |
| 17 | Supply, laying in trenches or passing through pipes and testing cable XLPE Insualted screened PVC bedded, galvanised steel strip armored, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 4 Core complete all as specified and directed.Note-Excavation, earthwork, sand cushioning, GI pipe protection, cable cover shall be measured and paid separately. |
| 18 | Supply, laying in trenches or passing through pipes and testing cable XLPE Insualted screened PVC bedded, galvanised steel strip armored, electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 2 Core complete all as specified and directed.Note-Excavation, earthwork, sand cushioning, GI pipe protection, cable cover shall be measured and paid separately. |
| 19 | M&L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I connected to DB as earth lead all as specified and testing on completion including provision of earth lead protected by 40 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions:-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20 mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 40 mm bore light grade 7.5m. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender