Tender For Repairing Of Security Barrack At Neepco Vip Complex, Laitkor, Shillong.
Tender Value
3.47 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
15 days left
EMD
6900
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
East Khasi Hills → Meghalaya
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing Of Security Barrack At Neepco Vip Complex, Laitkor, Shillong.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking materials within 50 metres lead. |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkats, architrave, holdfasts etc. complete and stacking within 50 metres lead: a) Of area 3 sqm and below |
| 3 | Providing vitrified Antiskid Tiles of approved quality size, shape not less than 8 mm on floor, skirting over a cement mortar bed 15 mm thick of 1:3 (1 cement: 3 coarse sand) complete at all level as specified and directed. a) Normal range |
| 4 | Providing and laying vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS:15477, in average 6 mm thickness, including grouting of joints (payment for grouting of joints to be made separately). a) Normal range |
| 5 | Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90x45 mm having single rebate of 32x15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame with suitable wooden block in all the three legs. The frame shall be covered with fibre glass from all sides. M.S. stay shall be providedat the bottom to steady the frame. |
| 6 | Providing and fixing to existing door frames. A) 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fir-retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and sites, with wooden frame and suitable blocks of seasoned wood inside at equired places for fixing of fittings, cast monolithically with 5 mm thick FRP laminated for panels conforming to IS:14856, including fixing to frames. |
| 7 | Providing, fitting and fixing in position plywood partition walls with 6 mm thick plyboard with horizontal and vertical sal battens of size 50x80 mm spaced at not more than 1.20 m apart with necessary nails,wood screws, bolts,etc. complete as directed by the Department for all levels (Painting Varnishing to be measured and paid separately). a 6 mm thick Plyboard (i) On one face of the frames |
| 8 | Providing and fixing 25 mm thick shutters for cupboard etc: a) Panelled or panelled & glaazed shutters: (v) with 1st class Local wood including ISI marked anodised aluminium butt hinges with necessary screws. Pooma/Hollock/Gamari/ and the like |
| 9 | Providing and wood work in frames of doors, windows, clerestory window and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required diameter & length. With 1st Class Local wood Pooma/ Hollock/ Gamari/ and the like |
| 10 | Providing and fixing ISI marked flush door shutters conforming to IS:2202 (part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. A) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 11 | Applying priming coat: a) With ready mixed pink or Grey primer of approvedd brand and manufacture on wood work (hard and soft wood)/ with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood |
| 12 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications, including scaffolding: a) Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr/10 sqm |
| 13 | b) Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coats applied @ 0.90 ltr/10 sqm over an under coat of Primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture |
| 14 | c) painting steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer pplied @ 0.80 ltr/ 10 sqm of approved brand and manufacture |
| 15 | Providing and fixing aluminium tower bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete: b) 250x10 mm |
| 16 | c) 200x10 mm |
| 17 | e) 100 x 10 mm |
| 18 | Providing and fixing aluminium handles, ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade, with necessary screws etc.complete: a) 125 mm |
| 19 | b) 100 mm |
| 20 | c) 75 mm |
| 21 | Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100 mm sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: a) White Vitreous china Orissa pattern W.C.pan of size 580x440 mm with integral type foot rests |
| 22 | Providing and fixing controlled flush, low level cistern made of Vitreous China with all fittings complete: a) 10 lite (full flush) capacity- White |
| 23 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. A) Semi rigid pipe (i) 32 mm |
| 24 | Providing and fixing Chlorinated Poly vinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (i) 15 mm nominal outer diameter Pipes |
| 25 | Supplying fitting & fixing of water Heater (Geyser) of 1.5 kW/3kW with pressure release value including all necessary accessories as required (c) 25 litres capacity |
| 26 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer-in-Charge. |
| 27 | Providing and fixing wash basin with C.I. brackets, 15 mm dia. CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required |
| 28 | Providing and fixing brass bib cock of approved quality a ) 15 mm nominal bore |
| 29 | Providing and fixing unplasticised PVC connection pipe with brass unions: a) 30 cm length (i) 15 mm nominal bore |
| 30 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore |
| 31 | Providing and fixing 600x450 mm brvelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard bord ground fixed to wooden cleats with C.P. bras screws and washers complete. |
| 32 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.b) 600 mm |
| 33 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 15, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender