Tender for Providing of Common Toilet for Shopping Complex at k Sector Dolphin Hill Under ge (nb), Visakhapatnam.
Tender Value
40 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
16 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Visakhapatanam → Andhra Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing of Common Toilet for Shopping Complex at k Sector Dolphin Hill Under ge (nb), Visakhapatnam.
BOQ
| Sl. No. | Item Description |
| 1 | M&L for excavating in trenches in soft/loose soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified |
| 2 | M&L for PCC 1:4:8 , type D-2, using 40mm graded crushed stone aggregate as in foundation,filling and mass concrete commplete all as specified and directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed. |
| 4 | Removing excavated soils to a distance exceeding 1.5 KM but not exceeding 5 KM and depositing where directed. |
| 5 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, foundation for columns, etc complete all as specified and directed. |
| 6 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate as in columns,pillars etc complete all as specified and directed. |
| 7 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate as in lintels beams and roof beams etc complete all as specified and directed. |
| 8 | M&L for RCC M-30 (Design Mix) using 20mm graded stone aggregate as in chajjas complete all as specified and directed. |
| 9 | M&L for RCC M-30 (Design mix) using 20mm graded crushed stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and the like etc complete all as specified and directed. |
| 10 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for flat rough finished surface complete all as specified and directed. |
| 11 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for flat fair finished surface complete all as specified and directed. |
| 12 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, for flat fair finished surface complete all as specified and directed. |
| 13 | Use and waste of formwork to flat surfaces of chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed by Engineer-in-Charge. |
| 14 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves ,plinth beam including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 15 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide flat fair finished surface complete all as specified and directed. complete all as specified and directed. |
| 16 | S & F high strength corrosion resistant TMT steel bars,Grade Fe 500D, 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed. |
| 17 | S&F mild steel TMT bars ,Grade Fe 500D, 5mm dia and over upto and including 10 mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 18 | M&L for Brick work with subclass ‘B’ old size fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed . |
| 19 | M&L for Brick work with subclass ‘B’ old size fly ash bricks, straight or curved on plan exc 6m mean radius in half brick thick walls in, built in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 20 | M & L for rendering 15 mm thick in two coats (10mm+5mm each) on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with integral water proofing compound with weight of cement in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item). |
| 21 | M&L for 10 mm thick rendering in CM 1:6 on fair face of brick work finish the surface fair and even without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 22 | M & L for rendering 5 mm thick in Cement Mortar 1:3 on fair faces of concrete surface of ceiling surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | Supply only integral water proofing compound [ISI marked] of approved make. |
| 24 | M&L for preparation of new platered surface of wall and applying two coats of weather proof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre, dart pick up resistant,silicon enhanced,UV resistant and PU enhanced property over a coat of alkali resistant primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces including all necessary scaffolding,complete all as specified and directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 25 | M&L for preparation of new platered surface of wall and applying two coats of oil bound distemper over a coat of primer including applying one or more coat of wall care putty to a smooth surface including making good any undulations on the surfaces complete all as specified and as directed. Note :- Painting work shall be carried out acoording to Smart Painting procedure mentioned in PS |
| 26 | M & L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and directed. |
| 27 | M & L for preparing newly plastered surfaces of ceilings, etc and applying two coats of white wash complete all as specified and directed. |
| 28 | M & L for joint free glazed ceramic tiles, edge cut, coloured, premium quality, of size 300 mm X 450 mm, 7 to 8 mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed. |
| 29 | M & L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed to a true surface including watering complete all as specified and directed. |
| 30 | M & L for hardcore of gauge n.exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 31 | M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and directed. |
| 32 | M & L for 100mm thick plain cement concrete 1:4:8 type D- 2 using 40mm graded aggregate as in sub-base, floors and pavings etc complete all as specified and directed. |
| 33 | M & L for non skid ceramic tiles, joint free, light shade coloured, premium quality of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 complete all as specified and as directed. |
| 34 | M & L for non skid ceramic tiles, joint free, light shade coloured, premium quality of size exceeding 0.18 Sq.m and not exceeding 0.38 Sq.m, 7 to 8 mm thick [Square or Rectangular] as as in vertical surfaces such as Skirting/dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tile over backing coat of 10mm thick in cement mortar 1:3 complete all as specified and as directed. |
| 35 | M & L for granite stone slab (of any type) 18 to 20 mm thick (Table rubbed and polished to smooth mirror finish), machine cut, colour Mexican Red/Ruby Red/Z black/Paerl black etc design/pattern as directed including inlays, borders, margins in two or more colours/shades as in floors, trades of steps, cill cooking platform etc set and bedded over 15 mm thick screed bed in cement mortor 1:6 and jointed with grey cement slurry and pointed flush using polymer based cementitious tiling joint filler to match the shade of the Granite slabs& cutting, polishing complete all as specified and directed. (Note: Single stone slab shall be used for entire length/height of steps, jambs, pillars, window cills, cooking platform etc and joints shall match with the flooring complete) |
| 36 | Material and labour for preparation of horizontal or vertical surfaces for water proofing treatment on existing cleaned non accessible RCC roof with the following specification and manufacturings instruction complete all as specified and as directed:-(a) Preparing and cleaning of fully dry surfaces as per IS3067-1966(b) Applying bitumen primer(85/25 grade)conforming to IS:3384-1968 over the cleaned plaster surface @ 0.5 Ltr per sqm by the same membrane manufacturer of density at 25°C, 0.87 to 0.89 kg / Liter and viscosity 70-160 cps shall be applied on the prepared surface.(c) Applying a layer of APP based polymeric membrance 3.0mm thick (minimum) weight 3.6Kg per sqm (reinforced) with polyster Non woven fabric weighing not less than 160gms per sqm by torch application.The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction. (d) Applying one coat of aluminium paint @0.10 ltr per sqm over APP based polymeric membrane. |
| 37 | Material & labour for 25 mm thick cement concrete (1:2:4) type B-0 using 12.5 mm gaded stone aggregate laid on RCC roof slab to make surface levelled for proper slope finish the surface even and fair complete all as specified and as directed. |
| 38 | M & L for 10 mm thick, screed bed as in roof in cement mortar 1:3 finishing the surfaces even and smooth without using extra cement mixed with water proofing compound as per manufacturer's instructions complete all as specified and directed. (Note: WPC shall be measured and paid seperately) |
| 39 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full Body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm 2 , modules of elasticity 900 N/mm 2 and resistance to spread of flame of Class A category with water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 40 | S&F wood plastic composite (WPC) factory made door shutter of 30 mm thickness made out of single pieces extruded wpc (wood plastic composite) profile with homogenous fine cellular structure made with plastic and wood powder having solid structure which is eco friedndly with density not less than 650 kg/Cum,and UV digitally printed to the desired design with UV lacquer coated to give surface added strength and protectionand high grade uv resistance and with heat, fire retardant will be hung and screws withdrawl strength 1800 n(face) & 900 n (edge), minium compressive strength of 50n/mm2 , E=900 n/mm2 and resistance to spread of flame of class a category with property of being teRmite / borer proof water/ moisture proof and fire retardant and fixing with stainless stel butt hinges of required size with necessasry full body threaded star headed counter sunk s.s screw of size 10mm dia and 100 mm long , complete all as per direction of engg-in- charge. |
| 41 | S&F factory made uPVC white colour fixed window/ventilator made of extruded profiles with wall thickness of 2.3mm(+-0.2mm). Window profile with hollow section with multi chamber. Frame (60mm x 58mm). T profile Onevertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware, EPDM gasket.1.2 +–0.2mm thick, galvanized steel Frame (28mm x 21.5mm), T profile (27mm x 17 mrn) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners including stainless steel wire cloth ,0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless stell wire staple complete all as specified and as directed. |
| 42 | S&F 5.5 mm thick tinted/figured sheet glass,glazing with oil putty and glazing clips in metal/ wooden frame with second class hard wood beading/ aluminum beading in frames in squares exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 43 | S&F 125mm Butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 44 | S&F 200 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 45 | S&F 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed |
| 46 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, taple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete as specified and directed |
| 47 | S&F Door closer aluminum die cast body hydraullically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 48 | S & F Floor door stopper, 150 mm overall length of cover plate, brass body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 49 | S & F Vitreous China Rimless Single Piece WC with UF soft close slim seat cover, Hinges,fixing Accessories, dual flush fittings, Size: 360x655x765 mm, P Trap - 180 mm and all fittings and fixtures including connection to outgoing drain including making good damaged/disturbed surfaces complete all as specified and directed. Make: Jaquar Cat No. LYS-WHT-38851P180UFSM or equivelant model of make as per list of manufacturer mentioned in PS. |
| 50 | S & F 15 mm bore, Hand Shower (Health Faucet) with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook with all accessories complete all as specified and directed. Make: Jaquar Cat No. ALD-573 or equivelant model of make as per list of manufacturer mentioned in PS. |
| 51 | S&F Toilet paper holder with with flap recessed type, chromium plated fixed to wall with brass screw complete all as specified and directed Make: Jaquar Cat No. ACN-1153S or equivelant of make as per List of manufacturer's mentioned in PS. |
| 52 | S & F Vitreous China urinal, half stall type (Back or corner wall type) of size 710x480x300 mm, white (minimum) with grating and SS bottle trap(excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including brass stainless steel speader 15 mm bore complete complete as specified and directed. |
| 53 | S&F Frosted glass, 10 mm thick, curved shaped Urinal Partition combined with stainless (AISI 316L) accessories, mounted on wall or on supporting struts and the partition size H : 900mm, W : 450mm with chrome finish and With the colour option to apply digital graphic prints. The glass may be varnished from one side, frosted, clear, monochromatic or decorated with motif to create individual design of urinal slabs complete all as specified directed by Engineer in Charge.(Model No: Jaquar Cat Part No JSE-CHR-110UC450X or equivalent). |
| 54 | S&F vitreous China wash hand basin table top thin rim white coloured, rectangular shape, of size : 600x440x150 mm including cutting for and pinning in ends of brackets or making suitable size of hole for pillar tap in RCC slab and granite hole complete all as specified and directed Make: Jaquar Cat Part No KUS-WHT-35931PM or equivalent model of make as per list of manufacturer mentioned in PS. |
| 55 | S&F 15 mm bore fancy type pillar taps, long swan neck type with quarter turn, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed. Model No: Jaquar Cat Part No OPP-15001PM or equivalent model of make as per list of manufacturer mentioned in PS. |
| 56 | S&F 600 mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 57 | S & F 15mm bore, bib taps, 2 way, fancy type cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. CON-041KN or equivelant of make as per list of manufacturer) |
| 58 | S & F 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. (Make: Jaquar Cat No. CON-037KNor equivelant of make as per List of manufacturer's) |
| 59 | S & F 15 mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. (Make: Jaquar of make as per list of manufacturer) |
| 60 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 61 | S&F single towel rail 600mm long,stainless steel complete all as specified and directed. Make: Jaquar Cat No. ACN-1111SM or equivelant of make as per List of manufacturer's |
| 62 | S&F Towel Ring Round with Round Flange or square including Chromium plated brass screws and wooden/plastic cleats etc complete all as specified and directed. (Make: Jaquar Cat No. ACN-1121BN or equivelant of make as per list of manufacturer's) |
| 63 | S&F fancy type chromium plated soap dispenser with glass bottle complete all as specified and directed . Make: Jaquar Cat No.ACN-1135N or equivelant of make as per List of manufacturer's mentioned in PS. |
| 64 | S&F 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. |
| 65 | S&F 32mm dia flexible PVC waste pipe, 900mm long for wash basin/sink/urinal etc complete all as specified and directed. |
| 66 | Supply, laying, connection and testing in repair, 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 67 | Supply, laying, connection and testing in repair, 25 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 68 | Supply, laying, connection and testing in repair, 32 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 69 | S & F 75mm bore PVC [SWR] pipes single socketed, pressure rating 6kg/sqcm, type-A grade, in any length with solvent cement/ rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 70 | S & F 110mm bore PVC [SWR] pipes single socketed,pressure rating 6kg/sqcm, type-A grade , in any length with solvent cement/ rubber ring joints, fixed to walls with necessary brackets, clamps complete all as specified and as directed. |
| 71 | S & F 75mm bore PVC [SWR] pipes single socketed, pressure rating 6kg/sqcm, type-A grade, in any length with solvent cement/ rubber ring joints, fixed to walls with necessary brackets, clamps complete all as specified and as directed. |
| 72 | S & F 110mm bore PVC [SWR] pipes single socketed, pressure rating 6kg/sqcm, type-A grade, in any length with solvent cement/ rubber ring joints, laid in trenches or in floors complete all as specified and as directed. |
| 73 | S & F 75/100 mm bore, PVC (SWR) floor trap/Nahani Trap, with grating including jointing to waste pipe with solvent cement complete all as specified and directed. |
| 74 | S & F 75 mm bore, PVC (SWR) bends of any radius including jointing with solvent cement complete all as specified and directed. |
| 75 | S & F 110 mm bore, PVC (SWR) bends of any radius including jointing with solvent cement complete all as specified and directed. |
| 76 | S & F 75 mm bore, PVC (SWR) bends of any radius with access door including jointing with solvent cement complete all as specified and directed. |
| 77 | S & F 110 mm bore, PVC (SWR) bends of any radius with access door including jointing with solvent cement complete all as specified and directed. |
| 78 | S & F 75 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal including jointing with solvent cement complete all as specified and directed. |
| 79 | S & F 110 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal including jointing with solvent cement complete all as specified and directed. |
| 80 | S & F 110 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal with access door including jointing with solvent cement complete all as specified and directed. |
| 81 | S & F 75 mm bore, PVC (SWR) branch piece, single (single Y) equal or unequal with access door including jointing with solvent cement complete all as specified and directed. |
| 82 | S & F 75 mm bore, PVC (SWR) junction single, (Single T) equal or unequal including jointing with solvent cement complete all as specified and directed. |
| 83 | S & F 110mm bore, PVC (SWR) junction single, (Single T) equal or unequal including jointing with solvent cement complete all as specified and directed. |
| 84 | S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal including jointing with solvent cement complete all as specified and directed. |
| 85 | S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal including jointing with solvent cement complete all as specified and directed. |
| 86 | S & F 1000 litres capacity rotational moulded polyethylene water storage tank, double layer construction, ISI mark (cylindrical vertical with closed top) hoisted and fixed in position with and including 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long, 25 mm dia tank nipple ,hoisted and fixed in position complete all as specified and directed. |
| 87 | S & F ball valves 25 mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms ) complete all as specified and directed. |
| 88 | S & F 20 mm bore, gun metal, globe or Gate valves with iron wheel head, Class-I, Pressure Tested of 1.5 Mpa, screwed both ends for iron pipe complete all as specified and directed. |
| 89 | M & L for pre construction Antitermite treatment Treatment of soil along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed |
| 90 | M/L for pre construction anti termite treatment of soil under floors using chemical emulsion @ 1 Ltr per hole, 300mm apart including drilling and plugging 12 mm dia holes with CM 1:2 to match the existing floor. |
| 91 | Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 92 | M & L for hardcore of gauge n.exc 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 93 | M & L for 100 mm thick, plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub-base of flooring, etc complete all as specified and directed. |
| 94 | M & L for Sand filling under floors or in foundations including spreading, levelling, watering and consolidation complete all as specified and directed. |
| 95 | M & L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed. |
| 96 | M&L for cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed. |
| 97 | M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as inin surface channels and drains complete all as specified and directed. |
| 98 | Extra for forming fair finished to concrete surface of drain 30cm inner girth in cement including forms, mould, mitred/stopped etc complete all as specified and as directed. |
| 99 | M & L for Precast Reinforced Cement Concrete 1:2:4, type B-1 (using 20 mm graded stone aggregate) as in cover slab (For manhole etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar 1:4 including necessary form, moulds, etc complete all as specified and directed by the Engr-in-Charge. (Note : Reinforcement shall be measured and paid separately) |
| 100 | S&F Reinforced concrete pipes, class NP2, 150 mm bore, laid and jointed with collars complete all as specified and as directed. |
| 101 | M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggragate) as in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore RCC drain pipes complete all as specified and directed |
| 102 | M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm bore of pipe complete all as specifieed and directed. Please Enable Macros to View BoQ information |
| 103 | M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150 mm bore of pipe complete all as specifieed and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender