Tender For Repairs To Joinery, Plastering, Leakage/Seepage, Flooring And Sanitary Fittings Of Md Accn Of Para Sf, Adv Fd Hosp, Fd Hosp And Lt Regt At Basant Enclave Under Ge Missamari
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Sep 2026
9 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repairs To Joinery, Plastering, Leakage/Seepage, Flooring And Sanitary Fittings Of Md Accn Of Para Sf, Adv Fd Hosp, Fd Hosp And Lt Regt At Basant Enclave Under Ge Missamari
BOQ
| Sl. No. | Item Description |
| 1 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames)complete all as specified and as directed. |
| 2 | Taking down Chowkhats or frames exc 1.5 sqm and not 4.00 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 3 | S&F Pressed steel frames for doors with one or more rebates,1.25mm thk cold rolled mild steel sheet, size of frame 125 x 60mm including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and as directed. |
| 4 | S&F Pressed steel frames for doors with one or more rebates,1.25mm thk cold rolled mild steel sheet, size of frame 105 x 60mm including necessary fixing lugs, hinges, lock strike plate,etc., complete all as specified and as directed. |
| 5 | S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 6 | S&F 25mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 7 | S&F 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc, (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.24(a), complete all as specified and as directed. |
| 8 | S&F for solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube in opening as per specification & as directed. |
| 9 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes far top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Paneling of plain colour PVC sheets to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as specified in SSR Part I, Section 8 complete all as specified and as directed. |
| 10 | S&F powder coated (minimum thickness of poweder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 11 | S&F Powder coated Anodised aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified.Note:-(i)Glass/wire guage/Particle board as required shall be measured and paid seperately under appropiate item(ii) Design/pattern, profile sizes and other dimensions shall be of standard sizes and as directed |
| 12 | S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165, including necessary prepration of surface and applying a coat of red oxide zinc chrome primer and dismantling of mild steel work of any description complete all as specified and directed. |
| 13 | S&F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sqm in each pane, complete all as specified and as directed. |
| 14 | S & F 4 mm thick Sheet glass, frosted one side ordinary quality and glazing with wooden beads in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed. |
| 15 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with Aluminum frame work complete all as specified and directed. |
| 16 | S&F in repair, 18/19mm thick Prelaminated particle board, interior grade, prelaminated particle board, prelaminated both sides with decorative choice laminations, fixed with screws to timber frame work, fixed with screws to timber frame work complete all directed. |
| 17 | S&F 100 mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 18 | M&L providing plain cement concrete type C-1, (1:3:6), (using 20 mm graded stone aggregate), as in fixing of hold fast, back filling of pressed steel door frame including necessary form work as required complete all as specified and directed. |
| 19 | S&F mild steel hold fasts; for securing chowkhats and similar small articles conforming to Fe-290 Gde-E-165 incuding treating hold fast with tar or coal tar black paint, sanding complete all as specified and as directed. |
| 20 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 21 | S&F 150 mm Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 22 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section, complete all as specified and directed. |
| 23 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 24 | S&F in repair, Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and directed. |
| 25 | S&F in repair 10 ltrs capacity low level valve less PVC syphonic action type flushing cistern white with in let ball valve float and handle, PVC flush pipe, complete all as specified and as directed. |
| 26 | S&F in repair, Vitreous China wash down water closet pan, pedestal pattern white (excluding fixing bolts, flushing cistern and flush pipe) including Plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. |
| 27 | S&F vitreous China wash basin, white, flat back, size 550x400mm including brackets cutting for and pinning in ends of brackets or erecting stand, and 32 mm bore Waste coupling of PTMT (half or full hreaded) (Minimum weight 32mm-45gms) complete all as specified and as directed. |
| 28 | S&F in repair, health faucet with 15mm dia, 1.25 meter long easy flexible tube in chrome finish & wall hook all as specified and as directed |
| 29 | S&F PVC connection 15mm size with PTMT nuts, 600mm long complete all as specified and as directed. |
| 30 | S&F in repair, Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed. |
| 31 | S&F in repair, 600x450mm bevelled edge mirror of selcted quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified complete all as specified and as directed. |
| 32 | S&F in repair, Stainless Steel Sink with Drainage Board 1.0mm thick for Kitchen with Plugs, Washers, Waste Fitting 32mm bore of Brass CP, including a Pair of Cast Iron Brackets duly Painted including cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3, overall size 915mm x 460mm Bowl size 410 mmx330 mm x160mm complete all as specified and directed. |
| 33 | S&F in repair, 0.63mm thick stainless steel Kitchen rack, overall size 1050mm x 750mm x 250mm complete all as directed. |
| 34 | S&F in repair,15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 35 | S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed. |
| 36 | S&F in repair 15mm bore pillar taps, cast copper alloy with capston heads, chromium plated, fancy type, screwed down high pressure, with or without lettered hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed. |
| 37 | S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 38 | M&L 75mm dia. of outlet PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and as directed. |
| 39 | Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 40 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/Ceilings complete all as specified and as directed. |
| 41 | S&F in repair, 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/Ceilings complete all as specified and as directed. |
| 42 | S&F 110 mm bore PVC (SWR) bends of any radius,complete all as specified and directed. |
| 43 | S & F 75 mm bore PVC (SWR) bends of any radius,complete all as specified and directed. |
| 44 | S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door, complete all as specified and directed. |
| 45 | S&F 110 mm bore PVC (SWR) Vent Cowl,complete all as specified and directed. |
| 46 | Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in floors fixed to walls and ceilings or laid in floors, including taking out old unserviceable 15mm bore GI pipe complete all as specified and as directed. |
| 47 | Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in floors fixed to walls and ceilings or laid in floors including taking out old unserviceable 20mm bore GI pipe complete all as specified and as directed. |
| 48 | Supplying and laying of 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings laid in floors fixed to walls and ceilings or laid in floors including taking out old unserviceable 25mm bore GI pipe complete all as specified and as directed. |
| 49 | S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed,complete all as specified and as directed. |
| 50 | M&L Glazed ceramic coloured tiles in vertical surfaces 600 x 300 x 7 mm thick set and jointed in cementitious tile adhesive & pointed in white or colour cement to match including backing coat 10 mm thick in Cement Mortar 1:4, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debries/ rubbish from the defence land complete all as specified and directed. |
| 51 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) of size 300 x 300mm in floors etc. set and jointed in cementitious tile adhesive and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debries/ rubbish from the defence land complete all as specified and directed. |
| 52 | M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) of size 600mm x 600mm, in floors etc. set and jointed in cementitious tile adhesive and pointed in white or coloured including 15 mm thick Screed bed or bedding layer of cement mortar 1:6, for laying floor finishes, including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debries/ rubbish from the defence land complete all as specified and directed. |
| 53 | M&L Granite (of any type) tiles 18-20mm thick machine cut, as in floor laid bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including including 20 mm thick Screed bed or bedding layer of cement mortar 1:6, ncluding neccessary Dismantling existing unserviceable Stone slabs and tiles of any description or thickness. laid bedded and pointed in any mortar complete all as specified and as directed |
| 54 | Demolition of cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing debries of the premises complete all as specified and directed. |
| 55 | M&L 75mm thick cement concrete (1:3:6) type C-2( using 40mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and as directed. |
| 56 | M&L Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:3 for finished even and fair and including water proofing compound as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed.Note : Water Proofing Compound will be measured separately. |
| 57 | M&L for applying two coats of PU based liquid single component elastomeric water proofing menbrane on sunken slab complete all as specified and as directed. |
| 58 | M&L for plain cement concrete (1:5:10) type E2 using (40mm graded granite stone aggregate) in foundations, filling and mass concrete inluding demolition of old cement concrete, complete all as specified and directed. |
| 59 | S&F, in repair Anodised aluminium snap grid frame work for false ceiling Size of grid 605 x 605mm, Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework with screws all as specified complete complete all as specified and directed. |
| 60 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc,complete all as specified and directed. |
| 61 | M&L for brick work with sub class B bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius, including demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish from the site complete all as specified and as directed. |
| 62 | M&L 15mm thick plaster of cement mortar (1:4) rendering on brick work or concrete surfaces of sunken slab mixed with and including water proofing compound as per manufacturer's instructions finishing the surface fair and even without using extra cement complete all as specified and as directed. |
| 63 | M&L preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed. |
| 64 | M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth, without using extra cement, complete all as specified and directed. |
| 65 | M&L for preparation of new wall surface applying Two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specificationover new surface over 1 mm thick wall care putty,complete all as specified and directed. |
| 66 | M&L rendering 5 mm thick on ceiling or concrete Surfaces in cement mortar 1:3 finished even and smooth. (without using extra cement), complete all as specified and directed. |
| 67 | Preparation of new surfaces of ceilings by brooming down or by steel wire brushing and applying three coats of white wash, complete all as specified and directed. |
| 68 | Supply only integral water proofing compound |
| 69 | M&L preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. |
| 70 | M&L Preparation of new or previously untreated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling applying two coat of synthetic enamel paint over one coat of pink primer,complete all as specified and directed. |
| 71 | M&L for complete removal of existing finishes,preparation of old wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm complete all as specified and directed. |
| 72 | M&L for complete removal of existing finishes preparation of old wall surface applying Two or more coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour,over 1 mm thick wall care putty,complete all as per manufacturer's specification complete all as specified and directed. |
| 73 | M&L preperation of old surfaces of ceilings and applying one coat of white wash,complete all as specified and as directed |
| 74 | M&L preperation of old surfaces of wall and applying one coat of white wash complete all as specified and directed |
| 75 | Removing existing unserviceable roof treatment, APP membrane, beading layer & cleaning of surfaces of roof, picking, sweeping, cleaning with clean water and dired, complete all as specified and directed.Note : (a) Work shall be carried out through specialized applicator approvrd by GE. Contractor shall submit sufficent documents/Credentials in support of Applicator whom he wants the work excuted.(b) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions. (c) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction. |
| 76 | M&L 25mm thick cement concrete (1:2:4) type B-1( using 20mm graded crushed stone aggregate) as in sub base of floor finished even and fair complete all as specified and directed. |
| 77 | M&L for water proofing treatment to RCC roof slab, including parapet comprising with the following course of treatment/specification from bottom to top, including removing of old unserviceable roof treatment complete all as specified and directed:-(i) Cleaning of old concrete surfaces of roof, picking sweeping cleaning the surface to remove all loose dust and thoroughly washing down with clean water and dried complete by mechanical grinding of the surfaces.(ii) Rendering 10mm thick in CM (1:4) mixed with and including water proofing compound as per manufacture instruction on existing roof surface true to level after applying cement slurry @ 3Kg/Sqm over RCC slab when concrete is green.(iii) Applying one coat of solvent free epoxy primer 200gm/sqm in two coats(iv) Applying high build single component polyurethane water proofing coating @ 1.8 Kg/Sqm in two coats or more coats.Note : (a) Work shall be carried out through specialized applicator approved by GE. Contractor shall submit sufficent documents/Credentials in support of Applicator whom he wants the work excuted and guarantee money towards roof treatment as specified in special condition shall be returned from bill for the period of ten years from certified date of completion. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender