Tender For External Periodical Services And Allied B/R Works At Rashi Area At New Navy Nagar Under Age B/R -Ii, Navy Nagar Of Ge (Nw) Navy Nagar, Colaba, Mumbai.
Tender Value
45 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
13 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For External Periodical Services And Allied B/R Works At Rashi Area At New Navy Nagar Under Age B/R -Ii, Navy Nagar Of Ge (Nw) Navy Nagar, Colaba, Mumbai.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water etc and removing debrish from site complete all as specified. |
| 2 | Chipping ,removing carefully old broken concrete work by low impact hammer ,breaker without damaging the structure & cleaning and disposal of debris out side the premises etc. complete as directed by Engr-in-Charge. Hard concrete should not be removed by force . |
| 3 | M&L for applying the rust remover alkaline in natrue having specific gravity of 1.1 kg/ltr to the existing/additional rebars including wire brushing manually or by mechanical tools, after cleaning the disturbed surface etc. complete by draining water. Rust remover shall be procured from one of manufacturer given below. |
| 4 | M&L for applying two coats of anti-rust protective coating in the form of Acrylic Polymer with a minimum solid content to 40% solids mixed with cement in 1:1.5 proportion (1 part polymer and 1.5 parts cement) on rebars after cleaning of rust scales as per manufacturer's instruction. Anti-rust protective shall be procured from one of manufacturer given below. |
| 5 | M & L for Mild steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified. |
| 6 | M & L for providing bonding coat of SBR polymer over the exposed steel/welded mesh/concrete in ratio 1:1 to 1:1.5 of polymer and cement complete as directed by the consultant. SBR polymer to be procured from one of the manufacturer's given below. |
| 7 | M&L for repairing the damaged concrete portion by SBR Polymer with a minimum solid content to 40% cement mortar in proportion 1:5:15 i.e. (1 part SBR polymer : 5 parts OPC cement and and 15 parts of graded quartz aggregate (sand) upto 25mm thickness as directed by the manufacturer's instruction including necessary curing etc. complete all as specified & as directed.SBR polymer shall be procured from one of manufacturer given below. |
| 8 | Rebuilding the section of damaged RCC elements to required size avg thicknes 50 mm by providing and casting with microconcrete of grade M-30 and above including providing and fixing of watertight shuttering of minimun 12 mm th. with supporting framework,all lead lift, mixing, placing, deshuttering, levelling the surface by grinding off cementitious slurry or construction joint differences if any to satisfaction of Engr -in- charge, etc. complete Name of Manufacturer: BASF/Fosroc/Sika/ Dr Fixit |
| 9 | M&L for 20 mm thick plastering in two coats 15 mm thick backing coat in CM 1:6 and 5 mm thick setting coat in CM 1:4 mixed with water proofing compound @ 2% by weight of cement on fair faces of brick work or concrete wall surfaces finished even and smooth without using extra cement including providing bird wired mesh/wired fabric (12.5mm x 24 SWG) in strips of 200 mm width or as required over junctions of concrete & brick / block masonry or any other specified location at all heights including minimum 100mm overlap at all joints / junction prior to plastering, drilling, nailing etc. complete as directed By Engineer In Charge including scaffolding, Safety net etc all complete as directed by Engr-in-Charge. (Note :- WPC shall be measured and paid separately) |
| 10 | Supply only integral water proofing compound of approved ISI make. |
| 11 | M&L for applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-charge. |
| 12 | M&L for applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over old surfaces after prepration including washing down complete all as specified and directed by Engr-in-charge. |
| 13 | M&L for applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces after complete removal of existing surface complete all as specified and directed by Engr-in-charge. |
| 14 | M&L applying one coat of oil bound distemper on old decorated surfaces of wall and filling the surface inperfections such as holes, dirt, fine cracks including preparation of surface complete all as specified. |
| 15 | M&L for Preparation of old painted surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by EIC. |
| 16 | M&L for Preparation of old painted surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of antirush paint/red oxide primer, complete all as specified and as directed by EIC. |
| 17 | M & L for preparation of walls & applying two coats of chemical waterproofing treatment(601 raincoat of Pidilite or Dr.fixit or equivalent) of approved colour on wall such as Flexcoat, Beckcoat Exshield etc or equivalent over a coat of primeseal/primers complete as per manufactures Instructions, all as directed. |
| 18 | M&L for writing letter or figures size as per existing numbering of the building (Block, Roman, Italic or Indian) all as specified and directed by Engr in Charge. |
| 19 | Material and labour for one coat water based premium acrylic emuilsion floor guard paint of approved colour. Ensure that the surface to be painted is free from any damp, loose paint, dust, wax or grease and other components. Remove all contaminants such as dirt, grease, oil, dust etc. with soap powder solution using a scrubbing brush complete all as specified and directed. |
| 20 | M&L for taking out/removing all plants/vegitation growth or shrubs from shaft area, walls, chajjas and injecting chemical GLYPHOSPHATE 41% SL 20 ML or till refusal by making cut/injection in the stem of plants 30 mm c/c and spraying with solution (25 ml GLYPHOSPHATE 41% diluted with one lit of water) and removing the plants/vegitation growth completely dead, including necessary scaffolding, julas etc complete as per manufacturer of chemical Biostadtlndia Ltd or equivelent approved by GE. (Note:- For item No 1 to 20 Work to be carried out at G+14 bldg including parapet and shaft walls with scaffolding & safety measures in repairs and in patches). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysSep 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender