Tender For Providing Of Awning Over Exiting Path From Road To Office Accn Of Bldg No P-1 & P-11 And Addn/Altn To Dvrs Rest Room, Special Repairs To Floor & Gates In Mt Area, Special Repairs To Covered Stair Case From C Division (Akbar Block) To Kattabomma
Tender Value
46.50 Lakhs
Estimated cost
Bid Submission
12 Sep 2026
0 days left
EMD
93000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nilgiris → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Awning Over Exiting Path From Road To Office Accn Of Bldg No P-1 & P-11 And Addn/Altn To Dvrs Rest Room, Special Repairs To Floor & Gates In Mt Area, Special Repairs To Covered Stair Case From C Division (Akbar Block) To Kattabomman Tea Room And Certain Minor Works At Dssc Wellington
BOQ
| Sl. No. | Item Description |
| 1 | PROVN OF AWNING OVER EXITING PATH FROM ROAD TO OFFICE ACCN OF BLDG NO P-1 & P-11 AND ADDN/ALTN TO DVRS REST ROOM OF MT OF GE DSSC WELLINGTON |
| 2 | Demolition of cement concrete (unreinforced ) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing debris off the site complete all as specified and as directed. |
| 3 | Dismantling of floor hearth or wall tiling including cement mortor bedding(but not backing)removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 4 | M&L for Coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 5 | M&L for Coloured non skid ceramic tiles7 to 8 mm thick (square/rectangle) area of each tile exc 0.06sqm but not exc 0.11 sqm, in floors and etc set and jointed in neat cement slurry and pointed in white or coloured cement to match vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified and directed. |
| 6 | M&L for coloured glazed ceramic tiles of size 350x250x7mm / 450x350x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified and directed. |
| 7 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and directed. |
| 8 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and directed. |
| 9 | Taking down Shutters of any descriptionexc 1 sq. m but n.exc 2 Sqm each complete all as specified and directed. |
| 10 | S&F Pressed steel frames of 1mm thick factory made of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed. |
| 11 | Supply and fix factory made 35mm thick flush door shutters, solid core construction, with block board core and plywood face panels, commercial type Decorative face veneer on both sides with lipping to match with frame and fitted to chowkats etc., complete all as specified and as directed. |
| 12 | M&L for 2nd class hard wood (Sal / Hollock) factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed. |
| 13 | Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing & edges will be painted to match with printed sheet complete all as specified and directed. |
| 14 | Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm(90 degree) used instead of exposed portion of PVC sheet beading., and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 15 | M&L PCC type B-0 (1:3:6) using (12.5mm graded aggregate) as in filling of steel chowkats or frames complete all as specified and as directed.. |
| 16 | S&F Mild steel butt hinges 100mm long, medium weight, cold rolled complete all as specified and directed. |
| 17 | S&F 150mm, extruded aluminium alloy handles, fabricated type, anodisedcomplete all as specified and directed. |
| 18 | S&F 150 mm long, Aluminum anodised barrel tower bolts, of extruded section complete all as specified and directed. |
| 19 | S&F 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. |
| 20 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 21 | M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 22 | S&F Factory made UPVC Colour sliding windows with glazing all as per manufacturer's direction and following specifications :- (i) Window panel shall be 3 track frame with upvc profile section of size 112mm x 60mm having outer wall thickness of 2mm(+/- 0.3mm ) with sliding pattern with glazed and mesh shutter including 5.5mm thick Glass.(ii) window glass shutter for (front panel )shall be made of 66mmx 42.5mm having outer wall thickness of 2.0mm(+/- 0.3mm) .(iii) Window mesh shutter shall be made of 52mm x 22mm.Gauge shall be suiable wire gauge SS304 coated/fiber black mesh. (iv) All profile of frames and sash shall be reinforced with galvanised miuld steel section of 1mm wall thickness at wherever reauired.(v) All the corners and joints of the frame shall be mitred cut & fusion welded without any mechanicasl joints.All welded joints are to be neatly trimmed & features grooved /raised nib finish so as to make nthe finished products free from all sharp edges & burrs.(vi) The lock shall be single point topuch lock.All hardware like wheel,lock should be screwed .System shall be provided with suitable upVC beading size of 25mm x15.5mm for glazing of size 4mm/5mm pinhead /plain glass as directed by the Engineer In charge. (vii) The profiles shall be cut to lenth and welded 45 degrees .(iii) The complete window shall be fixed into the prefinished opened placec by drilling & fixing thorugh the outer frame using high quality fasteners & silicon sealent is applied to fill up the gap between wall & window frame for leak proof installation and completion. Note: The entire fixing will be done as per manufactures instructions and specification and as directed by Engg in charge. (II) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose. |
| 23 | Supply and fix UPVC ventilator with following profile :- UPVC ventilator frame will be of overall size 60x58 mm with wall thickness 2.7 + or - 0.2 mm extruded sections including 5.5mm thick Glass. The corners will be plastic welded.The hinge side vertical outer frame shall be reinforced with galvanized channel of wall thickness 1.2 mm. The ventilator will be fixed to walls using 8 mm dia 80 mm dia MS screws minimium 2 nos on each sicde. The 3 nos of pinned glass will be placed in slots provided in ventilator. Glazing: The ventilator will be glazed with 5 mm thick pinhead glass. Note: The entire fixing will be done as per manufactures instructions and specification and as directed. (II) The unit rate quoted by contractor includes cost of glass/wire netting and all other connected accessories. Net opening will be measured for payment purpose. |
| 24 | S&F 9/10mm thick PVC ceiling/wall panels of interlocking types, width 250/255 mm with lamination design and exc 60% of PVC content including necessary H-joints, internal/external corner trim, coner cove,F/J edge trims where required fixed with hidden screws to steel/wooden frame work complete all as specified and as directed. |
| 25 | Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar complete all as specified and directed. |
| 26 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 27 | Demolition of cement concrete (reinforced) of any decscription and in any position not otherwise specifically provided for complete all as specified and directed. |
| 28 | Providing precast cement concrete solid building blocks or slabs 10cm thick type C-1, 1:3:6 using 20mm graded stone aggregate and setting in mortar,(1:4) complete, in walls complete all as specified and as directed. |
| 29 | M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks exc 10cm width and setting in mortar(1:6) complete all as specified and as directed. |
| 30 | Excavating in trenches, n.exc 1.5m wide and n exc 1.5 in depth; for foundation getting out hard/dense soil complete all as specified and as directed. |
| 31 | Material and labour for providing plain cement concrete 1:3:6 type C2, using( 40mm graded stone aggregate )as in foundation filling and mass concrete for all as specified and as directed. |
| 32 | M&L for Reinforced cement concrete (nominal mix) type B- 1(1:2:4) using 20mm graded stone aggregate as in Beams, cantilevers,band , bressummers,lintels over 1.5m span etc complete all as specified and as directed. |
| 33 | M&L for RCC Type B1-1:2:4 (using 20mm graded aggregate )as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 34 | M&L for Precast RCC in type B1, 1:2:4, using 20mm graded stone aggregate, for landings, coverslabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain face with plain faces including setting in CM 1:6 complete all as specified and as directed. |
| 35 | M&L Formwork to sides and soffits flat rough finished concrete surface of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves,kitchen platform,foundation for post etc complete all as specified and as directed. |
| 36 | S&F TMT bars Mild steel bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 37 | All as item No 35 above but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 38 | M&L 15mm thick rendering plaster on fair face of brick-work or concrete surface incl finish the surface even and smooth without using extra cement in CM 1:6 complete all as specified and as directed . |
| 39 | M&L 15mm thick rendering plaster brick or concrete surface incl finish the surface even and smooth without using extra cement in CM 1:4 including adding water proofing compound as per manufactures instruction complete all as specified and as directed . Note : WPC will measured and paid separatly |
| 40 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 41 | M & L for mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed. |
| 42 | M&L for framed work such as grills, gratings,flat iron for fencing post etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 43 | M&L preparing new surface of steel over 10 cm girth or width and appling two coats of synthetic enamel paint over a coat of primer red oxide complete all as specified and as directed. |
| 44 | Excavation in post holes (or similar holes) each not exc 0.5 Cum and getting out, returning filling in and ramming earth or borken rubble mixed with earth around in layers not exc 25cm watering and removing surplus spoil to a distance not exc 50m and making good surface in soft/loose soil all as specified and directed. |
| 45 | M&L for providing cement concrete1:3:6, type C2, using 40mm aggregate, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts bases etc complete all as specified and as directed. |
| 46 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 47 | S & F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 48 | S & F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and as directed. |
| 49 | M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 50 | M&L for approved earth filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 51 | M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed. |
| 52 | M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in floors, sub base, plinth protection etc. finished even & fair without using extra cement complete as specified and as directed. |
| 53 | M&L Chequered cement concrete coloured tiles 300mm x 300mm and 22-25 mm thick set jointed in neat cement slurry in floors with grey cement & pigment including 20 mm thick screed bed in CM 1:4 complete all as specified and directed |
| 54 | M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surface even and rough to receive the top finish complete all as specified and as directed. |
| 55 | M&L for Providing precast cement concrete louvres and jallies,25mm thick type C-0(1:3:6) using 12.5mm grade stone aggregate including all mouldings and set in CM(1:6) complete all as specified and as directed. |
| 56 | Taking down steel tubing and connections of 15 mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 57 | Taking down steel tubing and connections of 20 mm bore including cleaning for refixing or removal to store complete all as specified and as directed. |
| 58 | Supplying and laying of 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 59 | Supplying and laying of 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. |
| 60 | Dismantling existing tanks exc. 500 lit & n. exc. 1000 litres capacity, removing off the site complete all as specified and as directed. |
| 61 | Supply and Fix, 1000 litres capacity triple layered Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed. |
| 62 | Meterial and labour for Providing, cement concrete type B-0 ,1;2:4 using 12.5mm graded stone aggregate in roof kerbs ,koving for chajja or mud stops, rounded or chamfered on edges etc complete all as specified and as directed. |
| 63 | S&F and in repair Ball valves 25 m,m dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . /25mm-455gms/ 40mm - 690 gms) complete as specified and as directed. |
| 64 | S&F in repair 25mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed. |
| 65 | S&F 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed. |
| 66 | Cutting chases, pinning in Brick wall, making good to facings where required & pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; & cutting chases for concealed water tubing or concealed conduit wiring, etc.& making good, cutting not exc 10 cm grith complete as specified and as directed. |
| 67 | Material and labour for Aluminium designer powder coated decorative curtain rods (Drapery rods) 20mm dia, exterior grade 3mm thick with and including side caps, holding clamps and 'F' and 'L' brackets, fixed to wall with PVC rawl plug and brass screws etc., complete all as specified and as directed. |
| 68 | Dimolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar and removing rubbish complete all as specified and as directed. |
| 69 | Material and labour for Granite work with 20mm thick machine cut, Jet Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:4 bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window-cills, etc, including cutting, polishing and rounding to edges of stone slabs etc., complete all as specified and as directed. |
| 70 | Demolition Concrete of any description and in any position not otherwise specifically provided for drain, etc complete all as specified and as directed. |
| 71 | Material and labour for providing plain cement concrete 1:3:6 type C2, using( 40mm graded stone aggregate )as in drain / surface channel including necessary form work complete all as specified and as directed. |
| 72 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends complete all as specified and as directed. |
| 73 | Supply and fix 50 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/sqcm laid in any length with rubber ring joint complete all as specified and as directed. |
| 74 | Returning filling including spreading leveling watering and well ramming in layers not exc 25 cm hard and dense soil complete all as specified and as directed. |
| 75 | Removing excavated materialnot exc 1.50km but n exc 5.0km and depositing where directed (Soils) at a level not exc.1.5mts above the starting point complete all as specified and as directed. |
| 76 | Supply and fix two way Bib cock 15 mm bore, cast copper alloy, chromium plated, fancy type with flange and crutch or butterfly handle conforming to IS as per Cat No.CON-041 of Jaquar or T3534A1 of Parryware or specified makes, screwed down high pressure with fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed. |
| 77 | S& F in repairs 15mm bore dia fancy type Pillar cock cromium plated with wall flange complete .screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.Make : CERA ,Cat part No : QTF2006101, |
| 78 | Supply and fix in repairs Angular stop cock 15mm bore, cast copper alloy, chromium plated, fancy type with long shank conforming to IS as per Cat No.CON-053KN of Jaquar or G3053A1 of Parryware, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 79 | S&F in repairs Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule , complete all as specified and as directed. |
| 80 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and as directed. |
| 81 | S&F in repairs Viterous china wash down water closet pan (pedestal pattern) and 'P' or 'S' trap including fixing bolts, PVC bend, seat cover and connecting to PVC (SWR) pipe (Excl flush tank) , complete all as specified and directed. |
| 82 | Supply and fix in repair Vitreous China wash basin, white, flat back, size 600x480mm excluding ditto but including brackets making good to surface etc , complete all as specified and directed. |
| 83 | S&F Vitreous China White Urinal, Half Stall type (excluding Flushing Cistern, Flush Pipe and Waste Pipe) including Providing and Fixing Plugs, Bedding Urinals against Wall in Cement Mortar 1:2, securing Urinal to Plug with and including 60mm long Brass Chromium plated Screws, Pointing around Urinal back in Cement Mortar 1:3, fixing Urinal Spreder of Brass Chromium plated, Flush Pipe, Grating and Union for Discharge Pipe (but Exclusive of fixing Supply Pipe to Flushing Cistern, Trap and Waste Pipe) complete all as specified and as directed. |
| 84 | S&F as in repairs PVC valveless, symphonic action type low level flushing cistern white with inlet, ball valve, float and handle etc complete capacity 10 litres including brackets and upto 1mtr long PVC pipe of 40mm dia and bend complete all as specified and directed. |
| 85 | S&F in repairs Towel rail 600mm long complete all as specified and directed.( Make : Prayag Cat No GBA-131 or equivalent in Parryware/Hindware) |
| 86 | S&F in repairs soap dish complete all as specified and directed.( Make : Prayag Cat No GBA-151G or equivalent in Parryware/Hindware) |
| 87 | S&F in repairs 5.50mm thick looking mirror of size 600 x450mm mounted on 6mm thick plywood backing or AC sheet backing including framing with 2nd class hard wood of size 30mm x40mm decorative type polished and fixed to wooden plugs with cromium plated brass screws and cupwashers and chamfered glass from all sides fixed with steel screws all as specified and directed. |
| 88 | S&F in repairs, two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed.. |
| 89 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 90 | Taking down Cast iron / PVC pipe 75mm/ 110mm, etc jointed in cement mortar taking out of wall. including all fittings, heads, sheos, bends, swan-necks, etc complete all as specified and as directed. |
| 91 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed. |
| 92 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 93 | S & F PVC (SWR) bends of any radious 110 mm bore provided with acess door complete all as specified and directed. |
| 94 | S & F PVC (SWR) bends of any radious 75mm bore provided with acess door complete all as specified and directed. |
| 95 | S & F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed. |
| 96 | S&F in repair 75 mm dia PVC floor trap with cockroach trap and grating (double bowl type) with hole for waste pipe in grating including jointing to waste pipe complete all as specified and as directed. |
| 97 | S&F in repair 100mm dia PVC floor multi trap with and grating of size 100 x 100 mm complete all as specified and as directed. |
| 98 | Supply only liquid water proofing compound of approved make complete all as specified and as directed. |
| 99 | S&F PVC(SWR) 150mm dia half round Rain water gutter incl all joints etc complete all as specified and as directed. |
| 100 | M&L for complete removal of existing treatment on surfaces of wall and applying two coats of Oil bound distermper over a coat of alkali resistant priming paint by approved applicator of the manufacturer of the paint complete all as specified and directed. |
| 101 | M&L for complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying, one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint complete all as per manufacturer instruction complete all as specified and as directed: Make :-APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or Nerolac Excel Top guard of Nerolac |
| 102 | M&L Preparing newly plastered surfaces of external walls and applying one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint complete all as per manufacturer instruction complete all as specified and as directed.Make:APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger or Nerolac Excel Top guard of Nerolac |
| 103 | M&L for preparation of new surfaces of walls and applying with white putty of average thickness 1.5mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of alkali resistant priming paint by approved applicator of the manufacturer of the paint complete all as specified and directed. |
| 104 | M&L for complete removal of existing treatment on surfaces of ceiling and applying two coats of white wash complete all as specified and as directed. |
| 105 | M&L for point wiring complete with 1.5 Sq mm single core PVC insulated FRLS unsheathed cable 1100 Volts grade with multi stranded copper conductor confirming to IS 694-1990 with ISI marked ( for phase, netural and earth) in and including PVC conduit with ISI mark of minimum 20 mm ia and all accessories concealed including / cutting / chases in wall / ceiling /fixed to roof /truss/ columns etc and including factory made branded make embossed glvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for one light point / fan / call bell point controlled by one modular switch 6 A one way |
| 106 | All as per Item No 104 herein before but 3 pin socket out let 6 Amps on independent board |
| 107 | M&L for point wiring complete all all as specified with 1100 Volts grade 2.5 sqmm single core PVC insulated FRLS 1000 Volts grade with multi stranded copper conductor confirming to IS 694 1990 with ISI marked ( for phase, netural and earth ) in and including stove enamelled steel conduit with ISI mark of minimum 20 mm ia and all accessories concealed including / cutting / chases in wall / ceiling /fixed to roof /truss/ columns etc and including factory made branded make embossed glvanised steel pressed terminal boxes alongwith suitable size modular cover plates with frames for fixing modular switches and sockets , fan regulators etc. of suitable size and the earth wire to connected to common earth dolly complete all as specified and directed for one three pin modular switch socket 16 Amps outlet on independent board |
| 108 | M&L Modular switch 1 way 6A, 1 module all as specified and directed. |
| 109 | M&L Modular switch 1 way 16A, 1 module all as specified and directed. |
| 110 | S & F Socket, 6A - 2/3 pin combined 2 module, all as specified and directed. |
| 111 | S & F Socket 6A/16A - 2/3 pin combined 2 module, all as specified and directed. |
| 112 | M&L Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body all as specified and directed |
| 113 | S&F Modular White cover plate with frame, 2 module all as specified and directed. |
| 114 | S&F Modular White cover plate with frame, 3 module all as specified and directed. |
| 115 | S&F Modular White cover plate with frame, 4 module all as specified and directed. |
| 116 | S&F in repair LED street light /security light luminaries fitting 1X30 watt LED with min 120 lumens/watt output including GI bracket made out of GI pipe light grade 25 mm dia 1.20 m long bent to shape with suitable size mild steel clamps of size 50 X 6mm with nut, bolt, & washers as required at site for fixing of street light on LT poles / wall including making connection with PVC insulated 3 single core of 1.5 sqmm size multistranded copper conductor cable complete all as specified and directed. |
| 117 | S&F in repair LED tube light batten, 20W(4 ft.), LED, 6000K,Wall mounted, min lumen out put 100 lum/watts extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, lamp color white including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 118 | Supply and fixing in repair ultra modern, recess mounting, 45W, 6500K/3000K (White/WW) IP 20, CRI > 80, THD<10%, min lumen out put 120 lum/watt LED luminaire of size 2' X 2' suitable for false ceiling with suitable fixing arrangement incl cutting existing false ceiling any type (if req) & matching complete with existing surface incl electronic driver & high brightness LEDs light fittings complete all as specified and as directed. |
| 119 | M & L for concealed sub-main wiring alongwith earth wire of size (2 x 4.00) sq. mm + (1 x 4.00) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. |
| 120 | S & F SPN DB, 8 Way, Metal double door type 240 volts fitted with 200 Amps rated busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed. |
| 121 | Supply and fixing in repair SP 6 To 32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified and as directed. |
| 122 | All as per item No 120 but SPN 32 Amp complete all as specified and directed. |
| 123 | M&L for Earthing with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering, Cast Iron frame with hinged pit cover of size 12\\"x12\\" having 7 kg weight complete all as shown in drg and connected to earth test point including testing as directedNote : The length of the Gi wire beyond 7.5 mtr will be measured and paid separately. |
| 124 | SPECIAL REPAIRS TO FLOOR & GATES IN MT AREA BUILDING NO .81 & 151 AT DSSC WELLINGTON |
| 125 | Demolition of Concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed |
| 126 | Dismantling MS steel work of any descrption and not otherwise provided for complete all as specified and as directed |
| 127 | M&L for Hard core, broken to gauge n exc 63 mm with broken stone /boulders complete all as specified and directed. |
| 128 | M& L for 75mm thick PCC type C-2(1:3:6) using 40mm graded stone aggregate as insub base for top finish of any description etc including finishthe surface even and rough to receive the top finish complete all as specified and directed. |
| 129 | M&L for 50 mm thick PCC type B1 (1:2:4) using 20 mm graded aggregate in floors finished even and fair complete all as specified and as directed |
| 130 | M&L for glass deviding strips 3.00 mm thick and 38 mm width inserted in position confirm to design complete all as specified and as directed |
| 131 | M&L for Spike rolling to surfaces or making impressions of expanded metal whilst the concrete green with using extra cement complete all as specified and as directed |
| 132 | S&F mild steel for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, prong etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door fittings, inclusive of steel sheeting or other covering, running rails and guides, CI ornaments fitting; also fastening and fixing complete and similar work confirming to Fe-290 Gde E- 165 complete all as specified and as directed |
| 133 | M&L 15mm thick rendering on stone masonery surface incl finish the surface even and smooth without using extra cement in CM 1:6 complete all as specified and as directed . |
| 134 | Material and labour for two coat synthetic enamel paint on steel surface over one 10 cm in width or girth over coat of red oxide primer incl prepareation of new or old steel surface complete all as specified and directed. |
| 135 | Material and labour for one coat of synthetic enamel paint over 10 cm width or girth on old steel surface incl prepareation of old steel surface complete all as specified and directed. |
| 136 | Material and labour for appying two coat cement base paint over one coat chalk white primer on newly plastered surface including preperation of the surface complete all as specified and directed. |
| 137 | SPECIAL REPAIRS TO COVERED STAIR CASE FROM C DIVISION (AKBAR BLOCK) TO KATTABOMMAN TEA ROOM AT DSSC WELLINGTON |
| 138 | Excavation in post holes (or similar holes) each n exc 0.5cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm ,in watering and removing surplus soil to a distance n exe 50m and making good surface in hard/dense soil complete all as specified and directed. |
| 139 | Demolition of brick work built in cement mortar including all quoins arches, pillars etc but excluding ashlars facings, dressed stone work & precast concrete articles complete all as specified and as directed. |
| 140 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 141 | M&L Precast cement concrete block type C1 (1:3:6)(using 20mm graded aggregate) masonry with solid blocks exc 10cm width and setting in mortar(1:6) complete all as specified and directed. |
| 142 | M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth (without using extra lime or cement) complete all as specified and as directed. |
| 143 | M&L for Preparing the new plastered surfaces of wall and applying two coats white wash complete all as specified and as directed. |
| 144 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided etc (below or above ground level) as in roof pad/ floors etc and removing debris off the site complete all as specified and as directed. |
| 145 | M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed. |
| 146 | M&L 75mm thick PCC 1:4:8 type D2 (40 mm graded aggregate) finished cement concrete surface even and smooth all as specified and as directed. |
| 147 | M&L 50mm thick pcc 1:2:4 type B1 (20mm graded aggregate) all as specified and as directed.. |
| 148 | M&L heavy duty vitrified unporcelain floor tiles of size 300x300 mm , 10 mm thick suitable for heavy vehicles movement, laid in floors/skirting of pattern as approved set and jointed with Epoxy grout with spacers to match over 20 mm thick cement mortar (1:6) all as specified and as directed.make Neo Deccan Natural of Somany / Endura of Johnson, or equivalent in makes specified. |
| 149 | Dismantling MS steel work of any description as in railing, gate, grill etc complete all as specified and as directed |
| 150 | M&L Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 quality A complete all as specified and as directed. |
| 151 | M&L for Rolled sections as in main and cross beams, hip and jack rafters;purlins where connected to common rafters and running rails and guides for sliding doors;fixed with angle cleats or other connecting plates conforming to Fe-410-W(Gde-E-250) quality B complete all as specified and directed. |
| 152 | Material and labour for two coat SE paint on steel surface over over 10 cm in width or girth one coat of red oxide primer incl prepareation of new or old steel surfacecomplete all as specified and directed. |
| 153 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. Note - work will be carried out upto 15 mtr height. |
| 154 | S&F repairs Pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50mm thick of any colour and in circular /arch shape as in roof covering/sunshades having tensile strength of 550 Mpa fixed with screew/hookes typecomplete all as specified and directed. |
| 155 | S&F PVC(SWR) 150 mm dia half round Rain water gutter incl all joints etc complete all as specified and directed. |
| 156 | S&F PVC(SWR) bends any radius 110mm bore provided with access door complete all as specified and directed. |
| 157 | S&F Aluminium wind tie (flat) with 50 mmx 6mm thick including necessary cutting, drilling and fabrication etc including fixed with self tapping screws on new or old CGI/Polycarbonate roofing etc. complete all as specified and directed. |
| 158 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate steps, seismic and other similar bands, plinth courses string courses, lacingcourses,parapets and railing upto 60cm in height, copings, kneelers, apex stones,bed plates, kerbs , water troughs and the like including weathering, slighty rounded or chamfered angles and throating, complete all as specified and directed. |
| 159 | PROVISION OF UPVC WINDOWS AND DOORS AT ADDITIONAL SYNDICATE ROOM OF A DIVISION AT DSSC WELLINGTON |
| 160 | Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed. |
| 161 | Material and labour for Rendering in Cement Mortar ( 1:6) 15 mm thick on stone masonry or other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed. |
| 162 | M&L for preparation of new surfaces of walls and applying with white putty of average thickness 1mm and making the surface to an even and smooth finish by rubbing with sand paper of different grade etc and applying two coats of Oil bound distermper over a coat of primer all as per manufacturer instruction and complete all as specified and directed. |
| 163 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and directed. |
| 164 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 165 | Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender