Tender For Welcome Maintenance Including Certain B/R Works In Smqs Of Tv Area At Afs Bareilly Under Ge (Af) Bareilly
Tender Value
35 Lakhs
Estimated cost
Bid Submission
14 Sep 2026
17 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Welcome Maintenance Including Certain B/R Works In Smqs Of Tv Area At Afs Bareilly Under Ge (Af) Bareilly
BOQ
| Sl. No. | Item Description |
| 1 | M&L for complete removal of existing treatment by scrapping with mechanical wall sander (mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc complete all as directed. |
| 2 | M&L for complete removal of existing surfaces / newly plastered surface of walls and applying three coats of white wash all as specified. |
| 3 | M&L for complete removal of existing surfaces / newly plastered surface of ceiling and applying three coats of white wash all as specified. |
| 4 | M&L for preparation of surfaces of walls and cornices by booming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, stopping (filling of putty on holes, unveven surface) etc and applying one coat of oil bound distemper on the surface all as specified. |
| 5 | M&L for applying 2 mm (average) thickness white cement based putty including sand papering the puttied surfaces to form an even and smooth surface of wall all as specified. |
| 6 | M&L for applying two coats of oil bound distemper over one coat of primer on wall using airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro-guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface all as specified. (Note :- The work shall be executed by authorised applicator of manufacturer of paints as approved by GE). |
| 7 | M&L for preparation of old treated surface of ceiling including brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efforescent salts dust and loose paint etc and applying one coat of oil bound distemper on all as specified. |
| 8 | M&L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10 cm width or girth and applying one coat synthetic enamel paint all as specified. |
| 9 | M&L for preparation of old painted steel and iron based surfaces of any description not other wise described over 10 cm width or girth and applying one coat synthetic enamel paint at height upto 12 mtr from ground level all as specified. |
| 10 | Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water, etc including removal of debris from site to outsite MOD Land. |
| 11 | M&L for rendering 15mm thick in cement mortar (1:6) on fair face of brick or concrete surfaces including finishing surface even and smooth without using extra cement all as specified. |
| 12 | M&L for rendering 5 mm thick with cement mortar (1:3) on concrete surfaces as on ceiling, surface finished even and smooth without using extra cement all as specified. |
| 13 | Dismantling floor, hearth or wall tiling including cement mortar bedding/ terrazo dado (but not backing) including removal of debris from site to outsite MoD Land |
| 14 | M&L for 25mm thick cement concrete 1:2:4 type, B-0 using 12.50 mm graded stone aggregate as in sub base for floor finishes all as specified. |
| 15 | M&L for joint free non skid colour ceramic tiles 7 to 8 mm thick first quality (Square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile including 15 mm thick screed bed in cement mortar (1:6) all as specified . |
| 16 | M&L for non skid colour ceramic tiles 7 mm to 8 mm thick first quality (Square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile including 15 mm thick screed bed in cement mortar (1:6) all as specified . |
| 17 | M&L for Glazed ceramic coloured/printed tiles first quality of size 350 mm x 250x 7 mm/ 450X 350X 7mm thick on vertical surface, skirting, dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match the tile including 10 mm thick rendering in cement mortar 1:4 all as specified. |
| 18 | M&L for taking down existing shutter and repairing, easing, adjusting and also re-fixing builder hardware of any description and refixing the shutter in the same opening of area exc 1 Sqm and not exc 2 Sqm each all as specified. |
| 19 | Taking down chowkhat or frame with shutter (without taking off shutter from frame and fittings not exc 1.5 Sqm each all as specified. |
| 20 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each all as specified. |
| 21 | Taking down chowkhat or frame with shutter (without taking off shutter from frame and fittings exc 1.5 Sqm and not exc 4 Sqm each all as specified. |
| 22 | M&L for second class hard wood for plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed all as specified. |
| 23 | M&L for treating small article such as hold fast area not exc 0.1 each with black tar or coal tar black paint including preparation of surfaces all as specified. |
| 24 | M&L for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in bed block for hold fast including necessary from work all as specified. |
| 25 | M&L for 30 mm thick factory made flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides all as specified. |
| 26 | M&L for second class hard wood factory made glazed and skeleton shutter 35 mm thick, open rebated and prepared to receive glass, gauze etc fitted with cut and mitred beads for securing glass, gauze etc for door shutters; sizes of members of shutters as specified in SSR Part-I, Section 8. clause 8.24 (a) for doors supplied and fitted to chowkats complete all as specified. |
| 27 | S&F for 30 mm thick factory made solid panel PVC door shutter conforming as per IS-4020 made from MS tube of 19 Gauge thickness of size 19 mm x 19 mm style and 15 mm x 15 mm for rail covered with heat moulded PVC channel of 5mm thick and 75 mm, 125 mm, 125 mm wide for top rail, lock rail and bottom rail on either side at 5mm thick 20 mm wide cross PVC sheet of gap inserted for top rail and bottom rail, paneling of 5 mm PVC sheet fitted in MS frame welded / sealed to the style at rail with 30 mm wide, 5 mm thick PVC sheet beading sides and jointed together with solvent cement adhesive etc including aluminimum mongry all as specified and directed by Engineer-in-Charge. |
| 28 | S&F for factory made PVC door frame of size 50 mm x 47 mm with a wall thickness of 5 mm grid PVC sheet mitered at corner and pinned with two members 150 mm long brackets of 15 mm x 15 mm mild steel Square tube 19 gauge EPDM rubber gasket weathered sheet to be provided through the frame, door frame to be fixed to the wall using MS screw of 65 mm / 100mm size as per manufacturer specification. |
| 29 | S&F in repair 18 mm / 19 mm pre-laminatd particle board, interior grade, prelaminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to frame work all as specified. |
| 30 | S&F in repair 12 mm pre-laminatd particle board, interior grade, pre-laminated one side with deocrative choice lamination & other side balancing white lamination, fixed with screws to frame work |
| 31 | S&F in repair continuous (piano) hinges, mild steel, bright finish width of flaps (when open) in 30 mm or electrogalvanised all as specified. |
| 32 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position in all as specified. |
| 33 | S&F for mild steel for hold fasts, wall ties and similar small articles conforming to Fe-290 Gde-E-165 all as specified. |
| 34 | S&F for 100 mm long mild steel cold rolled, butt hinges medium type and fixed all as specified. |
| 35 | S&F for 150 mm long aluminium handles, cast type, anodised all as specified. |
| 36 | S&F for 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified. |
| 37 | Hacking out old broken glass of any description, from old wooden or steel, concrete or brick surrounds, any thickness or size all as specified. |
| 38 | S&F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sqm in each pane all as specified. |
| 39 | S&F for 3 mm thick sheet glass, figured glass ,pinhead type in with oil putty in squares not exceeding 0.50 Sqm in each pane all as specified. |
| 40 | S&F for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified. |
| 41 | S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples |
| 42 | S&F in repairs 15 mm dia bib tap, brass chromium plated, fancy type with crutch or butterfly handle screwed down screwed all as specified. |
| 43 | S&F in repairs vitreous china sqautting pan orissa pattern size 580 mm x 440 mm white with intergral foot rest including cast iron \\"P\\" or \\"S\\" trap including PVC flush pipe and making good floor as per existing all as specified. |
| 44 | S&F in repairs 10 ltr capacity PVC flushing cistern, valveless, syphonic action type, low level, white, with inlet, ball valve, float and handle including brackets all as specified. |
| 45 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white colour, including PVC seat cover white all as specified. |
| 46 | Taking up or down steel tubing and connections including cleaning for refixing of15 mm bore all as specified. |
| 47 | M&L for 20 mm nominal dia pipes chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1 mtr spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and concealed work, including cutting chases and making good the walls etc.including testing of joints complete all as specified. |
| 48 | Dismantling of stone slab and tiles laid, bedded and pointed in any mortar of any description and thickness all as specified. |
| 49 | S&F for 18 mm to 20 mm thick (table rubbed and polished) udaipur green stone slab work as in steps, jambs, pillars, window cills, cooking platform and like in 15 mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade all as specified. |
| 50 | S&F in repair 32 mm dia waste coupling of PTMT (half or full threaded) (minimum weight 32 mm-45gms / 40 mm-60 gms all as specified |
| 51 | S&F in repair 15 mm chromium plated brass wall mixure three-in-one with hand shower and accessories with mark Hot and Cold all as specified. |
| 52 | S&F in repair stop valves / angle cock 15 mm dia cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified. |
| 53 | M&L for fly ash brick works, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 all as specified. |
| 54 | M&L for cleaning and removing all scale and dirt etc from tank of capacity exc 500 and not exc 1000 ltr including mouths of circulating pipes etc all as specified. |
| 55 | M&L for cleaning and removing all scale and dirt etc from tank of capacity exc 250 and not exc 500 ltr including mouths of circulating pipes etc all as specified. |
| 56 | S&F in repair 15 mm dia brass chromium plated wash hand basin mixer 2 in1 for mixing for Hot & Cold water screwed down for iron pipe and fixed all as specified. |
| 57 | M&L in repair 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified. |
| 58 | M&L for welding in repairs not 2.5 cm but not exc 5 cm in length and thickness of metal to be welded not exc 6 mm all as specified. |
| 59 | Demolition of cement concrete in ground floor and paving not exc 15 cm thick below or above ground level all as specified. |
| 60 | S&F in repair 20 mm dia stainless steel curtain rod with fixing brackets, stops, side fancy rollers etc all as specified. |
| 61 | M&L for 75 mm thick cement conrete 1:4:8 type D-1 using 40 mm graded crushed stone aggregate as in floors finishes in sub base all as specified. |
| 62 | S&F for chequared cement concrete tile of size 300 mm x 300 mm x 25 mm thick, set jointed and pointed in neat cement slurry as in floor including 20 mm thick screed bed in cement mortar (1:4) all as specified. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender