Tender For Improvement Of Road From Shalgarah Bazar To Saharabanu House Including Road Side Protection And Drainage System Via Rail Bridge / Sh- Wbm-Iii, Tack Coat, Bituminous Concrete, Cement Concrete Wall Etc. During The Year 2026-27.
Tender Value
1.41 Crore
Estimated cost
Bid Submission
29 Aug 2026
3 days left
EMD
2.83 Lakhs
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gomati → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Improvement Of Road From Shalgarah Bazar To Saharabanu House Including Road Side Protection And Drainage System Via Rail Bridge / Sh- Wbm-Iii, Tack Coat, Bituminous Concrete, Cement Concrete Wall Etc. During The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation for StructuresA. Without dewatering.Earthwork in excavation for structures as per drawing and MoRD technical specifications Clause 305.1 including setting out, construction of shoring & bracing, removal of stumps & other deleterious material and disposal upto a lead of 50 m, dressing of sides & bottom and backfilling in trenches with excavated suitable materials. |
| 2 | Filling in foundation trenches as per drawing and MoRD technical specification clauses 305.3.9, 1200.I) Sand filling |
| 3 | Providing concrete for plain concrete /reinforced concretein open foundations complete including formwork as per drawings & MoRD technical specifications Clauses 802, 803, 900, 1202 and 1203. (including centring, shuttering, staging etc. but excluding reinforcement ).(I) P.C.C grade M 10 i) Nominal Mix 1:3:6 |
| 4 | ii) PCC grade M15 (1:2.5:5) Nominal mix |
| 5 | Plain/ Reinforced Cement concrete in Sub Structure including form work as per drawing and MoRD technical specification clauses 802, 804,805,806,807,900,1202 and 1204 (including centering , shuttering staging etc. but excluding reinforcement ) i) PCC grade M15 (1:2.5:5) Nominal mix |
| 6 | WBM - 3Providing, laying, spreading and compacting Jhama Brick aggregates to water Bound Macadam specification including spreading in uniform thickness, hand packing rolling with three wheel rollar 80 - 100 KN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of course aggregate, watering and compacting to the required density grading - 3 as per MoRD technical specification clause 405. |
| 7 | WBM - 2Providing, laying, spreading and compacting Jhama Brick aggregates to water Bound Macadam specification including spreading in uniform thickness, hand packing rolling with three wheel rollar 80 - 100 KN in stages to proper grade and camber, applying and brooming binding materials to fill up the interstices of course aggregate, watering and compacting to the required density grading - 2 as per MoRD technical specification clause 405. |
| 8 | Prime Coat(i) Low porosity Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.00 kg/sqm using mechanical means as per MoRD Technical Specification Clause 502. |
| 9 | Track CoatProviding and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per MoRD Technical Specification Clause 503. |
| 10 | Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed ggregates of specified grading, premixed with bituminous binder @ 5.40 Percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. B. Grading II (For layer thickness 30 - 40 mm) i. With viscosity Graded Bitumen of VG-30. |
| 11 | Repairing pot-holes and making up small depressions with ramming or power rolling after removal/ disposal of disintegrated materials within a lead of 50 m, cutting pot holes to regular shapes with vertical edges and levelling the bottom, cleaning the same with compressed air or any other appropriate method including screening, cleaning of aggregates; and filling up with with jhama chips using bitumen of VG-30 @ 54 kg per m3 of loose volume of jhama brick chips, after applying tack coat of bitumen on sides and bottom @ 0.75 kg/ sqm and finishing the top of repaired surface levelled with adjoining area in proper grade and camber including spreading of sand @ 0.006 cum/ sqm of prepared road surface as per direction of the Engineer-in-Charge and all as per MoRD technical specification Clauses 1900, 502, 503 and 504. |
| 12 | Construction of road side pucca drain with M10 (1:3:6 with jhama brick aggregate) to specified lines, grades, levels and dimensions as per approved design and MoRD Technical Specification Clause 307, 1606. Excavated material to be used in embankment at site. (including centering, shuttering, etc. but excluding reinforcement) |
| 13 | Maintenance of Earthen shoulder (Stripping of excess soil)Stripping excess soil from the shoulder surface to achieve the approved level and compacting with plate compactor at OMC as per drawing and MoRD technical specification Clause 1903. |
| 14 | Road marking strips (retro-reflective) of specified shade / colour using Hot Applied thermoplastic material withReflectorising Glass Beads on Bituminous Surface Providing and applying 2.5 mm thick thick road markingstrips (retro-reflective) of specified shade/ colour using hot thermoplastic material including reflectorising glass beads@ 250 gms per sqm area by fully/ semi automaticthermoplastic paint applicator machine fitted with profileshoe, glass beads dispenser, propane tank heater andprofile shoe heater including cost of cleaning the roadsurface of all dirt, seals, oil, grease and foreign materialetc, thickness of 2.5 mm is exclusive of surface appliedglass beads as per IRC:35. The finished surface to be level,uniform and free from streaks and holes as per MoRT&HTechnical Specification Clause 803. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysAug 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender