Tender For Annual Repair And Maintenance Of Various Residential Buildings Under Division No.-03, Shimla (Sh:- Repair Of Cupboards, Repair Of Doors, Repair Of Flooring Of Stairhall, Apex In Flooring Of Enterance And Sanitary Installation Etc. In C-7, Type-
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Aug 2026
6 days left
EMD
8430
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Annual Repair And Maintenance Of Various Residential Buildings Under Division No.-03, Shimla (Sh:- Repair Of Cupboards, Repair Of Doors, Repair Of Flooring Of Stairhall, Apex In Flooring Of Enterance And Sanitary Installation Etc. In C-7, Type-V At Bemloe, Repair Of Cupboards In Bloxk-4 Set No. 58 And Pvc Flooring In Block-30 Set No. 15 At Us Club)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves, hold fasts and other attachements etc. complete and stacking them including carriage of materials within all leads and lifts |
| 2 | Providing wood work in frames of false celling partitions etc. sawn and put-up in position including carriage of materials in all leads and lifts.Rae/chill wood |
| 3 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-incharge. (Note:- Butt hinges and necessary screws shall be paid separately) Deodar wood wood 40 mm thick shutters |
| 4 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws including all leads and lifts and as directed by theEngineer-in-Charge. : 40mm thick shutters 2nd class deodar wood |
| 5 | Providing and fixing 9mm thick water proof kit ply of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) including carriage of materials within all leads and lifts |
| 6 | Providing and fixing 6mm thick ply wood lining with butt jointing and nails (frame work and cover fillets to be measured and paid for separately) including carriage of materials within all leads and lifts |
| 7 | Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete including carriage of materials within all leads and lifts. |
| 8 | Providing and fixing 19mm thick Commercial Board shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts |
| 9 | Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts. |
| 10 | Providing and fixing hard wood square edges cover fillets (beading) 19mmx6mm section i/c mitring at junctions with wood screws and nails complete including carriage of materials within all leads and lifts |
| 11 | Providinh and fixing 4mm thick teak ply wood lining with butt jointing and nails etc. (frame work and cover fillets to be measured and paid for separately) including carriage of material with in all leads and lifts |
| 12 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :250x16mm |
| 13 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :(i) 200x10mm |
| 14 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 150mm |
| 15 | 125mm |
| 16 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials in all leads and lifts. |
| 17 | Providing and fixing 1.50 mm thick pvc/rubber tiles flooring (L.G. Make) plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment(to be measured separately)for payment including carriage of materials within all leads and lifts |
| 18 | Providing and fixing Hand wooven flooring covering to floor having pile height 5.5mm and weight 1450-1550 grm per sqm. Plain or coloured laid with an approved adhesive on sub floor including cutting and fixing complete to sub floor including damp proofing treatment (damp proofing treatment to be measured separately for payment) as per the direction of Engineer-in-Charge including carriage of material with in all leads and lifts |
| 19 | Providing and fixing PVC ceiling/paneling with tongued and grooved jointing of standard quality and approved shade and colour complete including carriage of material within all leads and lifts as per direction of Engineer-in-Charge |
| 20 | Providing and fixing glass panes with putty and nails including removal of broken glass panes wherever necessary including carriage of materials within all leads and lifts. Plain Glass:4.00mm thick |
| 21 | Providing and applying white wood based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 22 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 23 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture complete including carriage of materials in all leads and lifts |
| 24 | Polishing two coats with melamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler including carriage of materials in all leads and lifts |
| 25 | Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two or more coats on Old work) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete including carriage of materials within all leads and lifts |
| 26 | Providing and laying in trenches G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. complete as per design approved by Engineer-in-Charge. External work 25mm nominal bore |
| 27 | 15mm nominal bore |
| 28 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of materials within all leads and lifts 25mm nominal bore |
| 29 | 15mm nominal bore |
| 30 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) including carriage of materials within all leads and lifts as per direction of Engineer-in- charge:- 25mm nominal bore |
| 31 | Providing and fixing G.I. Tee 25mmx15mm of approved brand including carriage of materials within all lead and lifts |
| 32 | Providing and fixing C.P. extension nipple 25mmx50mm including carriage of materials within all leads and lifts |
| 33 | Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to be measured and paid for separately):-Anglo Indian Universal closet including carriage of materials within all leads and lifts |
| 34 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. including carriage of materials within all leads and lifts |
| 35 | Providing and fixing 45cm length UPVC connection pipe with brass unions 15 mm nominal bore complete including carriage of materials within all leads and lifts |
| 36 | Providing and fixing 15mm dia C.P.brass Angle cock of approved quality including carriage of materials within all leads and lifts |
| 37 | Disposal of building rubbish/ malba/similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 mm initial lead, for all leads including all lifts involved. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender