Tender For Annual Repair & Maintenance Of To Various Residential Building Under Shimla Division No.Iii Sub-Division No.V(Sh:- Repair Of Damaged Roofs, Wall Penelling Various Toilets Etc.In M.H.No.4,5,7,9,9A And 11)
Tender Value
Ref. Documents
Estimated cost
Bid Submission
31 Aug 2026
2 days left
EMD
9200
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Shimla → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Annual Repair & Maintenance Of To Various Residential Building Under Shimla Division No.Iii Sub-Division No.V(Sh:- Repair Of Damaged Roofs, Wall Penelling Various Toilets Etc.In M.H.No.4,5,7,9,9A And 11)
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing 2 mm thick Polycarbonate Transparent sheet plain lining with necessary screws/nuts & bolts/ nails, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). |
| 2 | Dismantling roofing including ridges, hips, valleys and gutters etc and stacking the material within all leads of GS. Sheetincluding carriage of materials within all leads and lifts as per direction of the Engineer - in - charge. (1) G.S. Sheet |
| 3 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge |
| 4 | Providing corrugated G.I sheet roofing fixed with galvanised iron J.or L. hooks bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins refters & trusses. 0.63 mm thick sheet including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge |
| 5 | Providing and fixing ply wood lining with butt jointing and nails (frame work and cove fillets to be measured and paid for separately) including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge 6mm Thick |
| 6 | Providing and fixing 19mm thick commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge |
| 7 | Providing and fixing 19mm thick Commercial Board shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete) including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge |
| 8 | Providing and fixing 1.00mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge |
| 9 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge |
| 10 | Providing and fixing bright finished brass handles with screws etc. complete.100mm size including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge |
| 11 | Providing and fixing 12mm thick imported pine wood ceiling/paneling with tongued and grooved jointing of standard quality ISI mark and approved shade and colour complete including carriage of material within all leads and lifts as per direction of Engineer-in-Charge. |
| 12 | Polishing two coats with malamine polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler. |
| 13 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. |
| 14 | Providing and Fiving PVC Board prelaminated Vanity Size 810x760movincluding Chiana Wach Basin suitable for use as Copboard Ruck under Wash Basia With CP Brass hinges and Rabbes Butlers, Wash barin of Size 600x500mm with ct Brackets. 15mum CP Bras Pillar Toys2mm CP Brass Waste of Standard Pattern Complete including carriage of Marerials with in all leads and Jufts as per direction of Engineer-in-Charge CAT NO MH-67 Artis |
| 15 | Providing and fixing CP brass Sink mixer of approved quality with fittings complete including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge |
| 16 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour:-15mm nominal bore with 45cm length. including carriage of materials within all leads and lifts as per direction of the Engineer - in - charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender