Tender For Restoration Of Rain Damages Of Lift Water Supply Scheme Bod Kawalu In Tehsil And District Kangra (H.P). (Sub Head :- Providing And Placing Filter Media For Improvement In The Quality And Quantity Of Water).
Tender Value
4.48 Lakhs
Estimated cost
Bid Submission
02 Sep 2026
3 days left
EMD
8980
Bank guarantee accepted
Document Fee
350
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Restoration Of Rain Damages Of Lift Water Supply Scheme Bod Kawalu In Tehsil And District Kangra (H.P). (Sub Head :- Providing And Placing Filter Media For Improvement In The Quality And Quantity Of Water).
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work,jumper work,blasting in soft and hard rock and chiselling work including saturated soil slushy soil and under floor upto all depth and stacking the excavated soil not more than 3 metre clear from the edge of excavation and then returning the stacked soil in 15 centimetre (Fifteen centimetre) layer when required into plinth sides of foundation etc.consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge within all leads and lifts. |
| 2 | Providing and laying cement concrete 1:3:6(1:cement :3 sand:6 graded stone aggregate 40 mm nominal size) and curing complete excluding cost of form work in:-Foundation and plinth i/c carriage of material within all leads and lifts complete in all respect as per the dircetion and satisfaction of the Engineer-in-Charge. |
| 3 | Providing steel work welded in built upto sections bruses and framed work including cutting, hosting fixing in position and applying a priming coat of red lead paint in gratings framed quard bars, ladders, railling brackets and similar works complete with in all leads and lifts as per the direction and satisfaction of Engineer-in-Charge. |
| 4 | Providing and fixing Gun metal Gate valve/Peet valve of following dia ISI marked with hand wheel complete in all respect as per the direction and to the entire satisfaction of Engineer-in-Charge with all leads and lifts. |
| 5 | 65mm dia |
| 6 | 32mm dia |
| 7 | Providing and Fixing Cast iron Sluice Valve Bir/Kartar Make of various dia (with hand wheel) PN-1 as per BIS 786-1984 latest upto date ammendments standard make with bols, nuts, rubber insertion etc. (The tail pieces if required shall be measured & paid for separately) complete in all respect including all leads and lifts as per the direction and to the entire satisfaction of Engineer-In-Charge. |
| 8 | 80 mm dia |
| 9 | 65 mm dia |
| 10 | 50 mm dia |
| 11 | Providing, fixing, MS flanges confirming to IS-6392-1971 (Latest with upto date ammendments) of class /Table -5 specified welding both sides of flanges according to relevant standereds i/c nuts bolts and rubbur sheet washer confirming to IS 1367-1981 and complete in all respect as per the direction and to the entire satisfication of Engineer-in-Charge within all leads and lifts. |
| 12 | 80 mm dia |
| 13 | 65mm Dia |
| 14 | 50mm Dia |
| 15 | Dismentalling of existing pipe line of following dia (Earth work in trenches to be measured and paid for separately) within all leads and lifts as per the direction of Engineer-in-charge. |
| 16 | 65mm Dia |
| 17 | Re-laying, jointing and testing in trenches galvanised mild steel tubes, tube fitting (Light grade) of following dia. (Earth work in trenches to be measured and paid for separately) with in all respect as per the satisfaction of Engineer-in-charge. |
| 18 | 65mm Dia |
| 19 | Repair of leakage points by welding of pipes, Carraige of welding set and generator, straightening and re-alinment of pipe in position including excavation as per relevant codes and specifications at site of following dia including digging pits of 0.60x0.55x0.90 mtr size at leakage points complete in all respect. |
| 20 | 80mm dia |
| 21 | 65mm dia |
| 22 | 50mm dia |
| 23 | Painting two coats (excluding priming coat) on new steel surface with ready mixed paint brushing to give an even shadce i/c cleaning of all dirt, dust and other foreign matters sand papering and stopping and brushing enamelled paint other than white complete within all leads and lifts. |
| 24 | Providing and fixing of GI Union of various dia as per direction of Engineer-in-Charge complete in all leads and lifts. |
| 25 | 65mm Dia |
| 26 | 32mm Dia |
| 27 | Providing and fixing GI Nipple of following Dia 6\\" ISI marked complete in all respect. |
| 28 | 32mm dia 4\\" long |
| 29 | 65mm dia 6\\" long |
| 30 | Providing and fixing GI Tee of 25 x 25 x 25mm Dia ISI marked complete in all respect. |
| 31 | Providing & placing in position in horizontal layer filtering media as per IS: 8419 (part-I) 1977, dully screened, washed and cleaned as specified by the Engineer-in-Charge. |
| 32 | Bottom layer Broken stone 50mm to 75mm |
| 33 | Bajri 20mm to 25mm |
| 34 | fine sand effective size 0.20 to 0.40 mm uniform co-efficient 2 to 3mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender