Tender For Repair Replacement Preventive Maintenance Of Filters, Motor Pumps, Electric Panels, Various Sizes Of Ms / Upvc Pipe Line, Valves, Under Water Fittings, Rewinding Of Motor Certain Miscellaneous Connected Items Including Supply Of Consumable
Tender Value
Ref. Documents
Estimated cost
Bid Submission
14 Sep 2026
20 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pune → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair Replacement Preventive Maintenance Of Filters, Motor Pumps, Electric Panels, Various Sizes Of Ms / Upvc Pipe Line, Valves, Under Water Fittings, Rewinding Of Motor Certain Miscellaneous Connected Items Including Supply Of Consumable Chemicalsfor Treatment Of Water Of Swimming Pool At Aundh And Repair And Maintenance Of Various Motors, Pumps, Valves, Blowers Feed Pump, Filtration Tank Etc Including Cleaning Of Sludge Tank, Raw Sewage Tank, Settling Tank, Aeration Tank Etc And Connected Pipe Line Network Of 0.6 Mld Stp At Range Hills And Repairs To Electrical Panel And Allied Under (Mh & Rh) Khadki
BOQ
| Sl. No. | Item Description |
| 1 | M&L for cleaning for swimming pool complete which include cleaning of floor/ wall surface area by brush or suction sweeper for non development of algae etc by adding approved chemicals, suction sweep to be carried out by skilled labourers once in a week by using chemical items such as Alum ferric, Bleaching Powder, TCC 90, Copper Sulphate, Soda ash complete all as specified and directed . Note:- Rate quoted shall be deemed to includes for:- (i) On every Thursday total labour, minimum 04 Nos {pipe fitter (skilled)-1 No, labour (unskilled)- 2 Nos, and supervisor} should be available with necessary tools for cleaning of swimming pool such as suction sweeper,rope complete all as specified and directed. (ii) Water testing report before cleaning and after cleaning shall be submitted by the contractor on every maintenance day. (iii) Alum ferric, bleaching powder, TCC - 90, Copper Sulphate, Soda ash shall be measured and paid seperately under relavant items of schedule as supply only. (iv) Contractor should have minimum of 5 years of experience for the maintenance of swimming pool and should have produce the last 3 year attented work performance relevant documents as directed by Engr-in-Charge. (v) The contractor have to deployed a person with the testing kit for water to mix desired qty of chemical on daily basis. (Note:- Rate quoted by the contractor includes the wages of person for maintaing quality of water of swimming pool. (vi) The Contractor shall posses valid Certified Pool Operator Certificate from recognised Certified Pool Agency /Organisation. |
| 2 | Supply only following items for disinfection/treatment of Swimming pool/ Diving pool water as per requiremt and directed by Engineer in charge |
| 3 | Alum Crystal |
| 4 | Bleaching Powder |
| 5 | TCCA 90 |
| 6 | Copper Sulphate |
| 7 | Soda Ash |
| 8 | pool standard B23 algicide to remove green, black spot and mustard algae |
| 9 | M&L for disconnecting and taking down carefully Electric driven pumping set for Servising of following capacities from foundation, disconnecting suction and discharge water line for carrying out repair work of pump set, dismantling of pump set, cleaning, repair replacement of all unserviceable parts, reassembling complete pumping set, reinstalling , mounting and fixing on base channel on existing foundation and coupling properly to existing motor with proper balancing and alingment including recoupling of suction and discharge line, testing on full load for smooth functioning all as specified and as directed.Note: (i) Rates including minor spares like gland, grease, nut bolts , gaskets and packing materials major spares will be measured and paid separately and rate quoted shall be deemed to be included for fixing of new spares under these items. (ii) Contractor should visit site before quoting the rates. (iii) Cost of transportation shall be deemed to be included in the rate quoted for these items. (iv) While taking out pump for repairs , the contractor will make arrengement pluging suction and discharge line with dead flanges without extra cost, (v) The contractor shall repair and refix the pump set within three working days from the date of opening and making it functionable . |
| 10 | Pumping set suible for 10 HP |
| 11 | Suction sweeper pump 3 HP |
| 12 | pressure pump 2 HP |
| 13 | Supply only in repair bearing for the following capacities of pumps as directed incorporate in the Item Ser No 3 above all as specified and as directed:- |
| 14 | Pumping set suible for 10 HP |
| 15 | Suction sweeper pump 3 HP |
| 16 | pressure pump 2 HP |
| 17 | Supply only in repair Impellar (Cast Iron/Stainless steel/GM) , as per existing type for the following capacities of pumps as directed incorporate in the Item Ser No 3.00 above all as specified and as directed:- |
| 18 | Pumping set suible for 10 HP |
| 19 | Suction sweeper pump 3 HP |
| 20 | pressure pump 2 HP |
| 21 | Material and labour taking down carefully electric motor 3-phase 415v,50Hz,AC for Servicing from foundation/ coupling, transporting to civil workshop, opening the motor,Checking the insulation value of the windings, insulating the winding with same class of insulation varnish,Oiling Greassing of bearing and busing , painting with one coat of synthetic enamel paint as per color code and back to site for re-installing the motor and connecting to the pump, testing the motor for satisfactory performance all as directed by Engineer -in-Charge and all as specified for the following capacity. (Major Part will be Measured and paid in relevant Items of this schedule) |
| 22 | 10 HP |
| 23 | Supply only in repair of the following bearings required as directed |
| 24 | 10 HP |
| 25 | Supply and fix in rep terminal block made out from brass complete with backelite plate for the following capacities. |
| 26 | 10 HP |
| 27 | M & L for Dismantling and taking out of pump motor for Rewinding ,transporting the same work shop opening the motor, removing burnt winding and cleaning winding slots and rewinding of motor using suitable existing gauge/ size with supper enamelled copper wire, replacing insulation paper of class F and fire proof sleeves, varnishing, baking complete, oiling, greasing, replacing old rear/ front bearings with new and reassembling complete motor including testing at site all as directed by Engr- in -charge |
| 28 | 10 HP |
| 29 | Supply only suction sweeper consisting of the following:-(a) Heavy duty stainless steel SS 3.4 grade) vacuum head of size not less than 900mmx450mm with suitable best quality nylon brush, suitable rollars all as directed.(b) Heavy duty MS trolley with suitable heavy duty nylon wheels, handle for pulling suitable for housing and supply and fix mono block mud pump with 3 phase 3 HP motor, suitable DOL starter alongwith 100 M of 2.5sqmm 4 core flexible cable, duly coiled in and including suitable spool all as directed.(c) Nylon rope 25mm dia 40m longMake : Crompton or equivalent ISI marked |
| 30 | Supply only swimming Pool repair and Maintenance Equipments as mentioned here-in-under of makes listed in Appendix 'C' complete all as specified and directed by Engineer - in- Charge |
| 31 | PE extruded Vaccum Hose 30 Mtr x ½\\" |
| 32 | Ribbed Telescopic pole 0.8mm thick 2x2400mm |
| 33 | Shallow Net / deep bag leaf net with attach 5 feet pole |
| 34 | Curved Brush |
| 35 | 18\\" Standard Wall Brush (with aluminum handle) |
| 36 | Chlorine test kit with coloured ample complete with all testing fitments and OT solution in Rexene finish box |
| 37 | Electronic PH test kit. |
| 38 | M & L for painting of pump, motor complete set of capacity 5 HP to 10 HP with two coats of synthetic enamel paint after preparing surfaces and writing MES / SM Nos all as specified and directed by Engr-in-charge. |
| 39 | M & L for painting of CI / DI pipelines of any sizes in swimming pool at aundh Area complete with two coat of synthetic enamel paint after preparing surfaces and writing of Inlet/ Out let direction, Area of Feeding etc all as specified and directed by Engr-in-charge. |
| 40 | S&F in repairs MS ERW pipe 'C' class 150mm bore confirming to IS 1239 complete all as specified and directed |
| 41 | S&F in repairs MS ERW pipe 'C' class 100 mm bore confirming to IS 1239 complete all as specified and directed |
| 42 | Supply & fix in repair Unplasticised PVC pipes(UPVC) confirming to IS 4985:2000 of pressure rating 10 kgf /sqcm (including short lengths), with & including S&F necessary pipe fittings such as bends, elbows, unions, tees, reducing tees, adoptors, sockets, plugs, hose clips etc. and fixing to walls, ceilings or in floors etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good or laying in trenches complete all as specified & directed of following sizes:- |
| 43 | 250 mm dia |
| 44 | 200 mm dia |
| 45 | 160 mm dia |
| 46 | S&F in repairs cast iron butterfly valve 150 mm bore, ISI mark PN 1.6 complete all as specified and directed |
| 47 | S&F in repairs cast iron butterfly valve 100 mm bore ISI mark PN 1.6 complete all as specified and directed |
| 48 | S&F in repairs 3 pole power contact MNX 40 as per existing make: with NO & NC Contact required for starter of 10 HP motor complete all as specified and directed |
| 49 | S&F in repairs push button red/green required for motor starter complete all as specified and directed |
| 50 | S&F in repairs indicator lamp red, yellow, green required for pump motor panel complete all as specified and directed |
| 51 | S&F in repairs Voltmeter 0 to 300 Volt with selector switch( as per existing) complete all as specified and directed |
| 52 | S&F in repairs Ammeter 0 to 300 Amp with selector switch and CT ( as per existing) complete all as specified and directed |
| 53 | S&F in repairs MCB, 63 Amp (isolator), TPN, 415 Volts required for pump motor complete all as specified and directed |
| 54 | Supply and fixin repair PVC multistanded copper conductor cable of 4 Sqmm 3 core PVC insulated 1100 Volts grade ISI marked laidin PVC conduit pipe medium grade of dia 25mm fixed on wall/floor/trenches including all accessary all as directed by Engineer in Charge |
| 55 | S&F in repairs MCCB 3 pole 415 V fixed type 100 Amp with breaking capacity 25 KA complete all as specified and directed |
| 56 | S&F in repairs 4 sqmm cable lugs of suitable size complete all as specified and directed |
| 57 | S & F in replacement of Lamps for Under Water Light - 55 watts |
| 58 | M & L 3 core wire of 1.5 sqmm in repairs of Connection in connection box , cleaning of rust and rejoining the rites in connection box and control panel for all uw lights periodically |
| 59 | M & L for Polishing/Grinding/Cleaning of SS Ladders and SS Railing in the swimming pool complete all as specified and directed by Engineer -in-Charge |
| 60 | Repairs /Replacement of Floor Inlets Caps and removal of dust/debris from the pipes by removing covers and fittings of covers again |
| 61 | M & L for attending complaint of leakage of UPVC pipe inside the swimming pool & diving Pool in inlet or oulet pipe complete all as specified and directed by Engineer -in-charge Note: excavation returning and filling removal of soil is included in the quoted price no extra payment will be paid. Spare part which will used in repair deemed to be included in quoted price. |
| 62 | Testing of swimming pool water for the following parameter to safety of user to swim to be checked by Pool standard T19 by pool balance module (a) PH(b) Alkalinity(c) Chlorine(d) Stability(e) Hardness |
| 63 | Supply and fix in repair Star - Delta fully automatic ML 2 FASD for 10 HP Motor relay range 9-14 A in sheet steel enclosure ML Type Motor rating AC- 3 Duty ,415V , 50Hz, 3- Ph complete all as specified. Make : Schindier / Legrand / L&T / ABB |
| 64 | Supply and fix in repair colour grating patti suitable for drain of swimming pool complete all as specified and directed by Engineer-in-Charge |
| 65 | Supply and fix in repair suction sweeper trally wheel as per existing size complete all as specified and directed by Engineer-in-Charge |
| 66 | Supply and fix in repair only hose pipe 50mm for suction trolly all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
| 67 | Supply and fix in repair only hose pipe 50mm for suction trolly all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysSep 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender