Tender For Construction Of Rub (4.50M X 4.50 M) At Railway Chainage 193-7/8 (4/5) Of Sadulpur To Loharu Section Village R Ura
Tender Value
6.47 Crore
Estimated cost
Bid Submission
08 Sep 2026
4 days left
EMD
12.95 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Churu → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Rub (4.50M X 4.50 M) At Railway Chainage 193-7/8 (4/5) Of Sadulpur To Loharu Section Village R Ura
BOQ
| Sl. No. | Item Description |
| 1 | Construction of RUB (4.50m X 4.50 m) at railway chainage 193-7/8 (4/5) of Sadulpur to Loharu Section Village Rampura |
| 2 | Part -A-1 RUB Structure |
| 3 | Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil Upto 3 m depth |
| 4 | Earthwork in excavation for structures as per drawing and MoRTH specifications Clause 304.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil 3 m to 6 m depth |
| 5 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104 P.C.C grade M 10 Nominal mix 1:3:6 |
| 6 | Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings, strap beam, raft , bases of columns etc. |
| 7 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and MoRTH specifications Clause 1702, 1703, 2102 & 2104. R.C.C. grade M 25 |
| 8 | Plain/reinforced cement concrete in substructure complete as per drawings and MoRTH specification Clauses 1700 and 2200 R.C.C. grade M 25 |
| 9 | Supplying, fitting, and placing TMT bar reinforcement in superstructure complete as per drawing and MoRTH specifications Clauses 1009,1600 and 2302 |
| 10 | Fillling in foundation trenches as per drawing and MoRTH specification Clause 304.3.7.Sand filling |
| 11 | Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 602.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 31.5 mm, mixed in a concrete mixer of not less than 0.5 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed Side Formwork (steel channel, laying and fixing of 150 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using water finishing to lines and grade as per drawing and MoRTH Specification Clause 602 including vaccum dewatering process with all required equipments (Dowel Bars will be paid seprately) |
| 12 | Painting two coats including prime coat with epoxy paint of approved brand on concrete/steel surfaces after through cleaning of surface to give an even shade as per drawing and MoRTH Specification Clause 801 |
| 13 | Part-A-2 RUB items. |
| 14 | Casting ,supplying and transporting upto Bridge site within 50m, pre cast RCC box, base slabs, blast retainer, bed block, etc. of reinforced concrete slabs in M-35 design mix etc.as per approved drawings & design with contractor's own materials such as sand water, 6mm to 20mm well graded machine crushed stone aggregate,admixures etc.including machine mixing of all gradients,placing ,mechanical vibrating curing etc.and providing erecting and dismentaling of staging, centering,shuttering, form work,and providing AC/PVC pipes of approved sizes for weep holes/ drain pipes at spacing as decided by the Engineer -in-charge and handlingwith all lead, lift, depth ascent, doscent, octory, royalty and other texes, etc. including crossing of track, Nallaha, streams or any other obstruction, etc. complete as per instruction of Engineer-in-charge. Note : (i): Payment of steel used will be made seperately under relevant BSR item. (ii) the rates of items includes cost of mix design also.(iii)the rate of item includes the cost of cement also. |
| 15 | Installation of single/twin RCC box of all sizes with or without common web section including design of pushing scheme & pushing it in correct position and alignment below Railway track/Road following all measures of track safety by “Box pushing technique\\" as per approved drawings/scheme, with or without surcharge in all types of soils with disposal of surplus earth away from vent up to 1 Km, fixing arrangement for all services & utilities and all other incidental works to complete the ROB/RUB/Canal crossing in all respect as per specifications to the satisfaction of Engineer-in-Charge. Note: 1. The rate includes all items of work/supplies for complete job in all respects except of (i) main RCC Box; (ii) Thrust Bed; (iii) Footpath (iv) Parapet wall and (v) wearing Course. there which shall be paid extra under relevant items of PWD BSR.2. The payment for this item shall be made for the clear inner cross section area of the parent RCC Box/Boxes and barrel length i.e. clear inner volume of parent RCC Box/Boxes. Inner barrel Volume of Box 4.5x4.5x18.36=371.79 cum |
| 16 | supplying fabrication & erection of all steel member as per IS 800-1984 & other relevant IS code for shelter/height gauge comprising of welded trusses purlin, bracing. Post, girder, column,ladder, barring plate, gusset plate etc. on raising level platform & sheds including cost of providing bolts, nuts, washer & welding where required with lead, lift, ascent/decent as per approved make & as per RDSO design including priming coat of red oxide of approved engineer in charge and painting of two coat with synthetic/aluminum paint as a complete job including all taxes, lead, lift, ascent/decent, crossing of track as a complete job. For 2 Nos Height Guages |
| 17 | Insertion and taking out of temporary service girder of required length as per need of site below track in short duration traffic as per Railway approved drawing to provide temporary arrangement for box/excavation of hard rocky strata to make space for launching of RCC Box for launching of RCC components in sub sequent blocks, including making and laying sleeper cribs,bearing plate,dismantling&laying of track,cutting/filling of earth etc. as per standard drg. to make track fit for 20mphspeed, with contractor's own labour,crane,tools,and plants etc.Nothing extra will be paid to the contractor except the accepted rate,whatsoever. Please Enable Macros to View BoQ information |
| 18 | Insertion and taking out of temporary service girder of required length as per need of site below track in short duration traffic as per Railway approved drawing to provide temporary arrangement for box/excavation of hard rocky strata to make space for launching of RCC Box for launching of RCC components in sub sequent blocks, including making and laying sleeper cribs,bearing plate,dismantling&laying of track,cutting/filling of earth etc. as per standard drg. to make track fit for 20mphspeed, with contractor's own labour,crane,tools,and plants etc.Nothing extra will be paid to the contractor except the accepted rate,whatsoever. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender