Tender For Replacement Of Cfl Lights With Dali Dimmable Led Lights In Auditorium At Post Graduate Govt. College For Girls, Sector-42, Chandigarh.
Tender Value
17.71 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
7 days left
EMD
35425
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement Of Cfl Lights With Dali Dimmable Led Lights In Auditorium At Post Graduate Govt. College For Girls, Sector-42, Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | DSR item No. 1.17 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 2 | 3 x 1.5 sq. mm |
| 3 | DSR item No. 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 4 | 25 mm |
| 5 | DSR item No. 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). |
| 6 | 8 way (4 + 24), Double door |
| 7 | DSR item No. 39.17 Supplying, drawing, Installation, Testing and commissioning of CAT6 UTP LSZH 23AWG Twisted Pair Cable in existing conduit/ on surface, Category 6 Unshielded Twisted Pair, 4 pair should be complied as per UL/ETL verification program for compliance with ANSI/TIA-568.2-D standard. Outer diameter should be in the range of 6.1mm nominal with Operating Temperature Range: -5° to +60°C. Bending Radius: < 4 X Cable Diameter at –5°C ± 1°C and Pulling Force: 11.5Kg etc. complete as required. |
| 8 | 1 Run of cable |
| 9 | DSR item No. 8.1 LED Down lighter (SMD Type) (System lumen efficacy ≥ 105 < 120 lm/Watt ) (Please refer DNIT for complete specification of item no.05) |
| 10 | 12 -15 watt |
| 11 | DSR item No. 8.7 LED Panel light 2x2 ft.(System lumen efficacy ≥120 <135 lm/Watt) (Recess/ Surface type)(Please refer DNIT for complete specification of item no.06) |
| 12 | 36 watt |
| 13 | Supply installation testing commissioning of COB DALI dimmable Recess Down Light Fixture to be installed recess in false ceiling. The fitting should be Philips / Wipro/ Lighting Technologies /Bajaj make only. The job includes the cost of testing, commissioning and making connection with copper wire from adjacent light point. The job includes all labour and petty material required to install the fitting to the entire satisfaction of the EIC of work. The LED fittings should be as per following design criteria.(Please refer DNIT for complete specification of item no.07) |
| 14 | Supply installation testing commissioning of DALI dimmable Recess/ Surface 2’x2’ LED Light Fixture to be installed recess in false ceiling. The fitting should be Philips / Wipro/ Lighting Technologies /Bajaj make only. The job includes the cost of testing, commissioning and making connection with copper wire from adjacent light point. The job includes all labour and petty material required to install the fitting to the entire satisfaction of the EIC of work. The LED fittings should be as per following design criteria. (Please refer DNIT for complete specification of item no.08) |
| 15 | Supply installation testing commissioning of LED Flexible Strip to be installed in existing cove of false ceiling/ wooden design with suitable arrangement. The LED Strip should be Philips / Wipro/ Lighting Technologies /Bajaj make only. The job includes the cost of testing, commissioning and making connection with copper wire from adjacent light point. The job also includes the cost of electronics driver required for the LED Strip of the same make as mentioned for LED Strip. The LED fittings should be as per following design criteria.(Please refer DNIT for complete specification of item no.09) |
| 16 | Supply, installation, testing, and commissioning of a 6-Watt LED Step Light (recess type) with aluminum die- cast housing in powder-coated grey color and CCT 3000K, complete with an electronic driver. The job includestesting and commissioning to the satisfaction of the Engineer-in-Charge. The fitting should be of Philips / Wipro/ Lighting Technologies /Bajaj make only. The sample of the fixture mustbeapprovedbytheEngineer-in-Chargepriortosite installation. |
| 17 | Supply, installation, testing, and commissioning of KNX Bus Power Supply suitable for KNX/EIB intelligent building automation system, having input voltage range of 150–275 VAC, 50/60 Hz and providing Output-1 for KNX bus power supply of 30 V DC SELV, 320 mA with integrated choke for supplying and isolating the KNX bus line and Output-2 as additional auxiliary voltage output of 30 V DC SELV. (Please refer DNIT for complete specification of item no.11) |
| 18 | Supply, installation, testing, and commissioningof KNX 4/8 Button Keypad/Control Element suitable for KNX/EIB intelligent building automation system, configurable for multi-functional operation through ETS programming software. The keypad shall be capable of performing functions such as switching ON/OFF of lighting circuits, dimming control, curtain/blind open-close operation, scene recall and control, staircase lighting control and other programmable KNX automation functions as required. (Please refer DNIT for complete specification of item no.12) |
| 19 | Supply, installation, testing, and commissioningof Web-Based KNX AutomationController/Gateway for centralized monitoring, integration and control of all connected KNX devices on a single platform through a common user interface/application. The controller shall be capable of integrating and controlling lighting circuits, dimming modules, curtain/blind controls, HVAC systems, scenes, scheduling functions and other connected electrical loads within the KNX automation network. The controller shall support integrated IP, serial and infrared control in a compact single-unit design and shall be suitable for integration with mobile applications, touch panels, remote controls and web-based interfaces for centralized operation and monitoring. (Please refer DNIT for complete specification of item no.13) |
| 20 | Supply, installation, testing, and commissioning of KNX–DALI Gateway/Controller suitable for intelligent lighting automation system for integration of DALI lighting network with KNX/EIB building automation system. The gateway shall support control and monitoring of DALI electronic control gear/luminaires through KNX protocol and shall provide one complete DALI universe comprising 64 DALI addresses per control output. The controller shall be available with 1/2/3 DALI control outputs supporting full DALI universes of 64/120/192 addresses respectively, including backward channel communication for status feedback, fault monitoring and real-time control verification. (Please refer DNIT for complete specification of item no.14) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
TodayAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysAug 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender