Tender For Day To Day Maintenance Of Office Accommodation For Executive Engineer, Pmgsy Division, Jammu, Superintending Engineer, Pmgsy Circle, Jammu And Direction Office Pmgsy Jammu Alongwith Sub-Divisional Offices Of Pmgsy Sub-Division Jammu / Sub-Divis
Tender Value
18.03 Lakhs
Estimated cost
Bid Submission
29 Aug 2026
4 days left
EMD
36060
Bank guarantee accepted
Document Fee
800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Day To Day Maintenance Of Office Accommodation For Executive Engineer, Pmgsy Division, Jammu, Superintending Engineer, Pmgsy Circle, Jammu And Direction Office Pmgsy Jammu Alongwith Sub-Divisional Offices Of Pmgsy Sub-Division Jammu / Sub-Division Akhnoor.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: |
| 2 | 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | 1:4:8 or leaner mix (i/c equivalent design mix) |
| 4 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. |
| 5 | Demolishing brick work manually/by mechanical means including stacking of service- able material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in charge (In cement mortar). |
| 6 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in in foundation and plinth including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 7 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level. |
| 8 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :(Cement mortar 1:4 ( 1 cement : 4 coarse sand). |
| 9 | Extra for half Brick masonry in superstructure above plinth level upto floor V level. |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with : |
| 11 | 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size. |
| 12 | 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form work for: |
| 14 | Foundations, footings, bases for columns |
| 15 | Suspended floors, roofs, landings, balconies and access platforms. |
| 16 | Shelves (cast-in-situ) |
| 17 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 18 | Columns, pillars, piers, abutments, posts and struts |
| 19 | Edges of slabs and breaks in floors and walls |
| 20 | Under 20 cm wide |
| 21 | Above 20 cm wide |
| 22 | Weather shades, chajjas, corbels etc. including edges. |
| 23 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. |
| 24 | 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 25 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 26 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 27 | Steel reinforcement for R.C.C. work including straightening,cutting bending, placing in position and binding all complete upto plinth level. |
| 28 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
| 29 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second class deodar wood |
| 30 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class deodar wood. |
| 31 | Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete With stainless steel grade 304 wire gauge with wire of dia 0.50 mm 2nd class teak wood beading 62x19 mm |
| 32 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class deodar wood |
| 33 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge :Second class deodar wood |
| 34 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete. |
| 35 | Fixed to steel windows by welding |
| 36 | Fixed to openings / wooden frames with rawl plugs screws etc. |
| 37 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : 100x58x1.90 mm |
| 38 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. |
| 39 | 150x10 mm |
| 40 | 250x10 mm |
| 41 | Providing and fixing ISI marked oxidized M.S. sliding door bolts with nuts and screws etc. complete :(250x16mm) |
| 42 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : |
| 43 | 150x10 mm |
| 44 | 250x10 mm |
| 45 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 46 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete(Welded). |
| 47 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 48 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 49 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 40mm thick with 20 mm nominal size stone aggregate. |
| 50 | Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) . Medium shade using 50% white cement and 50% ordinary cement. |
| 51 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 52 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 53 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 54 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 55 | Providing and fixing tiled False Ceiling of specified materials of size 595x595mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms/sqm both side inclusive ) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200 x 600mm and secondary cross “T” of length 600mm and size 24x25 mm made of 0.30mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, wherever, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.8 mm spaced at 1200mm center to center along size 85x30x0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. (The rate is excluding the cost of tiles which will be paid for separately). 8 mm thick fully perforated Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with minimum compressive strength 225 kg/cm2, bending strength 100 kg/cm2, of size 595x595 mm, having perforation of dia. 10mm with minimum perforated area 18% with non-woven tissue on the back side, having an NRC (Noise Reduction Certificate) of 0.85, with 50 mm thick rock wool of 48 kg/cum backing. |
| 56 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or re-plastering, including disposal of rubbish to the dumping ground within 50 meters lead. |
| 57 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 58 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 59 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 60 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick |
| 61 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 62 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 63 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 64 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 65 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 66 | Providing and fix ng wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 67 | Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern W.C. pan of size 580x440 mm |
| 68 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete:10 liter capacity -White |
| 69 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe 32 mm dia |
| 70 | Providing and fixing 100 mm sand cast iron grating for gully trap. |
| 71 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing |
| 72 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
| 73 | Providing and fixing toilet paper holder of C P brass. |
| 74 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460mm bowl depth 200mm |
| 75 | Providing and Fixing C.P Brass fittings of approved make |
| 76 | C.P Pillar Cock Swan Neck |
| 77 | 15mm C.P brass Angle Valve for basin mixer and geyser points |
| 78 | 15mm C.P Long body Bib Cock |
| 79 | 15mm C.P Short body Bib Cock |
| 80 | C.P. brass long nose bib cock |
| 81 | C.P Towel Ring |
| 82 | C.P Water Spray Jet |
| 83 | Soap Dispenser |
| 84 | C.P Waste Coupling |
| 85 | PVC Connection pipe with brass union 30 cm length 15 mm nominal bore |
| 86 | PVC Connection pipe with brass union 45 cm length 15 mm nominal bore |
| 87 | PVC Connection pipe with brass union 60 cm length 15 mm nominal bore |
| 88 | 15 mm nominal bore of standard back type C.P.brass close hole basin mixer |
| 89 | 15mm C.P stop cock |
| 90 | C.P. Brass extension nipple (size 15mmx50mm) |
| 91 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore |
| 92 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 93 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including allCPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. |
| 94 | Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing |
| 95 | 15mm nominal outer dia pipes. |
| 96 | 20mm nominal outer dia pipes. |
| 97 | Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 98 | 15mm nominal outer dia pipes. |
| 99 | 20mm nominal outer dia pipes. |
| 100 | External work including trenching, refilling etc. |
| 101 | 15mm nominal outer dia pipes. |
| 102 | 20mm nominal outer dia pipes. |
| 103 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: |
| 104 | Internal work-Exposed on wall |
| 105 | 15 mm dia. nominal bore |
| 106 | 20 mm dia. nominal bore |
| 107 | Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: |
| 108 | 15 mm dia. nominal bore |
| 109 | 20 mm dia. nominal bore |
| 110 | Laying and fitting of G.I. pipes (all classes) complete excluding cost of pipes, fittings and Earth work. |
| 111 | 15 mm and 20 mm dia. G.I. pipes |
| 112 | 25 mm and 32 mm dia. G.I. pipes |
| 113 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) |
| 114 | 15 mm dia. nominal bore |
| 115 | 20 mm dia. nominal bore |
| 116 | 25 mm dia. nominal bore |
| 117 | 32 mm dia. nominal bore |
| 118 | 40 mm dia. nominal bore |
| 119 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing Tee, including cutting and threading the pipe etc. complete 25 to 40 mm nominal bore |
| 120 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. 19.26.1 With common burnt clay (non modular) bricks of class designation 7.5 |
| 121 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) |
| 122 | 15 mm nominal bore |
| 123 | 20 mm nominal bore |
| 124 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation,refilling the earth or cutting of wall and making good the same complete wherever required. |
| 125 | 15 mm nominal bore |
| 126 | 20 mm nominal bore |
| 127 | Providing and fixing following G.I accessories :- |
| 128 | G.I Elbow |
| 129 | G.I Socket |
| 130 | G.I Nipple |
| 131 | G.I Gate Valve |
| 132 | Providing and fixing following CPVC accessories :- |
| 133 | CPVC Elbow |
| 134 | CPVC Socket |
| 135 | CPVC Nipple |
| 136 | CPVC Gate Valve |
| 137 | CPVC Tank Nipple |
| 138 | Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :20.7.1.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 139 | Supplying and fixing C.I. cover without frame for manholes: 20.14.1 455x610mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg. |
| 140 | Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5kg. |
| 141 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring |
| 142 | Single socketed pipes |
| 143 | 75 mm diametre |
| 144 | 110 mm diametre |
| 145 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipesconforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. |
| 146 | Coupler |
| 147 | 75 mm |
| 148 | 110 mm |
| 149 | Single push fit coupler |
| 150 | 75 mm |
| 151 | 110 mm |
| 152 | Single tee with door |
| 153 | 75x75x75 mm |
| 154 | 110x110x110 mm |
| 155 | Single tee without door |
| 156 | 75x75x75 mm |
| 157 | 110x110x110 mm |
| 158 | Bend 87.5° |
| 159 | 75 mm bend |
| 160 | 110 mm bend |
| 161 | Shoe (plain) |
| 162 | 75 mm shoe |
| 163 | 110 mm shoe |
| 164 | Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 165 | 75 mm |
| 166 | 110 mm |
| 167 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. |
| 168 | Providing and fixing Blending and window blinds/curtans :- |
| 169 | Vertical blinds/fabric clinds |
| 170 | Zebra blinds |
| 171 | Roller blinds |
| 172 | Fabric curtaiins including complete fitting of curtains rods & clamps etc. |
| 173 | Engaging labour for Repair work,dismantliing/opening of old sanitary fiting. |
| 174 | Plumber |
| 175 | Helper |
| 176 | Engaging labour for Repairing of old cement concrete work. |
| 177 | Mason |
| 178 | Helper |
| 179 | Supply and fixing of following light fittings along with connections complete as required. |
| 180 | 10 watt LED Batten fitting 2 ft long including connections etc. as required |
| 181 | Surface mounted 18/20 watt LED batten to fitting 4 feet long |
| 182 | 34/36 watt Recess surface mounted LED luminarie with full diffuser |
| 183 | (size 600mm x 600mm) |
| 184 | Mirror light CFL fitting with 9/11W CFL lamp |
| 185 | Surface/recessed square/round LED panel 10/12 watt |
| 186 | Surface/recessed square/round LED panel 15 watt |
| 187 | Surface/recessed square/round LED panel 20 watt |
| 188 | Cove light |
| 189 | Supplying and fixing of ceiling fan of double ball bearing type 120mm sweep with 2.25 with mid condenser and downrod upto 1'-6\\"long on the ceiling fan book with necessary connection from ceiling rose to fan using twin core copper wire |
| 190 | Supplying and fixing of following sizes exhaust fan with metal blade comple- set on existing holes on wall with necessary connection from ceiling rose to fan using 2 core flexible copper wire |
| 191 | 225 mm sweep exhaust fan |
| 192 | 300 mm sweep exhaust fan |
| 193 | Supplying and fixing of fan hook(U hook) on ceiling with 4 nos. of anchor fastener on both ends with necessary bolts and nuts and masonry work as required. |
| 194 | Supplying and fixing up following sizes(oscillating type) wall mounting fan on wall with necessary connections 400 mm sweep wall mounting fan |
| 195 | Supplying and fixing of 400 mm sweep pedestal mounting fan including transporting,assembling and putting into service |
| 196 | Supplying and fixing for following rating 240/415 volts 'C' curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioning etc as required |
| 197 | SPN 40 Amp. |
| 198 | SPN 63 Amp. |
| 199 | TPN 40 Amp. |
| 200 | TPN 63 Amp. |
| 201 | Supplyng and fxing of following Electrical items :- |
| 202 | PVC Batten(Casing Caping) 1\\" |
| 203 | PVC Batten(Casing Caping) 3/4\\" |
| 204 | Deep Box |
| 205 | Fan Box |
| 206 | 5/6 Amp 3 pin top |
| 207 | 5/6 Amp 2 pin top |
| 208 | 15/16 Amp 3 pin top |
| 209 | Installation tape (ISI brand) |
| 210 | Electronic Step Type fan Regulator switch type |
| 211 | Electronic Step Type fan Regulator socket type |
| 212 | Ceiling Rose |
| 213 | 2.2/3/3.5 mid fan condenser |
| 214 | Angle/batten Holder |
| 215 | Providing and fixing of following electrical accessories for replacement as and when required during the contact period. 1200 mm x 36/40w fluorescent tube rod |
| 216 | Providing and fitting of LED bulbs |
| 217 | Supply and fixing of single phase of following rating self pumping priming for pumping water including connections etc. as required. |
| 218 | 0.5 HP |
| 219 | 1.0 HP |
| 220 | 2.0 HP |
| 221 | Supplying and fixing of change over switch of following rating |
| 222 | 32 Amp.SP |
| 223 | 63 Amp.SP |
| 224 | 63 Amp.FP |
| 225 | 100 Amp.SP |
| 226 | Supply and replacement of the suitable size and rating of the following parts in the storage water heater and making the geyser in good working condition. |
| 227 | Heating element |
| 228 | Thermostat with control |
| 229 | Assembly |
| 230 | Repair of Tank including dismantling and re-installation of geyser |
| 231 | Supplying,fixing & commissioning of Storage Water Heater(Geyser) of following capacity along with PVC Pipes etc.as required. |
| 232 | 25 Ltr |
| 233 | 35 Ltr |
| 234 | Overhauling the ceiling fan,supplying and replacing the same size and rating of bearing,condenser,cotter,pins,shackle insulator,twin core copper wire and other defective material required for making the fan in good working condition. The job includes dismantling of fan and reinstalling the same as required. |
| 235 | Rewinding of the following fans using enamel copper wire of required gauge varnishing,oiling greasing,etc.overhauling such as cleaning,replacement of same size and rating of bearing condenser,cotter pins,shackle,insulator twin core copper wire and other defective materials required for making the fan in good working condition.The cost should include the rebate of old enameled copper and material.The workmanship shall be grade A and up to the satisfaction of the Engineer in charge.Job includes dismantling fan and reinstalling the same as required. 1200mm/1400mm sweep ceiling fan |
| 236 | Rewinding of the following rating and phase motors for water lifting by using enameled copper wire of required gauge,varnishing,oiling greasing,etc. overhauling such as cleaning,replacement of same size and rating of bearing condenser,cotter pins,shackle,insulator twin core copper wire and other defect-ive materials required for making the motor in good working condition.The cost should include the rebate of old enameled copper and material.The workman- ship shall be grade A and up to the satisfaction of the Engineer in charge.Job includes dismantling motor and reinstalling the same after repair as required. |
| 237 | 1 phase(0.5 HP) motor |
| 238 | 1 phase(1 HP) motor |
| 239 | Supplying and Drawing of Cat-6 cable |
| 240 | Supply the Distilled water required for the Batteries |
| 241 | Supplying of Remote Bells |
| 242 | Supplying and fixing of Call Bell/Ding Dong Single phase |
| 243 | Supplying and fixing of followiing PVC Gang Box :- |
| 244 | One way(space for 1 No.5/6 Amp.switch) |
| 245 | Two way(space for 2 Nos.5/6 Amp.switches) |
| 246 | Three way(space for 3 Nos.5/6 Amp.switches) |
| 247 | Four way(space for 4 Nos.5/6 Amp.switches) |
| 248 | 1+1 way(space for 1 No.5/6 Amp.Switch + 1 No.5/6 Amp.Socket) |
| 249 | 2+1 way(space for 2 Nos.5/6 Amp.Switches + 1 No.5/6 Amp.Sockets) |
| 250 | 3+1 way(space for 3 Nos.5/6 Amp.Switches + 1 No.5/6 Amp.Sockets) |
| 251 | 4+1 way(space for 4 Nos.5/6 Amp.Switches + 1 No.5/6 Amp.Sockets) |
| 252 | 2+2 way(space for 2 Nos.5/6 Amp.Switches + 2 No.5/6 Amp.Sockets) |
| 253 | 3+2 way(space for 3 Nos.5/6 Amp.Switches + 2 No.5/6 Amp.Sockets) |
| 254 | 3+3 way(space for 3 Nos.5/6 Amp.Switches + 3 No.5/6 Amp.Sockets) |
| 255 | 1+1 way(space for 1 No.15/16 Amp.Switch + 1 No.15/16 Amp.Socket) |
| 256 | Supplying,laying,testing and commissioning of following sizes PVC Aluminum Cable including connections etc. as required. |
| 257 | 6 Sq.mm Twin core |
| 258 | 10 Sq.mm Twin core |
| 259 | 16 Sq.mm Twin core |
| 260 | 25 Sq.mm Twin core |
| 261 | 35 Sq.mm Twin core |
| 262 | Supplying,installation,testing and commissioning of following type of 150 AH to tubular batteries for inverters extra as required. (Note:- Rs.1800/Battery has be deduct for the scrap of old batteries from allotted rate in case of replacement of battery). With Warranty of 36 months full replacement |
| 263 | Supplying,installation,testing and commissioning of following type of inverters as required. |
| 264 | 1050 VA |
| 265 | 2000 VA |
| 266 | Repairing of following type of inverter by replacing PCB. |
| 267 | 800 VA to 1000 VA |
| 268 | 1400 VA to 2000 VA |
| 269 | Repairing of following type of inverter by repairing PCB. |
| 270 | 800 VA to 1000 VA |
| 271 | 1400 VA to 2000 VA |
| 272 | Charging of Single Battery including carriage from side of work to shop and again from shop to site of work after charging. |
| 273 | Charging of Double Batteries including carriage from side of work to shop and again from shop to site of work after charging. |
| 274 | Supply and fixing of following type LED type Street lights along with G.I/M.Sbracket including connections etc. as required |
| 275 | 45 watt |
| 276 | 70 watt |
| 277 | 90 watt |
| 278 | Supplying and fixing of 25 watt IP65 has aesthically appealing vintage LED post top suitable for Garden/Lawn/Gate light. |
| 279 | Supplying,installation,testing and commissioning of following type of water purifiers along with PVC connecting pipes as required. |
| 280 | Water Purifier HD (RO + UV) |
| 281 | Water Purifier (UV) |
| 282 | Servicing of following type of Water Purifiers as required :- |
| 283 | Water Purifier HD(RO +UV) by way of replacing of candles and membrane etc. |
| 284 | Water Purifier HD(UV) by way of replacing of candle carbon etc. |
| 285 | Wiring for light point/fan point/exhaust fan point/callbell point with 1.5 sq m.m FRLS PVC insulated copper conductor single core cable in Surface/recessed medium class PVC conduit with modular switch,modular plate suitable G.l. Box Earthing the point with 1.5 Sq.m.m FRLS PVC.insulated copper conductor single core cable etc. as required |
| 286 | Wiring for light/Power Plug with 2.4 Sq.m.m FRLS PVC insulator copper conductor single core cable in surface/recessed medium class PVC conduit along with 1 to 4 Sq.mm Conduit alongwith 1 No. 4 sq.m.m FRLS PVC Insulated copper conductor single core cable for loop earthing as required. |
| 287 | Wiring for circuit/sub main wiring along with earth wire the following sizes to FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required. |
| 288 | 2x1.5 sq.m + 1x1.5 Sq.m.m earth wire |
| 289 | 2x2.5 sq.m.m + 1x2.5 sq.m.mearth wire |
| 290 | 2x4 sq.m.m + 1x4 sq.m.m earth wire |
| 291 | 2x6 sq.m.m + lx6 sq.m.m earth wire |
| 292 | 4x10 Sq.m.m + 2x6 sq.m.m earth wire |
| 293 | Supply and fixing following size/modules G.I box along with modular base and cover plate for modular switches in recess etc. as required. |
| 294 | 1 or 2 Module (75mmx75mm) |
| 295 | 3 Module (100mmx75mm) |
| 296 | 4 Module (125mmx75mm) |
| 297 | 6 Module (200mmx75mm) |
| 298 | 8 Module (125mmx125mm) |
| 299 | 12 Module (200mmx150mm) |
| 300 | Supply installation testing and commisioning of XLPE insulated and PVC sheeted power cable of 1.1 kv grade of following size ground cable tray as per site condition as required. 240 Sq.m.mx3.5 core armoured |
| 301 | Supply,installation,testing and commisioning of 1.5 Ton split type Acs.(copper) hot & cold type of minimum capacity following sizes as detailed below, each unit must provide cooling & dehumidification be operatable via remote control, operate at 220-240 AC Supply with latest in Vogue features, Pvc. pipe for drain shall be supplied and fited complete with accessories such as bends, elbows, flexible connection.(Warrantee shall be provided for 12 months from date of installation). b) The compressor shall be warranted for 5 years from date of installation. |
| 302 | Supplying installation, testing and commissioning of 1.5 Tonne split type AC(copper). |
| 303 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ram- ming of bottoms lift upto 1.5 m, including getting out excavated earth and dis- posal of surplus excavated earth as directed: 25 meter beyond 1 m from cutting edge |
| 304 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 305 | Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 306 | Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil. |
| 307 | Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. |
| 308 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 309 | Removal of unhygienic materials (so classified by the site engineer) from design-ated sites and its disposal as per directions, all inclusive. |
| 310 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, |
| 311 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto1.75 sqm). |
| 312 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular actions/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) |
| 313 | For Fixed portionPolyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns) |
| 314 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).Polyester powder coated aluminum (minimum thickness of polyester powder coated 50 microns) |
| 315 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item. With float glass panes of 8 mm thickness (weight not less than 20.0 kg / sqm) |
| 316 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side. |
| 317 | Providing and fixing aluminum tubular handle bar 32mm outer dia,3.0mm thick & 2100 mm long with SS screw etc. complete as per direction of Engineer-in-charge. Polyester powder coated minimum thickness 50 micron aluminum tubular handle bar. |
| 318 | Providing and fixing Brass 100mm mortice latch and lock with 6levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 319 | Providing and fixing Anodized aluminum (Anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of Grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285 fixed with dash fastener of required dia and size (dash fastener to be paid separately). |
| 320 | Providing and fixing aluminum round shape handle of outer dia 100mm with SS screws etc. Complete as per direction of Engineer-in-charge. Polyester powder coated minimum thickness 50 micron aluminum. |
| 321 | Engaging labour for Repair work,dismantling work. |
| 322 | Mason |
| 323 | Carpenter |
| 324 | Electrician |
| 325 | Helper/Labour |
| 326 | Supply of Office Furnitures including all leads & lifts,taxes etc. complete. |
| 327 | Executive Office Chair |
| 328 | Visitors Chair |
| 329 | Executive L-Shaped Office table |
| 330 | Computer table/table |
| 331 | Supply of Water tank |
| 332 | Servicing of Air Conditioners including checking all types of connections etc. |
| 333 | Disposal of Surplus Malba by engaging Tipper/Trollies including lead & lift etc. |
| 334 | Carriage of materials by MT. |
| 335 | Sand for an avg. lead of 20 km |
| 336 | Stone agg.for an avg.lead of 20 km |
| 337 | Bricks at an avg.lead of 25 km |
| 338 | Providing and Fitting of Silent or Soundproof Generator Set for Divisional Office including loading and unloading etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender