Tender For Maintenance Of Pwd Quarter Building At Gonda Twisa Sub-Division During The Year 2026-27 / Sh - Civil Works.
Tender Value
23.98 Lakhs
Estimated cost
Bid Submission
01 Sep 2026
6 days left
EMD
47977
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhalai → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Pwd Quarter Building At Gonda Twisa Sub-Division During The Year 2026-27 / Sh - Civil Works.
BOQ
| Sl. No. | Item Description |
| 1 | SUB-HEAD : BRICK WORK |
| 2 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete: |
| 3 | In cement mortar 1:6 (1 cement : 6 fine sand). |
| 4 | SUB-HEAD : WOOD & PVC WORK |
| 5 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters. |
| 6 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 7 | Providing and fixing factory made door frame (single rebate) made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 60mm width & 30mm thickness and shall be fixed to wall as per instructions of Enginer-In-Charge using 100x8 sheet metal CSK screws. |
| 8 | Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm) stiffener frame insert & telescopic polymeric ‘L’ corners. The panel shall be filled with 3mm thick high- pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-in-charge, cover moulding shall be provided for covering fixing screws and elegant look.(for W.C. bathroom door shutter). |
| 9 | Providing and fixing 25mm thick pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete. |
| 10 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. |
| 11 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 12 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 fine sand : 6 graded stone aggregate 20mm nominal size) |
| 13 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 14 | 300 x 16 mm |
| 15 | 250 x 16 mm |
| 16 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 17 | 300 x 10 mm |
| 18 | 200 x 10 mm |
| 19 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: |
| 20 | 125 mm |
| 21 | 100 mm |
| 22 | Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.Twin rubber stopper |
| 23 | Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. |
| 24 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete : |
| 25 | 100 × 58 × 1.90 mm |
| 26 | SUB-HEAD : STEEL WORK |
| 27 | Providing structural steel work riveted, bolted or welded in built up sections, russes and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 28 | SUB-HEAD : FLOORING WORK |
| 29 | Providing and laying 1st class quality vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 -2017, of approved make,in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etcall complete as per direction of the Engineer-in-charge.. |
| 30 | Double charged Stainfree vitrified tiles (Glossy) - Size of tile 600 mm x 600 mm |
| 31 | SUB-HEAD : FINISHING WORK |
| 32 | 12 mm cement plaster of mix |
| 33 | In cement mortar 1 : 6 (1 cement : 6 fine sand) |
| 34 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : |
| 35 | New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 36 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture [Payment shall be made after ubmission of Test Certificate issued by the Manufacturer] : |
| 37 | New work ( two or more coats applied @ 3.84 kg/10 sqm) |
| 38 | Applying priming coat: [Payment shall be made after submission of Test Certificate issued by the Manufacturer] |
| 39 | With ready mixed Pink or Grey primer of approved brand and manufacture on wood work (hard & soft wood). |
| 40 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: |
| 41 | Two or more coats on new work |
| 42 | SUB-HEAD : DISMANTLING & DEMOLISHING WORK |
| 43 | Dismantling old plaster or pointing, raking out joints, cleaning and preparing the surface for re plastering or re-pointing including disposal of rubbish to the dumping ground with all leads and lifts etc.complete as per direction of the Engineer- in charge. |
| 44 | Demolishing brick work including stacking of serviceable materials and disposal of unserviceable materials with all lifts and upto a lead of 50m etc. complete as per direction of the Engineer- in-charge: |
| 45 | In cement mortar. |
| 46 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 47 | Of area 3 sqm and below. |
| 48 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 49 | For thickness of tiles 10 mm to 25 mm |
| 50 | SUB-HEAD : WATER PROOFING AND REHABILITATION WORK |
| 51 | Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with : |
| 52 | Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 53 | SUB-HEAD : SANITARY INSTALLATIONS |
| 54 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 55 | W.C. pan with ISI marked white solid plastic seat and lid |
| 56 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 57 | 10 litre capacity-White |
| 58 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings: |
| 59 | Flat back wash basin of size 550x400 mm. |
| 60 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 61 | Semi rigid pipe32 mm dia |
| 62 | Flexible pipe32 mm dia |
| 63 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 64 | Providing and fixing soil, waste and vent pipes : |
| 65 | 100 mm dia Sand cast iron S&S pipe as per IS: 1729. |
| 66 | Providing and fixing double equal junction of required degree with access door,insertion rubber washer 3 mm thick, bolts and nuts complete : |
| 67 | 100 x 100 x 100 x 100 mm Sand cast iron S&S pipe as per IS: 1729. |
| 68 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 69 | 100 x 100 x 100 mm Sand cast iron S&S pipe as per IS: 1729. |
| 70 | Providing and fixing single equal plain junction of required degree |
| 71 | 100 x 100 x 100 mm Sand cast iron S&S pipe as per IS: 1729. |
| 72 | Providing and fixing sand cast iron S&S offsets as per IS: 1729 |
| 73 | 152 mm off set With 100 mm dia pipe |
| 74 | SUB-HEAD : WATER SUPPLY |
| 75 | Providing and fixing brass bib cock of approved quality: |
| 76 | 15 mm dia nominal bore |
| 77 | Providing and fixing brass stop cock of approved quality: |
| 78 | 15 mm dia nominal bore |
| 79 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end): |
| 80 | 25 mm dia nominal bore |
| 81 | Providing and fixing gun metal non-return valve of approved quality (screwed end): |
| 82 | 32 mm nominal boreVertical |
| 83 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clampsat 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete asper direction of Engineer in Charge. |
| 85 | Internal work - Exposed on wall15 mm nominal outer dia. Pipes. |
| 86 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings and clamps, including cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge. |
| 87 | Internal work - Exposed on wall15 mm dia. nominal bore |
| 88 | Providing and fixing G.I. pipes of medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling etc. complete as per CPWD specification and direction of the Engineer - in - charge. |
| 89 | External work20 mm dia. nominal bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 01, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender