Drinking Water Supply and Sanitation Government Departments Closing in 1 days TDR #57161339

Tender For Construction Of Six Seater Toilet In Mahatma Gandhi Middle School, Mango, Jamshedpur Under D.W.& S. Division, Jamshedpur.(Gr-Ii)

Issued by Government Departments · East Singhbum, Jharkhand
Tender Value
10.03 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
1 days left
EMD
20100
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
East Singhbum → Jharkhand
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Construction Of Six Seater Toilet In Mahatma Gandhi Middle School, Mango, Jamshedpur Under D.W.& S. Division, Jamshedpur.(Gr-Ii)

BOQ

Name of Work:- Construction of Six Seater Toilet in Mahatma Gandhi Middle School, Mango, Jamshedpur under D.W.& S. Division, Jamshedpur.(GR-II)
Sl. No. Item Description
1Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.
2Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B)
3Earth filling in foundaion trenches and plinth in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)
4Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume)
5Providing designation 75A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I.
6Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of cleanBelow plinth Outer Portion
7Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size)
8Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
9Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.
10Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
11Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns Pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering & finishing and reinforcement : 1:1.5:3cement: 1.5 coarse sand(zone-l):3 graded stone aggregate 20 mm nominal size)
12Centring and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts
13Reinforded cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajas, lintels, bands, plain window sills, staircases and spiral stair cases Jabove plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 cement: 1.5 coarsesand(zone-l):3 graded stone aggregate 20 mmnominal size).
14Centring and shuttering including strutting, propping etc. and removal of form for lintel, beams, plinth beams, griders, bressumers and contilevers with water proof ply 12mm thick
15Centring and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform. 12mm thick
16Providing designation 75A brick work in C.M( 1:6 ) in superstructure with approved quality of clean coarse of EM 2 to 2.5 inlucing providing 10 mm thick mortar Joints,costs of screering.materials scaffolfing raking out joints to 15 mm depth curing axes and royalty Jalt completeas per building specification and direction or E/I
17Providing designation125mm thick reinforced designation 75A brick work in C.M( 1:4 ) in superstructure with approved quality of clean coarse of EM 2 to 2.5 inlucing providing 10 mm thick mortar Joints,costs of screering.materials scaffolfing raking out joints to 15 mm depth curing axes and royalty Jalt completeas per building specification and direction or E/I
18providing Tor steel reinforcement of 8mm dia as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) 8mm dia bar@30%
1910mm dia bar@40%
2012mm to 16mm dia bar@30%
21Supplying fitting and fixing 20 gauge G.C.I. Sheet gate fitted on M.S. Angle frame of size 60x60x6mm. Including cost of fabrication providing necessary locking arrangement with Haskell and downy duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction E/I.
22Providing two coats of synthetic enamel paint of approved shade and make over steel surface throughly,scaffolding and taxes all papering including cost of scaffolding and taxes all complete as per building specification & direction of E/I. BCD-5.8.45
23Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.
24Providing and laying rectified glazed ceramic floor tiles of size 300x300mm or more (thickness to be specified by the manufacturer ) of 1st quality conforming to IS : 15622 of approved make in clours white, ivory,grey , fume red brown , laid on 20mm thick cement mortar 1:4(1cement:4 coursee sand ), jointing with greycement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete.
25Providing 12mm thk. Cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.
26Providing 6mm thk. Cement plaster (1:4) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I.
27Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm
28Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (same as item no.19 above)
29Providing two coats of plastic emulsion paint of approved shade and make over old surface including washing, cleaning,and preparring the wall,scaffolding,washing of floor and taxes all complete as per building specification & direction of E/I.
30Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
31Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.
32Supplying materials and labour for constructing inspection chamber of designation class 75B brick size 750mm deep, 600 x 450 mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600x475mm G.I. cover with frame ( weight not less than 36 kg) alongwith earth work in excavation and 80mm thick P.C.C. (1:3:6) in foundation and refilling all complete as per specification and direction of E/I.
33Carriage:
34bricks (8km)
35sand (5km)
36chips (20km)
37SANITARY, WATER SUPPLY & PLUMBING WORK
38Providing and fixing Chlorinated polyvinyl ( CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing this includes jointing of pipes & fittings with one step CPVC solvent cement and cost of cutting chases and making good the same uncluding testing of jonts complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the walls etc. i)15 mm nominal outer dia
39ii) 20 mm nominal outer dia
40Supplying fittings and fixing the following items complete with all materials as per specification and direction of E/I. Mirror ( 600 x 450 mm )
41Supplying fitting and fixing of Special type of C.P. Bath room fittings i) pillar cock
42Bib cock
43Angular stop cock
44Soap Dish
45Supplying fitting and fixing vitreous white glazed earthen ware wash hand basin or Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. brass waste 15 mm dia C.I. body brass spindle stop cock of approved quality of weight not less then 350 grms, 32 mm P.V.C. waste pipe 750 mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I.
46Supplying fitting and fixng vitreous white glazed earthen ware I.W.C. of Parry or Hindustan or any other I.S.S. approved make with 100 mm H.C.I. 'P' trap 15 litres C.I. pull and let go flushing cisten of names or other I.S.S. equivalent make, complete with all fittings C.I. or C bracket 32 mm alkathene/P.V.C. telescopic flush pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less then 50 grms, 15 mm P.V.C. connection pipe 450 mm long and the exposed pipe and cisten with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.A(c) with 10 ltr low level PVC Cistern
47Supplying, fitting and fixing vitreous white glazed earthen ware indian squatting type 600x350mm urinal plate of parry, Hindustan or any other I.S.S. approved make with internal flushing rim, 100mm white glazed earthen ware channelabout 1m. long 5litre capacity C.I. automatic flushing cistem of reliance or any other approved make with fittings R.S. or C.I. brackets 15mm and 45 cm long PVC / Alkathene pipe standard G.I. flush pipe for backand front with spreader fittings and brass coupling etc. 15 mm C.I. Body'brass spindle stop cock weight not less than 450 grams. all complete including painting of exposed parts with 2 coats of approved paint over a coat of red oxideprimer and cutting the wall and floor and making good the same as per soecification and direction of E/I 600mmx 350mm size (Large)
48Partition plate for urinal 25\\" x 13\\" size of ISI Mark
49Supplying fitting and fixing Polythene water storage tank of mark with cover and suitable locking system in double layer confirming to IS : 12701-1996 with latest revision.....all complete job.
50Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75mm dia
51110mm dia
52Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap thermal expansion.
53Single Tee With Door
5475x75x75mm
55110x110x110mm
5675mm bend
57110mm bend
58Single Tee Without Door
5975x75x75mm
60110x110x110mm
61Electrification Work
62Wiring in existing conduit: Supplying and drawing following sizes of FR PVC insulated copper conductor single core cable in existing surface / recessed steel / PVC Conduit including dismantling as required 3x1.5sqmm
63S/F PVC conduit: Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required.20mm
64Point wiring in PVC conduit, with piano type switch: Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC Insulated copper conductor single core in surface/recessed PVC conduit, piano type switch, phenolic laminated sheet with suitable size PVC/MS box etc as required. (Group B
65Supplying and fixing of following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps, one way switch
66Supplying and fixing following size/ modules, G.I. box alongwith modular base & cover plate for modular switches in recess etc as required. 4/5 module (78mm x 140mm x 50mm)
67Supplying fitting and fixing of LED Batten (20/22 W) ...do...do...all complete job. LED Batten (20/22 W)
68Supplying fitting and fixing of 15/16 watt LED Bulb ...do...do...all complete job. 15/16 watt LED Bulb
69Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, power painted including earthing etc. as required. (But without MCB/RCB/Isolator)
70Supplying and fixing suitable G.I. box with modular plate and cover in front on surface of in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch connection, painting etc. as required (For light plugs to be used in non residential building)
71Supplying and fixing 2 pin 5 amp. Ceiling rose on the existing junction box/wooden block including connection etc. as required
72Construction of Septic Tank
73Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M including all lifts levelling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I
74Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per buy lading specification and direction of E/I (Mode of measurement compacted volume).
75Providing designation 75B one Brick flat soling as per building specification and direction of E/I
76Providing and laying in position cement concrete of specific grade excluding the cost of centring and shuttering - All work up to plinth level: 1:2:4 (1cement:2coarse sand(zone III) : 4 graded stone aggregate 20 mm nominal size)
77providing designation 75 B brick work in c.m (1:6)in foundation and plinth as per building specification and direction of E/I
78Providing 12mm thick cement plaster (1:6) as per building specification and direction of E/I
79Providing R.C.C. M - 200 with nominal mix of (1:1.5:3) s per building specification and direction of E/I.
80Centring and shuttering including strutting, propping etc and removal of form for Suspended floors roofs landing balconies and access platform
81Providing tor steel reinforcement of 10mm, 12mm & 16mm dia bars as per approved deign and drawing as per building specification and direction of E/I
82Construction of Soak Pit
83Earth work excavation in the foundation trenches -do-all complete job as per specification and direction of E/I.
84Providing Coarse Clean Sand filling in the Foundation trenches including Cost of watering -do-all complete job as per specification and direction of E/I.
85Providing designation 75- B Brick Flat Soling And joints Filled with local Sand -do-all complete job as per Specification and direction of E/I.
86Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I
87Providing P.C.C. M-15 with nominal mix of Conc.(1:2:4) on the foundation and capping -do-all complete job as per specification and direction of E/I.
88Providing 12 mm thicks cement plaster with (1:6) cement mortar with 1.5 mm thick neat cement punning -do-all complete job as per specification and direction of E/I.
89Providng R.C.C. M-150 with nominal mix of Conc. 1:2:4 for construction of cover sleves -do-all complete job as per specification and d irection of E/I.
90Providing tor steel reinforcement with cutting bending and fixing -do-all complete job as per specification and direction of E/I.
91Providing Brick Bats in the Sock Pit For Socking Water -do-all complete job as per Specification and direction of E/I.
92Providing D-Handel made of 16 mm wide and 6 mm thick aluminium flat -do-all complete job as per specification and direction of E/I.
93Carriage of Materials
94Cement+Steel-10 km
95Sand-20 km
96Chips-20 km
97Bricks-10 km
98GST 18%
99Labour Cess 1% Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 57161339
AUTHORITY Government Departments
TENDER VALUE 10.03 Lakhs
LAST DATE 31-08-2026
Authority
Authority Name Drinking Water And Sanitation Department
Work Description Tender for Construction Of Six Seater Toilet In Mahatma Gandhi Middle School, Mango, Jamshedpur Under D.W.& S. Division, Jamshedpur.(Gr-Ii)
Basic Detail
Tender No 05/2026-27 Dt.18.08.2026
Bidding Type Tender
Location
City East Singhbum
State Jharkhand
Key Dates
Publish Date 24 Aug 2026
Submission Date 31 Aug 2026
Open Date 01 Sep 2026
Finance
Tender Value 10.03 Lakhs
Tender Fee 2500
EMD 20100
Exemption Available
Document List
BOQ_159264.xls
f047449f-002a-48c8-b8b8-c5e42472bc1e.html
GRII.pdf
Tendernotice_1 (20).pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Aug 24, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Aug 31, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Sep 01, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_159264.xls

html

f047449f-002a-48c8-b8b8-c5e42472bc1e.html

pdf

GRII.pdf

pdf

Tendernotice_1 (20).pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders