Tender For Construction Of R.I Office-Cum-Residence Building At Mahulpali Of Barpali Tahasil In The Bargarh District
Tender Value
56.47 Lakhs
Estimated cost
Bid Submission
05 Sep 2026
10 days left
EMD
56472
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of R.I Office-Cum-Residence Building At Mahulpali Of Barpali Tahasil In The Bargarh District
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge. |
| 2 | Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete. |
| 3 | Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth. |
| 4 | R R H G Stone masonry in cement mortar 1:6 in foundation & plinth including cost carriage royalty taxes of all materials required for the work. |
| 5 | Brick masonry in C.M ( 1:6 ) using Fly ash Bricks of approved size of 25x 12 x 8 cm in Foundation and Plinth . |
| 6 | Brick masonry in C.M ( 1:6 ) using Fly ash Bricks of approved size of 25x 12 x 8 cm in Superstructure including splays cutting , circular moulding etc complete . Ground Floor |
| 7 | Brick masonry in C.M ( 1:6 ) using Fly ash Bricks of approved size of 25x 12 x 8 cm in Superstructure including splays cutting , circular moulding etc complete . First Floor |
| 8 | Brick masonry in C.M ( 1:6 ) using Fly ash Bricks of approved size of 25x 12 x 8 cm in Superstructure including splays cutting , circular moulding etc complete . Second Floor |
| 9 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (A) Column Base & Grade Beam :- |
| 10 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (B) Column in Superstructure Ground Floor |
| 11 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (B) Column in Superstructure First Floor |
| 12 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (B) Column in Superstructure Second Floor |
| 13 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (C) Plinth Beam |
| 14 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (D) Stair case Ground Floor |
| 15 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (D) Stair case First Floor |
| 16 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (E) Lintel Ground Floor |
| 17 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (E) Lintel First Floor |
| 18 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (E) Lintel Second Floor |
| 19 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C Ground Floor |
| 20 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C First Floor |
| 21 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (G) Roof beam Ground Floor |
| 22 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (G) Roof beam First Floor |
| 23 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (H) Roof slab Ground Floor |
| 24 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (H) Roof slab First Floor |
| 25 | R.C.C M-25 grade concrete using 20mm down graded chips of approved quality including hoisting , lowering & laying concrete as per direction of E.I.C (H) Roof slab Second Floor |
| 26 | Supplying , providing & fixing HYSD bars / Reinforcement conforming to grade Fe-500 including cutting , bending & binding and tying the grills and placing in position for R.C.C Works . Ground Floor |
| 27 | Supplying , providing & fixing HYSD bars / Reinforcement conforming to grade Fe-500 including cutting , bending & binding and tying the grills and placing in position for R.C.C Works . First Floor |
| 28 | Supplying , providing & fixing HYSD bars / Reinforcement conforming to grade Fe-500 including cutting , bending & binding and tying the grills and placing in position for R.C.C Works . Second Floor |
| 29 | Supplying and fixing MS doors and windows with M.S. window grills of any approved drawing & design including cost, conveyance and taxes etc. complete. Ground Floor |
| 30 | Supplying and fixing MS doors and windows with M.S. window grills of any approved drawing & design including cost, conveyance and taxes etc. complete. First Floor |
| 31 | Supplying and fixing MS doors and windows with M.S. window grills of any approved drawing & design including cost, conveyance and taxes etc. complete. Second Floor |
| 32 | Labour for fitting, fixing MS doors and windows with M.S. window grills of any approved drawing & design including cost, conveyance and taxes etc. complete. Ground Floor |
| 33 | Labour for fitting, fixing MS doors and windows with M.S. window grills of any approved drawing & design including cost, conveyance and taxes etc. complete. First Floor |
| 34 | Labour for fitting, fixing MS doors and windows with M.S. window grills of any approved drawing & design including cost, conveyance and taxes etc. complete. Second Floor |
| 35 | 20mm thick cement plaster (1:6) over brick work finished smooth including racking out the joints , watering & curring , cost ,conveyance and taxes etc complete . |
| 36 | 12mm thick cement plaster (1:6) over brick work finished smooth including racking out the joints , watering & curring , cost ,conveyance and taxes etc complete . Ground Floor |
| 37 | 12mm thick cement plaster (1:6) over brick work finished smooth including racking out the joints , watering & curring , cost ,conveyance and taxes etc complete . First Floor |
| 38 | 12mm thick cement plaster (1:6) over brick work finished smooth including racking out the joints , watering & curring , cost ,conveyance and taxes etc complete . Second Floor |
| 39 | 16mm thick cement plaster (1:6) over brick work finished smooth after racking out the joints including watering & curring etc complete . Ground Floor |
| 40 | 16mm thick cement plaster (1:6) over brick work finished smooth after racking out the joints including watering & curring etc complete . First Floor |
| 41 | 16mm thick cement plaster (1:6) over brick work finished smooth after racking out the joints including watering & curring etc complete . Second Floor |
| 42 | 12mm thick cement plaster in cm (1:4) with punning |
| 43 | Providing and fixing Vitrified tiles on floors , Treads of steps & landings of size 600x 600mm of premium grade conforming to IS- 13756 over a bed of cement mortar ( 1:1 ) etc complete . Ground Floor |
| 44 | Providing and fixing Vitrified tiles on floors , Treads of steps & landings of size 600x 600mm of premium grade conforming to IS- 13756 over a bed of cement mortar ( 1:1 ) etc complete . First Floor |
| 45 | Providing and fixing Vitrified tiles on walls , Treads of steps & landings of size 600x 600mm of premium grade conforming to IS- 13756 over a bed of cement mortar ( 1:1 ) etc complete . Ground Floor |
| 46 | Providing and fixing Vitrified tiles on walls , Treads of steps & landings of size 600x 600mm of premium grade conforming to IS- 13756 over a bed of cement mortar ( 1:1 ) etc complete . First Floor |
| 47 | Providing and fixing Chequered tiles in floors of 300x 300mm size of approved quality over a bed of cement mortar ( 1:1 ) etc complete . Ground Floor |
| 48 | Providing and fixing Chequered tiles in floors of 300x 300mm size of approved quality over a bed of cement mortar ( 1:1 ) etc complete . First Floor |
| 49 | Finishing wall surface of walls with Acrylic wall putty ( water based ) of approved make including cost of all labour , materials etc complete Ground Floor |
| 50 | Finishing wall surface of walls with Acrylic wall putty ( water based ) of approved make including cost of all labour , materials etc complete First Floor |
| 51 | Priming 1coat with any approved WALL CEMENT primer on plastered surface Ground Floor |
| 52 | Priming 1coat with any approved WALL CEMENT primer on plastered surface First Floor |
| 53 | Priming 1coat with any approved WALL CEMENT primer on plastered surface Second Floor |
| 54 | Distempering two coats with any approved shade to inside wall surface and ceiling including cost of distemper etc complete . Ground Floor |
| 55 | Distempering two coats with any approved shade to inside wall surface and ceiling including cost of distemper etc complete . First Floor |
| 56 | Distempering two coats with any approved shade to inside wall surface and ceiling including cost of distemper etc complete . Second Floor |
| 57 | Finishing wall with Weather coats of approved shade on new work two coats to give even shade including cost, conveyance, taxes with all labour and T&P required for the work etc. complete as per direction of the EIC. Ground Floor |
| 58 | Finishing wall with Weather coats of approved shade on new work two coats to give even shade including cost, conveyance, taxes with all labour and T&P required for the work etc. complete as per direction of the EIC. First Floor |
| 59 | Finishing wall with Weather coats of approved shade on new work two coats to give even shade including cost, conveyance, taxes with all labour and T&P required for the work etc. complete as per direction of the EIC. Second Floor |
| 60 | Painting two coats to Doors & Windows with synthetic enamel paint over a coat of primer with any approved shade including cost of paint etc complete . Ground Floor |
| 61 | Painting two coats to Doors & Windows with synthetic enamel paint over a coat of primer with any approved shade including cost of paint etc complete . First Floor |
| 62 | Painting two coats to Doors & Windows with synthetic enamel paint over a coat of primer with any approved shade including cost of paint etc complete . Second Floor |
| 63 | Labour for fitting fixing Big six trafford GCI / A.C. sheet of roof including fixing of ridge including cost of AC sheet etc complete Ground Floor |
| 64 | Iron work wrought and put up in trusses including cost of all labour , material etc complete including 1 % cess. Ground Floor |
| 65 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr. C/C and stainless square pipe barracking of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. Ground Floor |
| 66 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @0.90mtr. C/C and stainless square pipe barracking of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect. First Floor |
| 67 | Providing and fixing in position 50mm, thick precast cement concert' jally [1:2:4] hard granite chips including roughening, cleaning, fixing and finishing in cement mortar (1:3) etc., complete (Page No. 27 of 2014 Post GST) Ground Floor |
| 68 | Providing and fixing in position 50mm, thick precast cement concert' jally [1:2:4] hard granite chips including roughening, cleaning, fixing and finishing in cement mortar (1:3) etc., complete (Page No. 27 of 2014 Post GST) First Floor |
| 69 | Providing Cement concrete (1:2:4) in foundation using 12mm size BHCB chipps |
| 70 | Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire - Polycab/Finolex/ L&T / Anchor / Havells / V Guard/ KEI/ Great White) Modular Type -do- (Gr.A) (1.1.1-1.24.2) |
| 71 | Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. Group B 1.17.2 |
| 72 | Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. Group C 1.17.3 |
| 73 | Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. S/F of M.s. Box for 2 module 18 swg |
| 74 | Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. S/F of M.S. Box for 4 Module 18 swg |
| 75 | Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. S/F of M.S. Box for 6 Module 18 swg |
| 76 | Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. S/F of M.S. Box for 12 Module 18 swg |
| 77 | Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. S/F of 5 amp switch and 5A. Socket outlet of ISI marked on existing board (1.25.1 + 1.25.4) modular type |
| 78 | Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. S/F of metal box of 6 Module modular box in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amp. Socket out let 5/6amp. Piano type switch,connection,painting etc. as required (1.26) Modular type |
| 79 | Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. S/F of 3 pin 15/16 amp. Socket out let 15/16 amp. Piano type switch,connection, painting etc. as required(1.25.3+1.25.5) Modular type |
| 80 | Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Equivalent) |
| 81 | Recessed wiring to light point/fan point/exhaust point/call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. S/F of 15A Socket on 2 module for AC |
| 82 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in existing conduit as required (make of wire-Finolex/L&T/Anchor/Havels/V-Guard).2x1.5 sqmm + 1 x 1.5 sqmm(1.8.1) |
| 83 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in existing conduit as required -do- 2 x 2.5 sqmm + 1 x 1.5 sqmm (1.8.2) |
| 84 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in existing conduit as required -do- 2x4 sqmm + 1 x 1.5 sqmm (1.8.3) |
| 85 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in existing conduit as required -do- 2x6 sqmm + 1 x 2.5 sqmm (1.8.4) |
| 86 | Wiring for circuit/sub main alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in existing conduit as required Invertor wiring (1x 1.5 sqmm) copper wire (1.19.1) |
| 87 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) |
| 88 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) S/F of MCB 8 Way Double Door (2.3.5) |
| 89 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) S/F of 32A C Curve DP MCB (Make: Havells /Equivalent) |
| 90 | S/F of 5 to 32 Amp rating 240 Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution Board ISI marked complete with connection, testing and commissioning etc. as required (2.6.1) S/F of 2 way single door (2.3.1(b)) |
| 91 | Supply, Installation and commissioning of 63 Amp. I.C.D.P. Main Switches (Sl.No. 1502) (IS 13940 Part 3/ 1993) on existing surface complete with H.R.C. fuse links, interconnections, earthing etc. as requiredas per direction of Engineer in- charge (Make Siemens/ HPL/Anchor/L&T/ Havels/ C&S/ R,K,) 2.15.1A with MS box of 250mm x 300mm x60mm 1.24.16 |
| 92 | S/F of M.S. Box with phenolic laminated sheet of following sizes 200x300x100 (1.24.12) |
| 93 | S/F Call bell/Buzzer ISI marked suitable for DC/AC single Phase 230 volts complete as required.(1.30) |
| 94 | Supply of 180 mm x 100 mm x 60mm deep (1.24.5) for fixing call bell |
| 95 | S/F of batten holder BK angle holder ISI marked including connection etc. insulated of ceiling rose(1.29- 1.28) |
| 96 | S/F of computer board consisting of 3 nos. of 5 amp plug and switch and 1 no mini MCB and Indicator complete with wiring on 12 module M.S.box with B.k.cover |
| 97 | Earthing with G.I. earthpipe 3 mtr long. including accessories and providing masonary with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required.(3.2 +3.3) |
| 98 | Supply andlaying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 99 | S/F of Fan hook ( M-22) |
| 100 | S/F of step type modular fan regulator |
| 101 | Supply of instalation, Testing commissioning of 13 Watt. LED bulb |
| 102 | S/F of 300 Exhaust fan with all accessoriesand connections (Make Usha-Aero Clean Plus DBB/ Polycab-Fresh on DBB/ Cropmton-Trans Air12\\" reversible/ Havells-Ventil Air DS(HS)/ Anchor-Anmol Delus R/ Orient-Power Flow DBB |
| 103 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 104 | S/F of 18-25 wt. LED single strip tube. Light fittingwith all accessories & connection (make Havels/HPL/Crompton/Polycab/PAC) |
| 105 | S/F of 10 Watt Bulk Head (Make-Havells) |
| 106 | Supply & Fixing of 45-48 Watt single L.E.D street light fitting with LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 107 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(a)110mm dia.U-PVC SWR pipes |
| 108 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(b)110mm dia.U-PVC P-trap |
| 109 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(c)110mm dia.U-PVC SWR Single junction door |
| 110 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(d)110mm dia PVC SWR Nahani trap without Jally |
| 111 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(f)110mm dia.U-PVC SWR Offset |
| 112 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(g)110mm dia.U-PVC SWR plain bend |
| 113 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(i)110mm dia.U-PVC SWR vent cowl |
| 114 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(j)125mm dia CP greatings |
| 115 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(k)75mm dia.U-PVC SWR pipes |
| 116 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(l)75mm dia.PVC SWR plain bend |
| 117 | Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(m)75mm dia.PVC SWR door bend |
| 118 | Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking HCI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.(b)250mm thick wall |
| 119 | Supplying all materials,labour,T&P and fixing water closet,squatting pan (Indian type W.C pan/Orissa pattern squatting pan)duly embedded in cc(1:5:10)using 4cm size hard granite metal including fixing a pair of vitreous china 250mmx130mmx30mm footrest etc all complete as per specification and direction of the E.I.C.(a)580mm size Orissa pan(Nycer/Cera/Hindware/Parryware) |
| 120 | Supplying all materials,labour,T&P and fixing wash down water closet(E.W.C)with integral 'S' or P trap to the floor with wooden plug and CP screw including jointing the trap with soil waste pipe in cm 1:1etc all complete as per specification and direction of the E.I.C.a EWC with P & S trap plain Nycer/Cera/Hindware/Parryware |
| 121 | Supplying all materials,labour,T&P and fixing of plastic seat cover for EWC with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. |
| 122 | Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C.(a)550mmx400mm size WHB(Neycer/Parrywear/Cerra/Hindware) |
| 123 | Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C.(b)Pedestrial for WHB(Neycer/Parrywear/Cerra/Hindware) |
| 124 | supplying all labour,T&P materials & fixing wash Kitcken Sink with CI/MS Brackets painted white including holes in walls and making good the damages etc. all complete as per PH specification and direction of E.I.C(a)600mmx450mmx200mm Steel sink with 40mm dia c.p. west,west pipe and brackets. |
| 125 | Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.(a)CP Soap holder |
| 126 | Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C(a)600mmx450mm Mirror |
| 127 | Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.(a)(125x600)mm size glass-shelf |
| 128 | Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C.(a)CP towel rail |
| 129 | (Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C.a)CP Towel Ring |
| 130 | Supplying all materials,labour T&P and fitting and fixing 10 Ltrs capacity PVC LL flushing cistern with a pair of CI/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,over flow pipes,32mm dia PVC flushbend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C.(a)10 lit PVC L/L Cistern(Parry ware) |
| 131 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 132 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C |
| 133 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cm(1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.(a)In Ground Floor |
| 134 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cm(1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.(b)In 1st Floor |
| 135 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick CP(1:3)joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.(a)In Ground Floor |
| 136 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick CP(1:3)joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.(b)In 1st Floor |
| 137 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the E.I.C.(a) Initial lift up to 1.50m |
| 138 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the E.I.C.(b)From 1.5m to 3.00m depth |
| 139 | Supplying all materials labour T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of E.I.CST |
| 140 | Supplying all materials,labour,T&P and providing cc(1:3:6) with 4cm size hard granite metal including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per specification and direction of the E.I.CST |
| 141 | Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HG chips including watering,curing and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.S.T. |
| 142 | Supplying all materials labour T&P and providing brickwork with KB bricks having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8% including watering,curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C. KB Brickwork in cm(1:4) F&P |
| 143 | Supplying all materials,labour,T&P and providing cement plaster on brick/stone work including watering, curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.12mm thick CP in cm(1:3) |
| 144 | Supplying all materials labour T&P and providing cement punning for skirting including watering,curing, conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 145 | Supplying all materials labour T&P and providing rigid and smooth centering & shuttering for RCC works including falsework and dismantling them after casting including conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per specification and direction of E.I.C.S.T. |
| 146 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 147 | Supplying all materials labour T&P and providing RCC(1:1.5:3)using 12mm hg chips for RCC works including hoisting,laying,watering,curing,conveyance of all materials to work site,payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 148 | Supplying all materials labour T&P and fixing of RCC baffle wall precast with cc(1:1.5:3)using 12mm bhg chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 149 | Supplying all materials labour T&P and Providing cement flush pointing(1:3) to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C. |
| 150 | Supplying all materials,labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 151 | Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.(a)Inside size500mm x500mm x 460mm |
| 152 | Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.(b)Construction of Gully Trap Chamber (0.25 x 0.25 inside Size) |
| 153 | Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.(a)Bore Protection Chamber |
| 154 | Supplying all materials, labour, T&P and laying in trenches PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.110 mm dia PVC pipe line (Allround) |
| 155 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.(a)RCC Ring Soak way Pit 1.22m dia x 2.10m Deep (Inside Size) |
| 156 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(a)1000 lits capacity on the roof of 1st floor |
| 157 | Supplying all material,labour,T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to IS:15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above GL & placing the tank in required position including conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per PH specification and direction of the E.I.C.(a)1000 lits capacity on the roof of 1st floor |
| 158 | Supplying all materials,labour,T&P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(a)25mm dia C-PVC Pipe |
| 159 | Supplying all materials,labour,T&P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(b)25mm dia U-PVC Pipe |
| 160 | Supplying all materials,labour,T&P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.(c)20mm dia C-PVC Pipe |
| 161 | Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.(a)In Ground Floor |
| 162 | Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.(a)In 1st Floor |
| 163 | Supplying all materials,labour,T&P and cutting holes in RCC,floors,roof,etc.upto 19cm thick for passing GI/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.(a)In Ground Floor |
| 164 | Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.(a)In Ground Floor |
| 165 | Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.(a)In 1st Floor |
| 166 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Plaza/amber/equivalent )(a)15mm dia CP SB Bib cock |
| 167 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Plaza/amber/equivalent )(b)15mm dia CP(LB) Bib cock |
| 168 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Plaza/amber/equivalent )(c)15mm dia CP Two way Bib cock |
| 169 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Plaza/amber/equivalent )(e)15mm dia CP Angle stop cock |
| 170 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Plaza/amber/equivalent )(e)15mm dia CP Pillar stop cock |
| 171 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Plaza/amber/equivalent )(f)15mm dia CP Concealed stop cock |
| 172 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Plaza/amber/equivalent )(g)15mm dia CP Revolving Shower with shower Arm |
| 173 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Plaza/amber/equivalent )(h)15mm dia Health Faucet & 1.0m long Flexible pipe |
| 174 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Plaza/amber/equivalent )(i)25mm dia PVC F.W.V. |
| 175 | Supplying all materials,labour,T&P and fixing brass/CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of E.I.C.(Plaza/amber/equivalent )(j)15mm dia CP Flange |
| 176 | 1.00HP Single Phase Submersible Pump SetSupplying all materials,labour,T&P and fitting and fixing of ISI mark 1.0HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit/Hour & a head-55/70mtr.of reputed make(CRI/ KSB/Texmoor Equivelent) Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 177 | Supplying all materials,labour,T&P and fitting&fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C. |
| 178 | Supplying all materials,labour,T&P and fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.0HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 179 | Supplying all materials,labour,T&P and fitting & fixing of (2.5mm)2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 180 | Supplying fitting and fixing of plastic rope MS well cover,MS clamp,stainless steel short piece,bend & socket including all cost,taxes etc all complete as perdirection of the E.I.C. |
| 181 | Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C. |
| 182 | Sinking of 125mmx100mm Size Bore Well Through DTH Method:-Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth below GL level through consolidated and uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/200psi)as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 125mm dia PVC/ GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft, medium,hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after complete of tube well.(Tube well-1No)(a)Drilling of 125mm. dia. Bore-0.00mtr to 30mtr |
| 183 | Sinking of 125mmx100mm Size Bore Well Through DTH Method:-Labour for drilling of perfactly vertical bore holes as specified dia.For a specified depth below GL level through consolidated and uncosolidated rock with down the hole hammer drilling rigs or combination drilling rigs(600cfm/200psi)as required to suit the site conditions as per the direction of E.I.C.including use of own rigs with its accessories,tools & plants and consumable etc. for lowering 125mm dia PVC/ GI pipes for house fitted with socket and with or without well screen as per the necessity for the soft, medium,hard & boulder formation(PCV/GI)casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after complete of tube well.(Tube well-1No)(b)Drilling 100mm dia. Bore-30mtr to 100.00mtr and above |
| 184 | Lowering the following G.I/PVC pipe with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe)(a)Lowring of 125mm dia pipes-0.00mtr to 30.00mtr |
| 185 | Lowering the following G.I/PVC pipe with or without soltted pipes as per necessity from ground level upto 30.00mtr depth and fitted and fixed in perfecty vertical position including cutting and threading pipes and soltted pipes and supplying and fixing of all jointing materials,T&P etc the top of the casing pipe threaded including piping tube well to prevent entry of foreign materials from above(PVC/G.I) supplied by the contractor (including cost of pipe)(b)Cost of 125mm dia PVC casing pipes-0.00m to 30.60m |
| 186 | Cleaning&developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysSep 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender