Tender For Renovation And New Construction Work In Primary School Gosaidih In Tundi Block, District -Dhanbad
Tender Value
66.30 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
1 days left
EMD
1.33 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And New Construction Work In Primary School Gosaidih In Tundi Block, District -Dhanbad
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil(vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, Extra for earthwork in hard soil as per specification and direction of E/I. |
| 2 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance up to 50 M including all lifts levelling ramming the foundation trenches removing roots of trees shrubs all complete as per approved design, building specification and direction of E/I. |
| 3 | FILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation of trenches within 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) |
| 4 | FILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) |
| 5 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building -do-. |
| 6 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 9 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level.1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 10 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 11 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 12 | Reinforded cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:15:3 cement: 1.5 coarsesand(zone-l):3 graded stone aggregate 20 mmnominal size). |
| 13 | Reinforded cement concrete work in wals (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, Columns pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering& finishing and reinforcement : 1:1.5:3cement: 1.5 |
| 14 | Providing designation 75A brick work in C.M. (1:4) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. |
| 15 | Providing designation 75B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth curing -do-. |
| 16 | Providing 50 mm thick damp proof course with cement concrete M-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, and mixing cement concrete -do-. |
| 17 | Providing designation 100 A brick work with fly in ash time brick (FLAG) confirming to IS 12894 1990 (9''x4.5x3\\") in C.M (1:6) in super Structure-do- E/I |
| 18 | Providing 125 mm thick REINFORCED DESIGNATION 75 A BRICK WORK in C.M.(1:4) in SUPERSTRUCTURE with approved quality of clean coarse sand of F.M. 2 to2.5 including the cost of screening, cost of materials, racking out joints to 15 mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 19 | Providing 12 mm thick water proof CEMENT PLASTER (1:3)on with clean coarse sand of F.M.1.5 and 5% cico including cost of screening, curing making grooves with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I .(Cost of cico will be paid separately) |
| 20 | Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scafolding taxes and royalty all complete as per buildings specification and direction of E/I. |
| 21 | Providing 12mm cement plaster(1:3) with clean course sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing taxes and royalty all complete as per building specification and direction of E/I. |
| 22 | Providing 12 mm thick cement plaster(1:4) with clean coarse sand of FM1.5including screening,curing,with all leads and lifts of water,scaffolding,taxes and royalty all complete as per specification and direction of E/I. |
| 23 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 24 | Providing 12mm, cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening , curing with all leads and lifts of water , scaffholding taxes and all complete as per building specification and direction of E/I & Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 25 | Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M 1.5 including screening curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.+Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I. |
| 26 | Providing 1.5mm thick cement punning including curing, etc. complete job as per specification and direction of E/I. |
| 27 | Providing and laying 6mm precast white glazed glazed tiles in wall over 12mm cement motar (1:3) and jointed with grey cement slurry flushed pointed with a grade white 15x15 cm TILES |
| 28 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips do…………. Do…….. All complete job |
| 29 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15 mm depth, watering and disposal of uncerviceable materiaks with all leads all complete as per direction of E/I. |
| 30 | Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 31 | Taking down chaukhats in doors including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 32 | Taking down chaukhats in window including stacking serviceable materials with 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 33 | Providing and laying polished VITRIFIED FLOOR TILES in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and confirming to IS : 15622 of approved make in all colors and shades laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand) including grouting the joints with cement and matching pigments etc. complete.Size of Tile 600 x 600 mm |
| 34 | Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flats as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site, hoisting as per building specific-do-. |
| 35 | Supply of 50x50x6mm size angle for choukhat inwindow |
| 36 | providing and fixing 1MM thick MS sheet door with frame of 40x40x6mm angle iron and 3mm MS gusset plats at the junction and corners all necessary fitting complete including appliying a prime coat of approved steel primer. |
| 37 | Supplying Fitting Fixing Collapsible Gate of Approved Size and make …do…do…as per Building Specification and Dir of E/I. |
| 38 | Supplying fitting and fixing 20 gauge G.C.I. Sheet gate fitted on M.S. Angle frame of size 60x60x6mm. Including cost of fabrication providing necessary locking arrangement with Haskell and downy duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction E/I. |
| 39 | Labour for fabricating erecting hoisting and fixing in position structural steel work in RS Joist channel angel tee flat plate latice member built up to compound section do……..do……. All complete jobMS Angel 50x50x4 |
| 40 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. |
| 41 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 42 | Providing two Coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new suface including preparing plastered sufaçe by rubbing smoóth with pumsicestone or fine sand papér, applying puty wherever required scaffolding washing of fobt and taxes all complete as per building specification anddieotion of E/I. |
| 43 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red |
| 44 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 45 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface all complete as per building specification and direction of E/I. |
| 46 | Providing and applying plaster of Paris Putty of 2 mm thickness over Plastered surface to prepars the Surface to prepare the surface even and smooth complete. |
| 47 | Finishing wall with acrylic smooth exterior paint of requird shade :13.46.1 new work (Tow of more coat applied @1.67/ltr/10sqm over and including priming coat of exterior primer applied @2.20kg/10sqm |
| 48 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all complete as per specification and direction of E/I and Providing primer one coat or red lead paint of approved makeover new steel surface -do-- |
| 49 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all complete as per specification and direction of E/I and Providing primer one coat or red lead paint of approved makeover new steel surface -do-- |
| 50 | Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab beam at the time of casting all complete as per building specification and direction of E/I. |
| 51 | Covering of treated surface with PCC:- Providing25 mm thick Cement concrete M-20 (1:1.5:3) maintaing slope in alternate 2 Mtr. X 2Mtr. Panels with approved quality of stone chips of 20mm to 6mm Size graded and cleaned sand ofF.M. 2.5 to 3 including screening E/I. |
| 52 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of acoat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : |
| 53 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 54 | Providing Tor steel reinforcement of rods as per approved design and drawing including carriage of Rods (straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust,-do- |
| 55 | Providing Tor steel reinforcement of rods as per approved design and drawing including carriage of Rods (straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust,-do- |
| 56 | Providing structural steel galvanised tubular hollow section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer- in- charge,including cutting fabricating,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of omponents to be Galv) preferably TATA structural section etc complete. |
| 57 | Providing and fixing pressed steel door frames conferming to IS 4351 menufactured from merical mild steel sheet of 1.60mm thick, including inges jamb,bead and if required angle thresold of mild steel angle of section 25mm or base tie of 1.60mm pressed mild steel welded or rigidly fixed together by mechanical eans ---do ---do --- all complete as per approved drawing, DSR specification and direction of E/I. |
| 58 | Proving corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers field with white lead, including a coat of approved steel primer and two coats of approved paint on over apping of sheets complete up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cuting to size and shape wherever required.0.80mm thick with zinc coating not lessthan 275gm m2 |
| 59 | Providing and laying factory made coloured chamfered edge cement concrete paver block of required strength , thickness and size/shape, made by vibratory method using PU mould laid in required colour & pattern over 80 mm thick compacted bed of fine sand ,compacting and proper embedding /laying of inter locking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator , filling the joints with sand and cutting the paver blocks as per required size and pattern ,finishing and sweeping extra sand in footpath parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer's specifications and direction of E/I. 60 mm thick C.C. paver block of M-35 grade with approved colour, design and pattern. |
| 60 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm drybrick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 61 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 62 | Centering and shuttering including strutting, propping etc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers |
| 63 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 64 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 65 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 66 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 67 | Providing welder Grade-II for fixing theG.I. and placing in position all complete job. |
| 68 | Carriage of Materiali. Cement |
| 69 | ii. Sand |
| 70 | iii Stone Chips |
| 71 | iv. Bricks |
| 72 | v. Steel |
| 73 | 6. metal |
| 74 | ELECTRIC Wiring for light/point/Exhaust fan point/call bell point with 1.5 sq.mm FRPVC insulated copper conductor cable in surface/recessed PVC conducit as required. With piano type switch phenolic laminated sheet MS Box earthing the point PVC insulated copper 1.5 Sq.mm FR PVC insulated copper conductor single core cable etc. at required.1.1.3 Group C |
| 75 | Power plug wiring in PVC conduit wiring for light/power plug wiring with 2x4 sqmm PVC insluated copper kconductor single core cable in surface recessed PVC conduit alongwith 1 Nos. 4 sqmm FR PVC insluated copper conductor single core cable for loop earthing as required. |
| 76 | 1.7.1 :- 2x1.5 sqmm+1x1.5sqmm earth wire |
| 77 | Supplying and fixing following piano type switch socket on the existing switch box/cover including connections etc. as required. Electronic step fan regulator , mini |
| 78 | Supplying and fixing piano type switch/ socket 1.23.4- 3pin 5/6 amps, socket outlets |
| 79 | 1.23.5-15/16, 6 pin socket outlet |
| 80 | Supplying and fixing PVC /G.I box of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover infront including painting etc as required. 170 mm x 221 mm x 48 mm deep/(8\\" x 10\\") |
| 81 | Supplying and fixing PVC/G.I. box of 210mm x206 mmx48mm deep on (nominal size (10''x12'')) surface/recessed with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amp and 15/16 ampsocket outlet and 15/16 amp piano type switch connection etc as required. |
| 82 | Supplying and fixing of following way three pole & neutral, sheet steel , MCB distribution board 240 volts, on surface /recess , complete with tinned copper bushbars ,neutral busbar, earth bar , din bar ,detachable gland plate , interconnections ,phosphatized and powder painted including earthing etc. as requried. (but without MCB/RCCB/ISOLATOR) 4 way (4+12), Double door horizontal type |
| 83 | S-F- C series MCB 6/32/Amps single pole |
| 84 | S/F Bitten Holder -Do - -do- |
| 85 | Supplying LED 10 Watt |
| 86 | S/F Moduler type electronic fan regulator. (1.25) |
| 87 | Supplying Celling Fan (56'' dia) |
| 88 | S.I.T.C of following raiting surface mounted LED tube light fitting suitable for 230 V50 Hz,single phase supply etc.complete as required. 20/22 W LED Tube light |
| 89 | Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/racessed PVC conduit as required. 2x2.5 sqmm+1x2.5sqmm earth wire |
| 90 | 2x6 sqmm+1x6 sqmm earth wire |
| 91 | S/F 3 pin, 5Amp celling rose on the existing junction Box/wooden block including connection etc as required. |
| 92 | ITC exhaust fan upto 450mm sweep |
| 93 | Supplying and fixing following way single pole neutral,sheet MCB distributation board,240 volts on surface/recess, complete with tinned copper busbar, natural busbar,earth bar,din bar, detached gland plate, interconnections, phosphatized and powered painted including earthing etc.as required(but without MCB/RCCB/Isolator) 8 way, double door. |
| 94 | 2.5.1:- 100amp MCB |
| 95 | MV cable laying upto 25 sq Mm in ground - Laying of one nu mber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 25sq mm. but exceeding 120 sq mm direct in ground including excavation, sand cushioning,protective covering and refilling the trench etc as required. |
| 96 | 12\\" (300mm) Exhaust fan |
| 97 | 15\\" Exhaust fan |
| 98 | Providing and fixing following capacity 2 pole/ 4 pole ON/OFF-Load change over switches with side handle operation , in sheet enclosure in existing metal board including drilling holes in metal board , making connection, earthing the body etc. as required.32 amps,2pole |
| 99 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required |
| 100 | Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode , including soldering etc. as required. |
| 101 | SITC of following rating LED street lighting luminare with pressure die cast housing and toughened glass cover (IP 66 Protection ) in existing pole/pipe for supply voltage 100-270 v AC 50 HZ… do …. Do…. E/I... 60 W LED Street light....... |
| 102 | Sainatry Work Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixed a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. 580 mm. long With 10 lit. low level PVC Cistem |
| 103 | Supplying fitting and fixing white glazed earthen were urinal flatblack(450mmx350mm)hindustan/parryware/cera/naycerwith necessary fitting (450mmx350mm ) small |
| 104 | Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 105 | Making hole in wall of 250mm and rescoring the same 12mm dia. |
| 106 | Providing and fixing C.P. brass bib cock of approved conforming to IS 8931. |
| 107 | Providing and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings. |
| 108 | Kitchen sink without drain board 17.10.2.1 610x510 mm bowl depth 200 mm |
| 109 | Providing and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings. |
| 110 | Providing and fixing C.P Soap Dish Holder having length of 138 mm breadth 102 mm, height of 75mm with concealed fitting arrangements, weighing not less than 110 gms. |
| 111 | Providing and fixing PTMT extension nipple for water tank pipe,fitting or approved quality and colour. 15 mm nominal bore weighing not less than 32 gms |
| 112 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 113 | Providing & Fixing Brass /CI Stop Cork Of approved quality (d) 32 mm Dia |
| 114 | Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and directionof E/I. |
| 115 | 15 mm nominal outer dia Pipes |
| 116 | 20 mm nominal outer dia Pipes |
| 117 | 32 mm nominal outer dia Pipes |
| 118 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single pushfit Coupler 110 mm |
| 119 | Single tee with door 110x110x110 mm |
| 120 | Bend 87.5° 110 mm bend |
| 121 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion(110 mm diameter) |
| 122 | DEEP BOARING Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig, air compressure and equipments as well as fule, lubricants and cost of transportation of rig machine annd other vehical up to Site. (a) From 0.00 M to 50.00 M below G.L. |
| 123 | (b) From 51.0 M to125.00 M |
| 124 | Supplying, assembling, lowering and fixing in vertical position in bore well, un-plasticized PVC medium well casing (CM) pipe of required dia, all complete, for all depths, as per direction of Engineer-in-charge. 200mm nominal size dia. |
| 125 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \\"V\\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge |
| 126 | Supplying and commissionig of submersible pump set of reputed KSB/tTexmo make ISI, ISO 9001 marked or having ISO 9001-2000 submersible motor pump for HYDT & head of 100.00m having discharge 4000 l/hour and lowering mm dia PVC submersible schedule 80 pipe & 2.5 sq.mm size finolex copper cable about 80.00 m with main switch 32Amp & panel board sonsisting voltmeter ammeter, on/off switch HRC fuse unit and lighting arrangement, adobter, rope with all complete job as oer specification and direction of E/I1.5 HP |
| 127 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS : 2800 (part I) including necessary bolts & nuts of requried size complete. 200 mm clamp |
| 128 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Excluding GST) 32 mm nominal outer dia Pipes |
| 129 | Supply fitting and fixing of standered make starter pannel board with arrangement of all necessary protection including all taxes royality etc. all complete job as per direction of E/I |
| 130 | Supplying fitting and fizing 3 crore 4 sqmm flat copper submemersible cable Finolex/Hevels make including all taxes royality etc. al complete job as per direction of E/I |
| 131 | Polythene water storage tank of ISI Mark (e.g. Sintex/Sinter/Himgir/Gangotri etc.) with cover and locking system |
| 132 | Goods & Service Tax (G.S.T.) - |
| 133 | Labour Cess - Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender