Tender For Renovation And Construction Work In Middle School Benagoria Block -Nirsa, District-Dhanbad
Tender Value
86.28 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
0 days left
EMD
1.73 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Construction Work In Middle School Benagoria Block -Nirsa, District-Dhanbad
BOQ
| Sl. No. | Item Description |
| 1 | Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scafolding taxes and royalty all complete as per buildings specification and direction of E/I. |
| 2 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm. depth. watering and disposal of unserviceable materials with all leads all complete as per Direction of E/I. |
| 3 | Earth work in excavation in foundation trenches in ordinary soil (Vide classification of soil, item:A) and disposal of excavated earth as obtain to a distance upto 50M including all leads, levelling ramming the foundation trenches removing roots of trees, shurbs all complete as per appeoved design, building specification and direction of E/I. |
| 4 | Providing 12mm cement plaster(1:3) with clean course sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing taxes and royalty all complete as per building specification and direction of E/I. |
| 5 | Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 6 | Taking down chaukhats in doors including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 7 | Taking down chaukhats in window including stacking serviceable materials with 15M lead and disposal of unserviceable materials with all leads all complete as per direction of E/I |
| 8 | Supplying fitting and fixing 20 gauge G.C.I. Sheet gate fitted on M.S. Angle frame of size 60x60x6mm. Including cost of fabrication providing necessary locking arrangement with Haskell and downy duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction E/I. |
| 9 | Providing and applying plaster of Paris Putty of 2 mm thickness over Plastered surface to prepars the Surface to prepare the surface even and smooth complete. |
| 10 | Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives \\"Snowcryl - XT\\" of M/S Snowcem India Ltd, or equivalent of required shade. New work (Two or more coats applied @1.43 ltr / 10sqm. Over and including base coat of water proofing cement paint Snowcem Plus or equivalent applied @ 2.20 kg./10 sq.m. ) |
| 11 | Covering of treated surface with PCC:- Providing 25 mm thick Cement concrete M-20 (1:1.5:3) maintaing slope in alternate 2 Mtr. X 2Mtr. Panels with approved quality of stone chips of 20mm to 6mm Size graded and cleaned sand of F.M. 2.5 to 3 including screening E/I. |
| 12 | Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of acoat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : |
| 13 | Providing 250mm. wide brick drain in cement mortar(1:6) with av.150mm. clear depth and 250mm. apron including cost of earthwork involved with 75mm. cement concrete (1:4:3) over one brick designation 75A,flat soling in proper grade and slope at the base,the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building. |
| 14 | Providing two coat of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface throughly, scaffolding and taxes all complete as per specification and direction of E/I and Providing primer one coat or red lead paint of approved makeover new steel surface all complete as per specification and direction of E/I |
| 15 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement :3 coarse sand : 6 graded stone aggregate 20mm nominal size ) over 75mm bad by dry brick ballast 40mm nominal size well rammend and consolidated and grouted with fine sand including finishing the top smooth. |
| 16 | Providing coarse clean sand filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm.Thick with all leads and lifts including cost of all materials labour,royalty and taxes all complete as per building specification and direction of E/1.(Mode of measurement compacted volume). |
| 17 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level: |
| 18 | Providing designation 75B Brick work in C.M.(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M.2 to 2.5 including providing 10mm thick mortar joints cost of screening carriage of materials, raking out joints to 15mm. depth, curing, taxes and royalty all complete as per building specification and direction of E/l. |
| 19 | Providing designation 100 A brick work with fly in ash time brick (FLAG) confirming to IS 12894 1990 (9''x4.5x3\\") in C.M (1:6) in super Structure-do- E/I |
| 20 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level excluding cost of centering, shuttering finishing and reinforcement:1:1.5:3 (1 cement:1.5 coarse sand (zone-IIl): 3 graded stone aggregate 20 mm nominal size) |
| 21 | Providing 12mm thick water proof cement plaster (1:3)with clean coarse sand of F.M.1.5 with 5%cico or any other approved water proofing compound including screening,curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 22 | Supplying,and fixing fan hook of 16mm dia M.S.bar 1 meter long bent to required size and shape, placed in position and fixed in R.C.C.slab/beam at the time of casting all complete as per building specification and direction of E/l (where materials is not supplied by the deptt.) |
| 23 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S.bars to work site, cutting, bending and binding with annealed wire with cost of the wire removal of rust, placing the rods in position all complete as per building specification and direction of E/I.TMT Fe 500 (only valid for SAIL &TATA STEEL) 8 MM DIA |
| 24 | TMTC-500 10mm dia |
| 25 | TMTC-500 12mm dia |
| 26 | Centering and shuttering including strutting Propping etc and removal of form for Foundations, footings, bases of columns, etc.for mass concrete |
| 27 | Suspended floors, roofs, landings balconies and access platform |
| 28 | Weather shade, Chajjas, corbels etc. including edges |
| 29 | Providing 12mm.cement plaster (1:3) with punning with clean coarse sand of F.M.1.5 including cost of carriage screening,curing with all leads and lifts of water,scaffolding,taxes and royalty all complete as per building specification and direction of E/l. |
| 30 | Supplying, fitting and fixing M.S.grill made of 20mm x 6mm M.S.flat asper approved desing and drawing, properly fabricated with joints continuous fillet, welded and finished smooth,carriage of grill to work site,hoisting as per building specification and direction of E/l. |
| 31 | Supplying of 50x50x6mm size angle for chaukhat in windows |
| 32 | Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, channel, Angle, Tee, flat, plate ,latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding ( machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/l |
| 33 | Providing and fixing hand rail of approved size by welding etc.to steel ladder railing, balcony railing,staircase railing and similar works,including applying priming coat of approved steel primer. |
| 34 | Providing and fixing 1mm thick M.S.sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S.gusset plates at the junctions and corners,all necessary fittings complete,including applying a priming coat of approved steel primer Using M.S.angels 40x40x6 mm for diagonal braces |
| 35 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from mercial mild steel sheet of 1.60 mm thickness,including inges, jamb, lock jamb,bead and if required angle threshold of mild steel angle of sectionx25 mm, or base ties of 1.60 mm,pressed mild steel welded or rigidly fixed together by mechanical eans, including M.S.pressed butt hinges 2.5 mm thick with ortar guards,lock strike- plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directedby Engineer-in-charge: Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) |
| 36 | Supplying,fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20x10x2mm at 100mm centers and braced with M.S.flat diagonals 20x 3mm with top and bottom rails of T.iron 40 x40x6mm with 38mm dia steel pulleys complete with bolts,nuts,locking arrangement, stoppers,handles including applying a priming coat of red lead paint,car riage,hoisting and taxes all complete as per building specification and direction of E/l. |
| 37 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 38 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/l. |
| 39 | Finishing walls with Acrylic Smooth exterior paint of required shade:13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sgm over and including priming coat of exterior primer applied @2.20 kg/10 sqm |
| 40 | Providing two coats of synthetic ename paint of approved shade and make over red lead paint over steel surface including cleaning the surface thououghly scaffolding and taxes all complete as per building specifications and direction of E/ |
| 41 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion,(i)Single socketed pipes.12.41.2110 mm diameter |
| 42 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 43 | providing two coat snow cem all complete job |
| 44 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level:1:4:8 (1 cement: 4 coarse sand (zone-III) :8 graded stone aggregate 40 mm nominal size) |
| 45 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 46 | Centring and shuttering including strutting, propping etc. and removal of form for columns, pillars, piers, abutments, posts and struts |
| 47 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 48 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 49 | Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 50 | Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 51 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 52 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.Extra each coat of cement wash ,distemper |
| 53 | Providing P.C.C.M20 with nominal mix of (1:1.5:3) in foundation with approved quality of stone metal grade-III (50 mm to25mm size)clean coarse sand of F.M. 2.5 to 3including screening,shuttering,mixing cement concrete in mixer and placing in sition,vibrating,striking,curing taxes and royalty all complete. as per building specification and direction of E/I. |
| 54 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone- III) : 3 graded stone aggregate 20 mm nominal size). |
| 55 | Providing 12 mm thick cement plaster(1:4) with clean coarse sand of FM1.5including screening,curing,with all leads and lifts of water,scaffolding,taxes and royalty all complete as per specification and direction of E/I. |
| 56 | Providing and laying DAMP PROOF COURSE 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse (zone-III): 4 graded stone aggregate 20 mm nominal size). |
| 57 | Filling in foundation trenches and plinth in layers not exceeding 15Omm thick well watered rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50mm and lifts of 1.5 all complete as per specification and direction of E/I. |
| 58 | Providing 125 mm thick REINFORCED DESIGNATION 75 A BRICK WORK in C.M. (1:4) in SUPERSTRUCTURE with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening, cost of materials, racking out joints to 15 mm depth, carriage, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 59 | Providing 1.5inm cement purining including curing, carriage of water with all leads and lefts as per building specification and direction of E/I. |
| 60 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 61 | Providing structural steel galvanised tubular hollow section work in trusses, other similar trussed purlins and members with all bracing ,gusset plates etc as per detailed design and drawing or as directed by Engineer-in-charge,including cutting fabricating ,hoisting , erecting and fixing in position , making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of omponents to be Galv) preferably TATA structural section etc cOmDlete. |
| 62 | Proving corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers field with white lead, including a coat of approved steel primer and two coats of approved paint on over apping of sheets complete up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cuting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm m2 |
| 63 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface -do- -do- all complete job as per specification and direction of E/I. Pulling & Pipe |
| 64 | Providing welder Grade-II for fixing the G.I. and placing in position all complete job. |
| 65 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I. |
| 66 | 16.91.1 Providing and laying factory made coloured chamfered edge cement concrete paver block of required strength , thickness and size/shape, made by vibratory method using PU mould laid in required colour & pattern over 80 mm thick compacted bed of fine sand ,compacting and proper embedding /laying of inter locking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator , filling the joints with sand and cutting the paver blocks as per required size and pattern ,finishing and sweeping extra sand in footpath parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer's specifications and direction of E/I. 60 mm thick C.C. paver block of M-35 grade with approved colour, design and pattern. |
| 67 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -all work up to plinth level: (1:2:4) (1 cement : 2 coarse sand (zone III ) : 4 graded stone aggregate 20 mm nominal size ) |
| 68 | Providing designation 75B one brick flat soling joints fitted with local sand including cost of watering taxes royalty all complete as per buinding specification and direction of E/I. |
| 69 | Providing 12mm thick cement plaster (1:4) with clean coarse sand of F.M 1.5 including screening curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I.+Providing 1.5mm cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I. |
| 70 | Filling in foundation tranches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches with a lead of 50M and lift of 1.5M all complete as per building specification and direction of E/I. (Mode of measurment compacted volume). |
| 71 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red |
| 72 | Providing and fixing chlorinated polyvinyl chloride (CPVC)pipes, having trermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting,i/c fixing the pipes with clamp at1.00m spacing.This includes 15 mm nominal outer dia pipes |
| 73 | Providing and fixing P.T.M.T. / C.P. extentsion Nipples 15mm size with 12” BSP threads, 70mm length and 30 mm bredth and weight not less than 18gms |
| 74 | Providing And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 75 | Providing and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings. |
| 76 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 77 | Wiring for light/point/Exhaust fan point/call bell point with 1.5 sq.mm FRPVC insulated copper conductor cable in surface/recessed PVC conducit as required. With piano type switch phenolic laminated sheet MS Box earthing the point PVC insulated copper 1.5 Sq.mm FR PVC insulated copper conductor single core cable etc. at required. |
| 78 | Supplying and fixing kfollowing piano tpe switch/socket on the existing switch box/cover including connections etc as required |
| 79 | S/F Moduler type electronic fan regulator. (1.25) |
| 80 | Supplying Celling Fan (56'' dia) |
| 81 | Supplying LED 10 Watt |
| 82 | Wiring for Circuit/submain wiring along with earth wire with the following sizes PyC insulated copper conductor,single core cable in surface/recessed PVC conduit as required (i) 1.7.1 2 x1.5sq.mm. + 1 x1.5sq.mm.earth wire |
| 83 | SITC of following rating LED street lighting luminare with pressure die cast housing and toughened glass cover (IP 66 Protection ) in existing pole/pipe for supply voltage 100-270 v AC 50 HZ as per specification and direction of E/I. 60 W LED Street light |
| 84 | Carriage of material Cost (i) Cement + Steel -10 KM |
| 85 | (ii) Sand - 20 km |
| 86 | (i) Bricks / Paver - 15 km |
| 87 | (iii) Stone chips - 25 km |
| 88 | Goods & Service Tax (G.S.T.) - |
| 89 | Labour Cess - Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender