Tender For Renovation And Construction Work In Primary School Ghagra In Nirsa Block, District-Dhanbad
Tender Value
57.42 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
0 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation And Construction Work In Primary School Ghagra In Nirsa Block, District-Dhanbad
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance up to 50 M including all lifts , levelling , ramming the foundation trenches , removing roots of trees , shrubs all compete as per approved design , building specification and direction of E/I. |
| 2 | Providing coarse clean sand in filling or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all material , lobour , royality and taxes all complete as per building specifiction and direction of E/I (Mode of measurment compacted volume) |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:2:4 (1 cement : 2coarse sand (zone-III): 4 graded stone aggregate 40 mm nominal size) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 6 | Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 7 | Providing designation 100 A brick work with fly in ash time brick (FLAG) confirming to IS 12894 1990 (9''x4.5x3\\") in C.M (1:6) in super Structure-do- E/I |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 10 | Supplying, and fixing fan hook of 16mm dia M.S. bar 1 meter long bent to required size and shape , placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 11 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) (8 mm dia) |
| 12 | TMTC-500 10mm dia |
| 13 | TMTC-500 12mm dia |
| 14 | Weather shade, Chajjas, corbels etc., including edges |
| 15 | Providing 12mm, cement plaster (1:3) with clean coarse sand of F.M. 1.5 including screening , curing with all leads and lifts of water , scaffholding taxes and all complete as per building specification and direction of E/I & Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 16 | Supplying, fitting, and fixing M.S. Grill made of 20X6mm M.S. Flate as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, carriage of grill to work site, hoisting as per building specification and direction of E/I. (where materials is not supplied by the deptt.) |
| 17 | Supply of 50x50x6mm size angle for choukhat inwindow |
| 18 | Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding ( machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I. MS Angel 50x50x4 |
| 19 | providing and fixing hand rail of approved size by welding etc. to steel lader railing balcony railing ,staircase railing and similar work including applying prime coat of approved steel primer. |
| 20 | providing and fixing 1MM thick MS sheet door with frame of 40x40x6mm angle iron and 3mm MS gusset plats at the junction and corners all necessary fitting complete including appliying a prime coat of approved steel primer. Using MS angle 40x40x6mm for diagonal braces |
| 21 | Providing and fixing pressed steel door frames conferming to IS 4351 menufactured from merical mild steel sheet of 1.60mm thick, including inges jamb,bead and if required angle thresold of mild steel angle of section 25mm or base tie of 1.60mm pressed mild steel welded or rigidly fixed together by mechanical eans ---do ---do --- all complete as per approved drawing, DSR specification and direction of E/I. |
| 22 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2mm at 100mm centers and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40 x 40 x 6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of red lead paint, car riage, hoisting and taxes all complete as per building specification and direction of E/I. |
| 23 | Providing 25mm thick first class patent store flooring (1:2:4)with stone chips in two layers , bottom layer 19 mm thick (1:2:4)with 12mm to 6mm size graded stone chips and top layers 6mm, thick (1:2)with 6mm down stone chips , in panels including cost of curing fininshing the surface smooth byrubbing with carbondum stone ,taxes and royalty with all complete as per building specification and direction of E/I |
| 24 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 25 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 26 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 27 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 28 | Providing two coat snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper. Scaffolding, curing and taxes all complete as pr building specification and direction of E/I |
| 29 | Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50M and lift of 1.5 M all complete as per building specification direction of E/I. (Mode of measurement compacted volume) |
| 30 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level:1:4:8 (1 cement: 4 coarse sand (zone-III) :8 graded stone aggregate 40 mm nominal size) |
| 31 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 32 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 33 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete. |
| 34 | Finishing walls with textured exterior paint of required shade New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm |
| 35 | Supplying, fitting and fixing M.S. grill gate with M.S. grill made of 20X6mm M.S. flats or 16mm M.S. square bars fitted on 25X25X6mm M.S. Angle frame of size 60X60X6mm. Including cost of fabrication, providing necessary locking arrangement with haskal and domny duly fixed in P.C.C. (1:2:4) blocks of required size applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 37 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I.Extra each coat of cement wash ,distemper |
| 38 | Extra for earthwork in hard soil as per. Specification and direction of E/I (Vide classification of Soil item _B) |
| 39 | Providing two Coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new suface including preparing plastered sufaçe by rubbing smoóth with pumsicestone or fine sand papér, applying puty wherever required scaffolding washing of fobt and taxes all complete as per building specification anddieotion of E/I. |
| 40 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 41 | Supplying fitting and fixing 20 gauge G.C.I. Sheet gate fitted on M.S. Angle frame of size 60x60x6mm. Including cost of fabrication providing necessary locking arrangement with Haskell and downy duly fixed in P.C.C. (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction E/I. |
| 42 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface all complete as per building specification and direction of E/I. |
| 43 | Providing and laying 6mm precast white glazed glazed tiles in wall over 12mm cement motar (1:3) and jointed with grey cement slurry flushed pointed with a grade white 15x15 cm TILES |
| 44 | Providing and laying double charge vertified floor tiles in different sizes with water absorption less than 0.08% and confirming to is code 15622/iso 13006 of approved make in all colours and shades laid on 20mm thick cement mortar (1:4) jointing with grey cement slurry @3.3 kg/sqm do-do-E/I. Size of Tiles 600x600 mm. |
| 45 | Providing designation 75A brick work in C.M. (1:4) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I. |
| 46 | Providing 12mm cement plaster(1:3) with clean course sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing taxes and royalty all complete as per building specification and direction of E/I. |
| 47 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm drybrick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 48 | Providing P.C.C.M20 with nominal mix of (1:1.5:3) in foundation with approved quality of stone metal grade-III (50 mm to25mm size)clean coarse sand of F.M. 2.5 to 3including screening,shuttering,mixing cement concrete in mixer and placing in sition,vibrating,striking,curing taxes and royalty all complete. as per building specification and direction of E/I. |
| 49 | Providing 12 mm thick cement plaster(1:4) with clean coarse sand of FM1.5including screening,curing,with all leads and lifts of water,scaffolding,taxes and royalty all complete as per specification and direction of E/I. |
| 50 | Providing 1.5 mm thick cement punning including screening, curing,with all leads and lifts of water, scaffolding, royalty all complete as per pecification and direction of E/I. |
| 51 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab colour black, Cherry/Ruby red |
| 52 | EARTH FILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) |
| 53 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 54 | Providing 25mm thick damp proof course with cement concrete M-150 with nominal mix of (1:2:4) with approved quality of stone chips of 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including screening, and mixing cement concrete taxes royalty all complete as per building specification and direction of E/I. |
| 55 | Providing 12 mm thick water proof CEMENT PLASTER (1:3)on outside wall with clean coarse sand of F.M.1.5 and 5% cico including cost of screening, curing making grooves with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I .(Cost of cico will be paid separately) |
| 56 | Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scafolding taxes and royalty all complete as per buildings specification and direction of E/I. |
| 57 | Providing 12mm thick cement plaster (1:6) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I |
| 58 | Providing and applying plaster of Paris Putty of 2 mm thickness over Plastered surface to prepars the Surface to prepare the surface even and smooth complete. |
| 59 | Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives \\"Snowcryl - XT\\" of M/S Snowcem India Ltd, or equivalent of required shade. New work (Two or more coats applied @1.43 ltr / 10sqm. Over and including base coat of water proofing cement paint Snowcem Plus or equivalent applied @ 2.20 kg./10 sq.m. ) |
| 60 | Providing primer one coat of red lead paint of approved make over new steel surface and Two coat of painting with ready mixed paint taxes royalty all complete as per building specification and direction of E/I. |
| 61 | Providing Tor steel reinforcement of rods as per approved design and drawing including carriage of Rods (straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust all complete as per building specification and direction of E/I. 8mm |
| 62 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete |
| 63 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform |
| 64 | Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts |
| 65 | Paver Block Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I. |
| 66 | 16.91.1 Providing and laying factory made coloured chamfered edge cement concrete paver block of required strength , thickness and size/shape, made by vibratory method using PU mould laid in required colour & pattern over 80 mm thick compacted bed of fine sand ,compacting and proper embedding /laying of inter locking paver blocks in to the sand bedding layer through vibratory compaction by using plate vibrator , filling the joints with sand and cutting the paver blocks as per required size and pattern ,finishing and sweeping extra sand in footpath parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer's specifications and direction of E/I. 60 mm thick C.C. paver block of M-35 grade with approved colour, design and pattern. |
| 67 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Excluding GST) 15 mm nominal outer dia Pipes |
| 68 | Providing Fixing CP Brass liquid soap container do……. Do……. All complete job |
| 69 | Kitchen sink without drain board 17.10.2.1 610x510 mm bowl depth 200 mm |
| 70 | Water Supply in Toilet Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other I.S.S. approved make with 100mm H.C.I. 'p' trap 15 litres C.I. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixed a pair of vitreous white glazed earthenware ware footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450 mm. long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I. With 10 lit. low level PVC Cistem |
| 71 | Supplying fitting and fixing white glazed earthen were urinal flatblack(450mmx350mm)hindustan/parryware/cera/naycerwith necessary fitting (450mmx350mm ) small |
| 72 | Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of parry or Hindustan or any other I.S.S approved make supported on painted C.I. or R.S. brackets 32mm C.I. brass waste, 15mm dia C.I. body spindle stop cock of approved quality of weight not less than 350grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. |
| 73 | Making hole in wall of 250mm and rescoring the same 12mm dia. |
| 74 | Providing and fixing C.P brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore |
| 75 | Providing and fixing C.P Soap Dish Holder having length of 138 mm breadth 102 mm, height of 75mm with concealed fitting arrangements, weighing not less than 110 gms. |
| 76 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 77 | Providing & Fixing Brass /CI Stop Cork Of approved quality (d) 32 mm Dia |
| 78 | Providing and fixing CPVC pipes all complete job. Exposed on Wall 20 mm nominal outer dia Pipes |
| 79 | 32 mm nominal outer dia Pipes |
| 80 | Conselled 15mm dia |
| 81 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single pushfit Coupler 110 mm |
| 82 | Single tee with door 110x110x110 mm |
| 83 | Bend 87.5° 110 mm bend |
| 84 | Providing and fixing on wall face unplasticise rigid pvc rain water pipe conferming to IS 13592 type A including jointing with steel ring conferming to IS 5382 leaving 10mm gap for tharmal expension (single socket pipe 12.41.2 110mm dia. |
| 85 | Deep Boring & Installation (a) From 0.00 M to 50.00 M below G.L. |
| 86 | (b) From 51.0 M to125.00 M |
| 87 | Supplying, assembling, lowering and fixing in vertical position in bore well, un-plasticized PVC medium well casing (CM) pipe of required dia, all complete, for all depths, as per direction of Engineer-in-charge. 200mm nominal size dia. |
| 88 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \\"V\\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge |
| 89 | Supplying and commissionig of submersible pump set of reputed KSB/tTexmo make ISI, ISO 9001 marked or having ISO 9001-2000 submersible motor pump for HYDT & head of 100.00m having discharge 4000 l/hour and lowering mm dia PVC submersible schedule 80 pipe & 2.5 sq.mm size finolex copper cable about 80.00 m with main switch 32Amp & panel board sonsisting voltmeter ammeter, on/off switch HRC fuse unit and lighting arrangement, adobter, rope with all complete job as oer specification and direction of E/I1.5 HP |
| 90 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS : 2800 (part I) including necessary bolts & nuts of requried size complete. 200 mm clamp |
| 91 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe withclamps at 1.00 m spacing. This includes jointing of pipes & fittingswith one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Excluding GST) 32 mm nominal outer dia Pipes |
| 92 | Supply fitting and fixing of standered make starter pannel board with arrangement of all necessary protection including all taxes royality etc. all complete job as per direction of E/I |
| 93 | Supplying fitting and fizing 3 crore 4 sqmm flat copper submemersible cable Finolex/Hevels make including all taxes royality etc. al complete job as per direction of E/I |
| 94 | Polythene water storage tank of ISI Mark (e.g. Sintex/Sinter/Himgir/Gangotri etc.) with cover and locking system |
| 95 | Providing and fixing chlorinated polyvinyl chloride (CPVC)pipes, having trermal stability for hot & cold water supply, including all CPVC plain & brass threaded fitting,i/c fixing the pipes with clamp at1.00m spacing.This includes 15 mm nominal outer dia pipes |
| 96 | Providing and fixing P.T.M.T. / C.P. extentsion Nipples 15mm size with 12” BSP threads, 70mm length and 30 mm bredth and weight not less than 18gms |
| 97 | Providing And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 98 | Providing and fixing C.P. brass Stop Cock (concealed) of standard designand of approved make conforming to IS 8931 15mm nominal bore, approved brand C.P. fittings. |
| 99 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 100 | Wiring for Circuit/submain wiring along with earth wire with the following sizes PyC insulated copper conductor,single core cable in surface/recessed PVC conduit as required (i) 1.7.1 2 x1.5sq.mm. + 1 x1.5sq.mm.earth wire |
| 101 | S/F Modular Boxes,base &cover plate Supplying and fixing following size / modules Gl box along with modular base &cover plate for modular switches in recess etc as required. (i)1 or 2 Module(78mm x 78mm x 45mm) |
| 102 | (ii) 8/9 module(78mm x 230mm x 60mm) |
| 103 | (i)12 Module(135mm x 205 mm x 60mm) |
| 104 | S/F Ceiling Rose:Supplying and fixing 2 pin 5 amp ceiling rose on the existing junction box/wooen block including connection etc as required.Make : Anchor /Kona /Kany |
| 105 | S/F Batten /Angle Holder:Supplying and fixing batten /angle holder including connection etc as required |
| 106 | S/F Panel mounted TP &N in Cubical Panel board:- Providing and fixing 100 amps TP &N disconnector fuse switch unit inside the exisiting panel board with ISl marked HRC fuses including holes in cubicle panel,making connections etc as required. |
| 107 | S/F S.P MCB DB:-Supplying and fixing following way,single pole and neutra sheet steel MCB distribution board 240 Volts on surface/recess,complete with tinned copper bus bar neutral bus bar earth bar,din bar including powder Painted including earthing etc as required.(But without MCB/RCCB/ Isolator) 8 way single door |
| 108 | S/F Panel mounted change over :- Providing and fixing follwing capacity 4 Pole on load panel monted change over switches in existing cubical palel board making connetion,earthing the body etc as reauired. |
| 109 | Suppling Instalation festing and commissioning of following size celling fan 3 blades confirming to IS:374:2019 including wiring the down roads of standard lenth(up to 30 cm)with 1.5 sqmm FR PVC insulated copper wire suitable for 230v 50 HZW,single phase supply etc complete as required. 1400mm(56\\")ceiling fan |
| 110 | S/F 10/12 watt LED Tube Light |
| 111 | Suppling and fitting 15/16 watt LED Bulb fitting |
| 112 | S/F Modular type switch/Socket :- Supplying and fixing of following modular switch/Soket on the existing modular plate &switch box including connections but encluding modular plate etc as required. 5/6 amps 3 Pin Socket ourt let |
| 113 | 5/6 amps,one way switch |
| 114 | S/F Modular type electronic fan regulator :- Suppling and fixing stepped type fan regulator on the existing modular plate switch box including connections but encluding modular plate etc as reqüired. |
| 115 | Supping XLPE/PVC insulated aluminium conductor armoured cable 1100 V grade with ISI mark three core solid/standed aluminium conductor with 6 mm thick 25 mm width MS spacer with G.I.earth wire 6 sqmm complete in an approved manner as per is 70983.5 core 25 sqmm |
| 116 | Wiring for light/point/Exhaust fan point/call bell point with 1.5 sq.mm FRPVC insulated copper conductor cable in surface/recessed PVC conducit as required. With piano type switch phenolic laminated sheet MS Box earthing the point PVC insulated copper 1.5 Sq.mm FR PVC insulated copper conductor single core cable etc. at required. 1.1.3 Group C |
| 117 | Supplying and fixing kfollowing piano tpe switch/socket on the existing switch box/cover including connections etc as required :- 5/6 amps soclet outlet |
| 118 | Wiring for light/power plug with 2x 4 sq.mm FR PVC insulated, copper conductor ,single core cable in and surface/recessed PVC conduitalong with 1 No. 4 sq mm FR PVC insulated copper conductor single core cable for loop earthing as requried . |
| 119 | Wiring for circuit/sub main wiring along with earth wire with the following sizes of PVC insulated copper conductor single core cable in surface/racessed PVC conduit as required. 1.7.2 :- 2x2.5 sqmm+1x2.5sqmm earth wire |
| 120 | 2x6 sqmm+1x6 sqmm earth wire |
| 121 | Supplying and fixing PVC/G.I. box of 210mm x206 mmx48mm deep on (nominal size (10''x12'')) surface/recessed with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 amp and 15/16 ampsocket outlet and 15/16 amp piano type switch connection etc as required. |
| 122 | ITC exhaust fan upto 450mm sweep |
| 123 | Supplying and fixing following way single pole neutral,sheet MCB distributation board,240 volts on surface/recess, complete with tinned copper busbar, natural busbar,earth bar,din bar, detached gland plate, interconnections, phosphatized and powered painted including earthing etc.as required(but without MCB/RCCB/Isolator) 8 way, double door. |
| 124 | 2.5.1:- 100amp MCB |
| 125 | MV cable laying upto 25 sq Mm in ground - Laying of one nu mber PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 25sq mm. but exceeding 120 sq mm direct in ground including excavation, sand cushioning,protective covering and refilling the trench etc as required. |
| 126 | 12\\" (300mm) Exhaust fan |
| 127 | Supplying LED 10 Watt |
| 128 | Supplying and fixing piano type switch/ socket- 3pin 5/6 amps, socket outlets |
| 129 | 15/16, 6 pin socket outlet |
| 130 | Supplying and fixing of following way three pole & neutral, sheet steel , MCB distribution board 240 volts, on surface /recess , complete with tinned copper bushbars ,neutral busbar, earth bar , din bar ,detachable gland plate , interconnections ,phosphatized and powder painted including earthing etc. as requried. (but without MCB/RCCB/ISOLATOR) 4 way (4+12), single door horizontal type |
| 131 | S-F- C series MCB 6/32/Amps single pole |
| 132 | Supplying Exhaust Fan (15\\") |
| 133 | Add Carriage of Material (i) Cement + Steel |
| 134 | (ii) Sand |
| 135 | (iii) Stone Chips |
| 136 | (iv) Bricks / Paver |
| 137 | (v) Stone Metal |
| 138 | Goods & Service Tax (G.S.T.) - |
| 139 | Labour Cess - Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender