Tender For Renovation Of Old Class Room & Construction Of Boundry Wall At Primary School Shridharpur, Baghmara, Dhanbad.
Tender Value
10.63 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Old Class Room & Construction Of Boundry Wall At Primary School Shridharpur, Baghmara, Dhanbad.
BOQ
| Sl. No. | Item Description |
| 1 | Providing 25mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 2 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M1.5 including screening,curing with all leads and lifts of water scaffolding taxes and royality all complete as per building Specification and direcion of E/I. |
| 3 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M1.5 including screening,curing with all leads and lifts of water scaffolding taxes and royality all complete as per building Specification and direcion of E/I. |
| 4 | Supplying,fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S Angle frame of size 60x60x6mm.including cost of fabrication, providing necessary locking arrangement with haskal and domny dully fixed in P.C.C (1:2:4) blocks of required size,applying a priming red lead paint over steel work,taxes all complete as per drawing Specification and direcion of E/I. |
| 5 | Providing and applying plaster of Paris Putty of 2 mm thickness over Plastered surface to prepars the Surface to prepare the surface even and smooth complete. |
| 6 | Providing two coat of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required scaffolding, washing of floors and taxes all complete as per building Specification and direcion of E/I. |
| 7 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building Specification and direcion of E/I. |
| 8 | Finishing walls with premium acrylic smooth exterior paint do all completet job |
| 9 | Providing and laying polished VITRIFIED FLOOR TILES in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and confirming to IS : 15622 of approved make in all colors and shades laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand) including grouting the joints with cement and matching pigments etc. complete.Size of Tile 600 x 600 mm |
| 10 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.Group C |
| 11 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 1.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 12 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 13 | Supplying and fixing 2 pin 5 amp . Ceiling rose on the existing junction box/wooen block including connection etc.as required. |
| 14 | supplying and fixing batten / angle holder including connection etc. as required. |
| 15 | Supply installation, testing and commissioning of following size ceiling fan 3 Blades confirming to IS:374:2019 includind wiring the down rods of standard length (up to 30 cm) with 1.5 sq mm. FR PVC insulated copper wire suitable for 230 V 50 Hz,single phase supply etc. complete required. 1200 mm dia (48\\")Ceiling Fan |
| 16 | Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. |
| 17 | S.I.T.C of following raiting surface mounted LED tube light fitting suitable for 230 V50 Hz,single phase supply etc.complete as required. 20/22 W LED Tube light |
| 18 | Supplying and fixing following piano type switch socket on the existing switch box/cover including connections etc. as required. Electronic step fan regulator , mini |
| 19 | Providing and fixing following capacity 2 pole/ 4 pole ON/OFF-Load change over switches with side handle operation , in sheet enclosure in existing metal board including drilling holes in metal board , making connection, earthing the body etc. as required.32 amps,2pole |
| 20 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as required |
| 21 | Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode , including soldering etc. as required. |
| 22 | Supplying and fixing PVC /G.I box of following sizes on surface or in recess with suitable size of phenolic laminated sheet cover infront including painting etc as required. 170 mm x 221 mm x 48 mm deep/(8\\" x 10\\") |
| 23 | Supplying and fixing of following sizes PVC conduit along with accessories in surface /reces including cutting the wall and making good the same in case recessed conduit as required (20 mm) |
| 24 | Earth work in excavation in foundation trenches in ordinary soil ( vide classification of soil item A) and disposal of excavated earth as obtained to a distance upto 50M including all lifts leveling ramming the foundation treanches, removing roots of trees, and shrubs all complete as per approved design, building specification and direction of E/I.+Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 25 | Providing coarse clean sand in filling in in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials labour, royalty and taxes all complete as per building specification and direction of E/I (Mode of measurement compacted volume) |
| 26 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 27 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) |
| 28 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 29 | Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. |
| 30 | Providing designation 75B brick work in C.M (1:6 ) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 31 | Providing designation 75 B brick work in C.M. (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including, providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 32 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M1.5 including screening,curing with all leads and lifts of water scaffolding taxes and royality all complete as per building Specification and direcion of E/I. |
| 33 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 34 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.10mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} |
| 35 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I.12mm (TMT coil Fe 500) (only valid for Tata (Tiscon), SAIL, JSPL,Electrosteel Steels Ltd. Bokaro and Vizag (RINL)} |
| 36 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. |
| 37 | Supplying,fitting and fixing M.S grill made of 20x6mm M.S flat as per approved design and drawing, properly fabricated with joints continuos fillet welded and finished smmoth,carriage of grills to work site,hoisting as per building Specification and direcion of E/I.(where materialsis not supplied by the deppt.) |
| 38 | Providing two coats of synthetic enamel paint of approved shade and make over new wooden surface including cleaning the surface after removing dirt including scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specification and direction of E/I. |
| 39 | Carriage of cement |
| 40 | Carriage of sand |
| 41 | Carriage of Chips |
| 42 | Carriage of Bricks |
| 43 | Carriage of Steel |
| 44 | Goods & Service Tax (G.S.T.) - |
| 45 | Labour Cess - Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodaySep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender