Tender For Construction Of 4Acr+Boundry Wall+Toilet & Kitchen At Primary School Ramkanali, Baghmara, Dhanbad.
Tender Value
72.88 Lakhs
Estimated cost
Bid Submission
31 Aug 2026
1 days left
EMD
1.46 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dhanbad → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 4Acr+Boundry Wall+Toilet & Kitchen At Primary School Ramkanali, Baghmara, Dhanbad.
BOQ
| Sl. No. | Item Description |
| 1 | E/W in exavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated Earth as obtained to a distance up to 50m.including all liftS. Levelling, ramming the foundation trenches,removing roots of trees,shrubs all complete as per approved design,building Specification and direcion of E/I+Extra for earthwork in hard soil as per specification and direction of E/I. ( vide classification of soil item-B) |
| 2 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour, royality and all taxes all complete as per building Specification and direcion of E/I. |
| 3 | Providing designation 75B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/I. |
| 4 | Providing P.C.C.M-150 in nominal mix of (1:2:4) in foundation with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.m 2.5 to 3 including screening,shuttering ,mixing cement concrete in mixer and placing in position ,vibrating, striking curing, taxes and royality all complete as per building Specification and direcion of E/I. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level.1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 7 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 8 | Reinforced cement concrete work in arches, archribs, domes, vaults, shells, folded plate and roofs having slope more than 15° up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 9 | Centering and shuttering including strutting propping etc and removal of form -foundation |
| 10 | Centering and shuttering including strutting propping etc and removal of form -Coloumn |
| 11 | Providing designation 75B brick work in C.M(1:6) in foundation and plinth with approved quality of clean coarse sand of F.M2 to 2.5 including providing 10mm thick mortar joints ,cost of screening materials raking out joints to 15mm depth ,curing, taxes and royality all complete as per building Specification and direcion of E/I. |
| 12 | Providing 25mm thick damp proof course with cement concreteM-150 with nominal mix of (1:2:4) with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of F.M 2.5 to 3 including ,screening,shuttering and mixing cement concrete in mixer with 5% cico or any other approved water compound and placing in position , striking ,curing taxes and royality all complete as per building Specification and direcion of E/I. |
| 13 | Providing designation 75B brick work in C.M(1:6) in superstructure with approved quality of clean coarse sand of F.M2 to 2.5 including providing 10mm thick mortar joints ,cost of screening materials scaffolding raking out joints to 15mm depth ,curing, taxes and royality all complete as per building Specification and direcion of E/I |
| 14 | Providing and fixing fan hook of 16mm dia M.S bar 1m long bent to required size and shape,placed in position and fixed in R.C.C slab/beam at the time of casting all complete as per building Specification and direcion of E/I.(where materialsis not supplied by the deppt.) |
| 15 | Providing 25mm thick water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including screening,curing with all leads and lifts of water scaffolding taxes and royality all complete as per building Specification and direcion of E/I. |
| 16 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M1.5 including screening,curing with all leads and lifts of water scaffolding taxes and royality all complete as per building Specification and direcion of E/I. |
| 17 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M1.5 including screening,curing with all leads and lifts of water scaffolding taxes and royality all complete as per building Specification and direcion of E/I. |
| 18 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. |
| 19 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M1.5 including screening,curing with all leads and lifts of water scaffolding taxes and royality all complete as per building Specification and direcion of E/I. |
| 20 | Supplying,fitting and fixing 20 gauge G.C.I sheet gate fitted on M.S Angle frame of size 60x60x6mm.including cost of fabrication, providing necessary locking arrangement with haskal and domny dully fixed in P.C.C (1:2:4) blocks of required size,applying a priming red lead paint over steel work,taxes all complete as per drawing Specification and direcion of E/I. |
| 21 | Supplying,fitting and fixing M.S grill made of 20x6mm M.S flat as per approved design and drawing, properly fabricated with joints continuos fillet welded and finished smmoth,carriage of grills to work site,hoisting as per building Specification and direcion of E/I.(where materialsis not supplied by the deppt.) |
| 22 | Supplying,fitting and fixing M.S grill gate with M.S grills made of 20x6mm M.S flats or 16mm M.S squire bars fitted on 25x25x6mm M.S angle frame of size 60x60x6mm.including cost of fabrication, providing necessary locking arrangement with haskal and domny dully fixed in P.C.C (1:2:4) blocks of required size,applying a priming red lead paint over steel work,taxes all complete as per drawing Specification and direcion of E/I. |
| 23 | Providing and applying plaster of Paris Putty of 2 mm thickness over Plastered surface to prepars the Surface to prepare the surface even and smooth complete. |
| 24 | Providing two coat of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required scaffolding, washing of floors and taxes all complete as per building Specification and direcion of E/I. |
| 25 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 26 | Providing 25mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layers 19mm. Thick (1:2:4)with 12mm to 6mm. Size graded stone chips and top layer 6mm. Thicks (1:2) with 6mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royality with all complete as per building specification and direction of E/I. |
| 27 | Labour for fabricating, erecting, hoistion and fixing in position structrral steel work in R.S. Joist, channel, Angle, Tee, flat, plate, latice member, built up compound section in column, girder, stair case, or truss including cost of gusset plates, holding down bolts, anchor plates at all heights and depths, bolting, welding ( machining wherever necessary) with applying a priming coat of red lead paint all complete as per approved drawing, building specification and direction of E/I. |
| 28 | Providing two coats of plastic emulsion paint of approved shade and make over a coat of cement primer over new surface including preparing plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding washing of floor and taxes all complete as per building specification and direction of E/I. |
| 29 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. Of parry Hindustan or any other I.S.S. Approved make with 100mm H.C.I. 'P' trap 15liters C.I. Pull and let go flushing cistern of names or other I.S.S. Equipment make, complete with all fittings, C.I. or C.C. brackets 32mm alkathene/P.V.C. telescopic flush, pipe about 2 M long with one brass coupling and clamps G.I. chain and pull including supplying and fixing a pert of vitreous white glazed earthenwere were footrest to be fixed in floor 15mm C.I. body brass spindle stope cock of weight not less than 50grms, 15mm P.V.C. connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.A) 580 mm long (c) with 10 lit. Low level PVC Cistern |
| 30 | Providing & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socket ed pipes. 110 mm dia |
| 31 | (vi) 15 mm dia brass bib cock(weight not less than 300gms) |
| 32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL).15MM Dia |
| 33 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing rust dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building Specification and direcion of E/I. |
| 34 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm . |
| 35 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. (Approved Brand - ASTRAL) |
| 36 | Polythene water storage tank of mark with cover and suitable locking system in double layer confirming to IS :120701-1996 with latest revision. |
| 37 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 38 | Finishing walls with premium acrylic smooth exterior paint do all completet job |
| 39 | Supplying, fitting and fixing C.A.R.W.D pipe with necessary strips spikes, bends, shoes etc. including cost of carriage,all cmplete as per building Specification and direcion of E/I. 75MM Dia |
| 40 | providing Tor steel reinforcement of 8mm dia rods as per approved design and drawing exclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. TMT Fe 500 (only valid for SAIL & TATA STEEL) |
| 41 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 42 | providing Tor steel reinforcement of 10mm,12mm,& 16mm. dia bars as per approved design and drawing inclusive carriage of M.S. bars to work site, cutting, bending and binding with annealed wire with cost of the wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 43 | Carriage of materials Bricks |
| 44 | Chips |
| 45 | Cement |
| 46 | Steel |
| 47 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. |
| 48 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 49 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 X 4 sq. mm + 1 X 4 sq. mm earth wire. |
| 50 | Supplying of Fan |
| 51 | Supplting of LED(15/16W) |
| 52 | S/F \\"C\\" series MCB :-Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps. DP |
| 53 | S/F \\"C\\" series MCB :-Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.6/32 amps, single pole. |
| 54 | G.I. earth pipe eletrude with salt/charcoal :- earthing with G.I. earth pipe 4.5 meter long 40mm dia including accessories and providing masonary enclouser with cover plate having locking arrangments and watering pipe etc with chalcoal and salt as required |
| 55 | power pluge wiring in PVC conduct (2x4 sq.mm):- wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 Nos. 4 S.Q. mm FR PVC insulated copper conductor single core cable for loop earthing required |
| 56 | Supplying and fixing 2 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 57 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
| 58 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. |
| 59 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/submain wiring/ cable as required. |
| 60 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper scaffolding , curing and taxes all complete as per building specification and direction of E/I. |
| 61 | Wiring for light/point/Exhaust fan point/call bell point with 1.5 sq.mm FRPVC insulated copper conductor cable in surface/recessed PVC conducit as required. With piano type switch phenolic laminated sheet MS Box earthing the point PVC insulated copper 1.5 Sq.mm FR PVC insulated copper conductor single core cable etc. at required.1.1.3 Group C |
| 62 | Supplying and fixing suitable size GI box of following size 210mmx206mmx48mm deep/(10''x12'') , connection painting etc.as reqd. |
| 63 | Supplying and fixing piano type switch/ socket 3pin 5/6 amps, socket outlets |
| 64 | 15/16, 6 pin socket outlet |
| 65 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per building specification and direction and E/I.With \\"A\\" grade white 15X15cm Tiles. |
| 66 | Supplying and fixing of following way three pole & neutral, sheet steel , MCB distribution board 240 volts, on surface /recess , complete with tinned copper bushbars ,neutral busbar, earth bar , din bar ,detachable gland plate , interconnections ,phosphatized and powder painted including earthing etc. as requried. (but without MCB/RCCB/ISOLATOR) 4 way (4+12), single door horizontal type |
| 67 | S-F- C series MCB 6/32/Amps single pole |
| 68 | S/F Bitten Holder -Do - -do- |
| 69 | Supplying LED 10 Watt |
| 70 | Supplying Exhaust Fan (15\\") |
| 71 | Goods & Service Tax (G.S.T.) - |
| 72 | Labour Cess - Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 daySep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender