Tender For Provision Of Electrical Work, Fire Protection & Fire Suppression System For Track Store At Yamuna Bank Station Over L-3E&4.
Tender Value
23.08 Lakhs
Estimated cost
Bid Submission
15 Sep 2026
9 days left
EMD
46177
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Electrical Work, Fire Protection & Fire Suppression System For Track Store At Yamuna Bank Station Over L-3E&4.
BOQ
| Sl. No. | Item Description |
| 1 | Total of Schedule-A |
| 2 | Total of Schedule-A Contract No- E/EM/L-3Eand4/2026/02 APPENDIX- 3A PROFORMA FOR STATEMENT OF MINOR DEVIATIONS (Refer Clause C 2.2(d) and C 15.1 of ITT) 1. The following are the particulars of minor deviations from the requirements of the Tender Document: Sr. No Clause Deviations Price reduction for each deviation/s Note : 1. The Tenderer shall indicate price reduction against each deviation in Appendix-3A of BOQ. This price is the price which the tenderer shall reduce from this tender price if deviation(s) is/are accepted by the Employer. 2. Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No Deviations’. In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the tenderer has not proposed any deviations from tender documents. 3. It shall be noted that in case Nil/Zero/NA Price quoted by Tenderer in Appendix-3A then it shall mean that contractor has quoted same price for deviation and undeviation bid. 4. If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender, other than in this Appendix, it will have no effect. Signature of authorized signatory On behalf of Tenderer Contract No- E/EM/L-3Eand4/2026/02 S. No. Preamble |
| 3 | The bill of Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to tenderers, Special Conditions of contract, Employers Requirements, Technical Specfications, GCC etc. |
| 4 | BoQ consists of one schedules i.e. Schedule-A. |
| 5 | Tenderers shall quote their offer in Indian Rupees (₹) only. Tenderers are required to quote percentage (%) (Excess/Less) in figures in the appropriate highlighted cells in Excel sheet namely 'BoQ1' against given schedules. |
| 6 | The rates and prices to be tendered in the unit Priced Bill of Quantities are for completed and finished items of works and complete in all respect. It will be deemed to include Duties, Taxes, Octroi, Royalty etc., cost of all plants, labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification, contractor’s profit and establishment/overheads, together with preparation of design and drawings, all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the contracts. For taxes and duties refer clause C2.4 & C2.5 of ITT & clause 10 of SCC. |
| 7 | If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non-responsive and shall be rejected. |
| 8 | Errors will be corrected by the employer for any arithmetical errors in computation or summation as per contract conditions. |
| 9 | The Financial Proposal (as per BOQ) shall be uploaded online on the website http://eprocure.gov.in/eprocure/app. The rates shall be quoted in the excel file provided in the bid documents. The tenderer shall download the excel file and quote the rates in BOQ1. After quoting their rates the excel file shall be uploaded accordingly. The rates shall not be offered/quoted elsewhere in the technical submission/ tender submission. |
| 10 | The actual work executed against all the BOQ as detailed in tender document would be paid as per clause-16 of ER. |
| 11 | The price offer in BOQ shall be given without consdering any deviation mentioned in Appendix-3 of FOT i.e. price in this box shall be quoted as per tender condition without any deviation. Bill of Quantity (BOQ) Name of work: Contract:-E/EM/L-3Eand4/2026/02: “Provision of Electrical work, Fire Protection & Fire Suppression System for Track store at Yamuna Bank Station over L-3E&4.\\". Sl. No. DESCRIPTION Unit Qty Rate (₹) (Excl. GST) Amount (₹) Schedule-A A. Electrical Work |
| 12 | Conduit i Supply and fixing of GI electrical rigid conduit 25mm medium class with accessories on surface/recess (as required as per site condition).Make- as per approved list of DMRC. Mtr. 600.0 167.85 100710.0 ii Supply,laying and fixing of GI flexible conduit of 25 sq mm as per site condition. Mtr. 250.0 36.15 9037.5 iii Dismantaling of existing wire upto size of 10 sq mm from conduits/GI flexible/tray/surface etc .as per site condition. Mtr. 1200.0 15.93 19116.0 |
| 13 | Cabling & Wiring i Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required a upto 35 sqmm Mtr. 250.0 263.98 65995.0 ii Excavation of trench by demolishing of RCC/Stone/Bituminus, removal of pavers & exacvation of trench for cable laying upto depth of 800mm and 400mm width preparation of sand bad, covering of cable with A class brick ( Min. 19brick/meter), refilling, refixing of pavers & bring in original condition . Mtr. 100.0 190.42 19042.0 iii Supplying & Drawing of following sizes of FRLS PVC insulated copper conductor,single core cable in existing surface/recesses steel conduit as required with accessories. a 3x1.5 sqmm Mtr. 700.0 39.43 27601.0 b 3x2.5 sqmm Mtr. 500.0 55.48 27740.0 c 3x4.0 sqmm Mtr. 300.0 85.46 25638.0 iv Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required a 2X1.5 sqmm + 1X1.5 sqmm earth wire Mtr. 400.0 146.39 58556.0 b 2X2.5 sqmm + 1X2.5 sqmm earth wire Mtr. 300.0 162.43 48729.0 c 2X4.0 sqmm + 1X4.0 sqmm earth wire Mtr. 200.0 187.15 37430.0 |
| 14 | Switch & Sockets i Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. a 5/6A Switch No 100.0 55.49 5549.0 b 15/16A Switch No 50.0 85.62 4281.0 c 3 pin 5/6A socket outlet No 30.0 70.7 2121.0 d 6 pin 15/16A socket outlet No 30.0 112.12 3363.6 ii Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required.Confirming to relevant BIS/IS with samples need to be approved by DMRC Engineer In-charge. a 1 or 2 Module (75mmX75mm) No 20.0 159.14 3182.8 b 3 Module (100mmX75mm) No 30.0 174.8 5244.0 c 6 Module (200mmX75mm) No 25.0 225.08 5627.0 d 12 Module (200mmX150mm) No 10.0 297.78 2977.8 |
| 15 | Distribution Board i Supplying and fixing of following ways surface/recess mounting, vertical type, 415V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200A tinned Cu bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note: Vertical type MCB TPDB is normally used where 3 phase outlets are required.) a 8 way (4+24), double door No 2.0 6933.74 13867.48 b 12 way (4+36), double door No 3.0 8753.63 26260.89 ii Supplying and fixing 5A to 32A rating, 240/415V, 10KA, \\"C\\" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc as required a Triple pole and neutral No 10.0 837.64 8376.4 iii Supplying and fixing following rating, four pole, (three phase and neutral), 415V, residual current circuit breaker (RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connections, testing and commissioning etc. as required a 25A No 10.0 1763.96 17639.6 |
| 16 | Terminations i Supplying and making end termination with brass double compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. a 4x25sqmm (28mm) No 10.0 171.51 1715.1 |
| 17 | Miscellaneous i Dismantalling of existing different capacities and type of light fitting from wall/ceiling/ fabricated beam stairs upto the height of 30 feet. No 20.0 217.03 4340.6 ii Fixing of different size and capacities of light fitting from wall/ceiling/fabricated beam stairs upto the height of 30 feet with suitable size of nuts and bolts if required and other related accessories complete in all respect. No 30.0 229.14 6874.2 iii Supplying and fixing GI Clamp for GI conduit No 300.0 165.0 49500.0 iv Dismantalling of Distribution board 8 way and 12 way. No 5.0 2750.0 13750.0 B. Fire Detection System |
| 18 | Supply & Installation of Addressable 2 Loop Fire Alarm Control Panel (FACP), QWERTY Keypad, Expandable up to 10 Loop with battery charger, power supply and with the battery backup for 8 hours normal operation and one hour alarm operation. The FACP shall include a full featured operator interface control and annunciation panel that shall include a backlit 640- character liquid crystal display, NAC code function, System should support up to 159 detectors and 159 modules in one Loop. The panel shall be UL listed and FM approved and comply UL 864, 9th Edition requirement. The enclosure shall also be UL listed. The quoted rate shall include supply of necessary software, hardware and all accessories required for proper functioning of the panel with all necessary licence. |
| 19 | Supply & installation of UL listed addressable Photo Smoke/Thermal multi sensor detector With Base including all retrofitting work required for proper working of the system. The detector shall have twin bi-colour LED for 360 deg viewing and analog value for detailed data analysis. Addressing shall be with user friendly rotary decimal switches. The detector shall meet UL268, 7th guideline. |
| 20 | Supply & installation of UL listed addressable Manual Call Point including all retrofitting work required for proper working of the system. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device. The device shall comply UL approval. |
| 21 | supply & installation of Addressable UL Listed Control Modules required for Sounders / Strobes / Sounder cum Strobes. The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. |
| 22 | Supply & installation of UL Listed Hooter with strobe installation including all retrofitting work required for proper installation and working of the system Sounder cum Strobe rated at 80 dBA @ 3m for Audible annunciation and 115cd flashing at 1 Hz for visual indication. |
| 23 | Supply installation of UL Listed Isolator Module. Installation including all retrofitting work required for proper installation and working of the system for Isolating short/ dewired/ loose circuits with automatic resetting arrangement. The device shall have an LED which shall blink in nomal state & get steady on activation to monitor the health status of the device. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. |
| 24 | Supply & installation of UL Listed Repeater panel including all accessories required for complete installation and working of Panel. Repeater panel shall have at least 160-character display. |
| 25 | Excavation of trench by demolishing of RCC/Stone/Bituminus, removal of pavers & exacvation of trench for cable laying upto depth of 800mm and 400mm width preparation of sand bed, covering of cable with A class brick ( Min. 19brick/meter), refilling, refixing of pavers & bring in original condition . |
| 26 | Supply & installation of Gl junction Boxes 75*75mm forDetector installation including all retrofitting work required for proper installation of the system |
| 27 | Supply & installation of Gl junction Boxes 100*100mm withall accessories for Module/MCP installation including allretrofitting work required for proper installation of thesystem. |
| 28 | Supply & installation of Armoured FS Copper Conductor Cable, 2Cx1.5 sq.mm. BS7846, Make KEI / Polycab / Bonton/Havells India Ltd or as per DMRC approved on wall surface/tray to be clamped with 1mm thick saddle. |
| 29 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc conforming to IS 14930, Part II complete with fitting and cutting jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required (For Repeater Communication) 90mm dia (OD-90mm & ID-76mm nominal) |
| 30 | Programming. Testing and commissioning of all the abovementioned parts along with accessories, software required for complete integration with system, programming. logic creation, testing and commissioning. C. Fire Suppression System |
| 31 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required 1.a 80mm MS Pipe Mtr 40.0 645.22 25808.8 1.b 100mm MS Pipe Mtr 130.0 862.01 112061.3 |
| 32 | Providing and fixing rubber/thermoplastic synthetic hose reel tube 25mm dia 45 mtr length confirming to IS: 444-1987/ 12585-1988 type-II on hose reel drum & duly ISI marked |
| 33 | Providing and fixing wall mounting swinging type hose reel drum ISI marked for housing 25mm dia, 45 Mtr length hose reel tube confirming to IS 884 |
| 34 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as requiredButterfly 80 MM |
| 35 | Providing and fixing of stainless steel shut off Nozzle 5mm dia bore (Orifice) confirming to IS: 8090 with serrated tail for 25 mm dia hose reel pipe with supply of necessary jubilee clip of requisite size. |
| 36 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : 6.a Single headed Stainless steel Set No 2.0 3981.1 7962.2 |
| 37 | Providing and fixing of 25mm dia union assembly on threaded joints at required locations |
| 38 | Providing and fixing of different size of ball valves:25 mm |
| 39 | Excavation as per general profiles and back filling for all kinds of soil and rebuilding/providing of RCC ,CC, bituminious road. Total Schedule A (Without GST) 1956647.17 GST@18% 352196.49 Total Schedule A (Including GST) 2308843.66 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 15, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysSep 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender