Tender For Construction Of 40.00 Mtr. Span Single Pre-Stressed Steel Bridge Over Lingti Khad On Nagri Rakh Society Mani-Mahesh Road At Rd 4/130 (Sh:- Construction of Sub-Structure, Super-Structure & Approaches Of 25.00 Mtr. Span Reinforced Cement Con
Tender Value
2.16 Crore
Estimated cost
Bid Submission
01 Sep 2026
4 days left
EMD
4.33 Lakhs
Bank guarantee accepted
Document Fee
7000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 40.00 Mtr. Span Single Pre-Stressed Steel Bridge Over Lingti Khad On Nagri Rakh Society Mani-Mahesh Road At Rd 4/130 (Sh:- Construction of Sub-Structure, Super-Structure & Approaches Of 25.00 Mtr. Span Reinforced Cement Concrete Box Girder Bridge At Rd 4/130) (Cm Announcement).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation for all type of bridge structure in all type of classification of soil, comprising of ordinary soil, ordinary rock, hard rock chiseling / wedging out rocks (where blasting is prohibited) as per drawing and MORT&H technical specification section 300 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable / approved materials to the original surface in layers not exceeding 150 mm (one hundred fifty millimetres) compacted thickness including shoring and strutting, pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 2 | Providing and laying mechanically mixed and vibrated concrete for plain cement concrete, M-10 Grade (M-Ten) Nominal mix 1:3:6 (one cement : three sand : six graded crushed stone aggregate (40mm) forty millimeters nominal size)on ground or under water in open foundations for all types of structures, including pumping or bailing out water/dewatering (surface and sub-soil water) and removal of the slush which may arise at the time of laying concrete, for all heights/depths and any quantum of water, including cost of form work and curing complete as per drawing and MORD technical specification section 800,900, 1200 and as per the direction and the entire satisfaction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 3 | Providing and laying mechanically mixed and vibrated reinforced cement concrete in sub structure Grade-M-30 (M-Thirty) designed mix with cement contents not less than of 407 Kg (Four hundred seven Kilogram) per cubic meter with 20mm (twenty millimeter) nominal size graded crushed stone aggregate in Abutment, Bed Block, Dirt wall etcetera for all heights/depths, including cost of form work and curing complete but excluding the cost of reinforcement for reinforced concrete work as per drawing and MORTH technical specification section 1500, 1700, 2200 and as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 4 | Supplying fitting and placing HYSD bar reinforcement Fe-500D of SAIL/ TATA TISCON/ JINDAL (JSPL) in sub-structure complete with straightening, bending, binding of bars including cost of binding wire in all heights/ depths as per drawing and MORTH technical specifications section 1600 and 2200 and as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 5 | Providing and laying mechanically mixed and vibrated reinforced cement concrete in sub structure grade M-20 (M-Twenty) design mix with cement contents not less than 350 kg (Three hundred fifty killogram) per cubic metre with 20mm (Twenty millimetres) nominal size graded crushed stone aggretgate in bed block etcetra as per drawings and MORD technical specifications section 800, 900 and 1200 including the cost of form work and curing complete but excluding reinforcement including carriage of materials with in all leads, lifts and other incidental and as per the entire satisfaction and directions of Engineer-in-Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.t. |
| 6 | Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm (Six hundred millimetre) with smaller size towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to a firm condition complete as per drawing and MORT&H technical specification clause 710.1.4.of IRC:78 and section 2200 as per the entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 7 | Providing 110mm dia ( One Hundred ten millimetre) diameter with working pressure not less then 4.00 kg/cm2 (four point zero per square centimetre) ISI maked P.V.C. pipe weep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast walls through the full width of the structures with slope of 1(V): 20 (H) (one vertical: twenty horizontal) towards draining face complete as per drawing and M.O.R.D. technical specifications section 700, 1200 and as per the entire satisfaction and direction of Engineer- in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 8 | Supplying, fitting and fixing in position true to line and level cast steel rocker bearing conforming to IRC: 83(Pt.-1) section IX and section 2000 of MoRTH specifications complete with all accessories as per drawing and Technical Specifications or as directed by the Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 9 | Supplying, fitting and fixing in position true to line and level forged steel roller bearing conforming to IRC: 83(Pt.-1) section IX and section 2000 of MoRTH specifications complete with all accessories as per drawing and Technical Specifications or as directed by the Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 10 | Providing and laying mechanically mixed and vibrated reinforced cement concrete in super structure Grade-M35 (M-Thirty Five) designed mix with cement contents not less than 422 kgs. (four hundred twenty two kilograms) per cubic meter with 20mm (Twenty millimeter) nominal size graded crushed stone aggregate in Deck slab, wheel guard and the like for all heights, including cost of form work and curing complete but excluding the cost of reinforcement for Reinforced concrete work as per drawing and MORD technical specification section 800, 900 and 1400 complete as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 11 | Supplying fitting and placing HYSD bar reinforcement Fe-500D of SAIL/ TATA TISCON/ JINDAL (JSPL) in super structure complete with straightening, bending, binding of bars including cost of binding wire as per drawing and MORTH technical specifications section 1600 and 2300 and as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 12 | Providing and laying mechanically mixed and vibrated plain cement concrete design mix to obtain the minimum compressive strength of grade M-15 (M-fifteen) with minimum cement content not less than 275 kg ( two hundred seventy five) kilogram per cubic metre in levelling course below approach slab and curing complete as per drawing and MoRTH technical specification section 1700 and 2700 including the cost of form work complete including carriage of material with in all leads, lifts and other incidental. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 13 | Providing and laying mechanically mixed and vibrated reinforced cement concrete grade design mix to obtain minimum compressive strength of grade M-30 (M-thirty) using cement contents not less than 407 Kg (Four hundred seven kilograms) per cubic metre with 20mm (Twenty millimeters) nominal size graded crushed stone aggregate in approach slab including cost of form work and reinforcement and curing complete as per drawing and MORTH technical specification section 1500, 1600, 1700, 2700 and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 14 | Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade-M-30 (M-Thirty) designed mix with cement contents not less than 430 kgs. (four hundred thirty kilograms) per cubic meter with 20mm (twenty millimeter) nominal size graded crushed stone aggregate in Wearing Coat including cost of reinforcement for reinforced concrete work form work and curing complete, as per drawing and MORD technical specification section 800, 900, 1000 and 1400 and as per the direction and entire satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 15 | Construction of reinforced cement concrete railing with mechanically mixed and vibrated M-30 grade (M-Thirty grade design mix cement concrete having cement contents not less than 407 kg (four hundred seven killogram) per cubic metre using graded crushed stone aggregate 12 mm (twelve millimetre) nominal size in cast in situ and precast members and curing complete; constructing railing true to line and grade, tolerance of vertical railing post not to exceed 1 in 500 (one in five hundred), centre to centre spacing between vertical post not to exceed 2000 mm (two thousand millimetre) including the cost of reinforcement and form work as per drawing and MORTH technical specifications section 1500, 1600, 1700, 2700 including carriage of materials within all leads and lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 16 | Providing and fixing MS drainage spouts complete with 100mm (One hundred millimetre) dia galvanized mild steel down pipe corrossion resistant structural steel grating complete as per Drawing and MORTH Technical Specifications section 2700 and as per the direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 17 | Providing and laying strip seal expansion joint catering to maximum horizontal movement upto 70 mm (seventy millimetre) complete as per approved drawings and standard specification to be install by the manufacturer/ supplier compliance to the manufacturer's instructions for installation complete as per drawing and MORTH technical specification 2600 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 18 | Providing and fixing in position 20 mm (twenty millimetre) thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m (ten metre) to cater for a horizontal movement upto 20 mm (twenty millimetre), covered with sealant complete as per drawing and technical specifications 2607 complete in all respect including carriage of material within all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer – in- Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 19 | Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 (Six) percent bitumen by weight complete in all respect including carriage of material within all leads, lifts and other incidentals as per the entire satisfaction and direction of Engineer – in- Charge. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 20 | Earth work in excavation for all types of road structures such as retaining walls, breast walls, culverts, drains, parapets and other similar structures in all kinds and classification of soil, comprising of ordinary mix soil, ordinary rock, hard rock, chiseling/wedging out rocks (where blasting is prohibited) complete in accordance with the lines and dimensions shown in the drawings, including setting out, construction of shoring, bracing, removal of stumps and other deleterious materials and disposal of excavated material upto any leads and lifts including dressing of sides and bottom and backfilling in trenches with excavated suitable approved materials to the original surface in layers not exceeding 150mm (one hundred fifty milimeters) compacted thickness including shoring and strutting and pumping or bailing out water (surface and sub-soil water) up to any depth and any quantum of water and cleaning of slush which may arise out during dewatering complete as per drawing and MORD Technical Specification section 300 & 1600 as per the direction and the entire satisfaction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 21 | Providing and laying mechanically mixed and vibrated concrete for plain cement concrete nominal mix 1:4:8 (One cement isto four sand isto eight graded crushed stone aggregate 40mm (Forty millimeter) nominal size), on ground or under water for all type of structure, in R/wall / B/wall and the like etcetera complete including pumping or bailing out water, dewatering (surface/sub soil water)including removal of slush which may arise at time of laying concrete for all heights/depths including cost of form work and curing complete for 14 (fourteen) days as per drawing and MORD Technical specification section 800, 900, 1200 and 1600 as per entire satisfaction and directions of Engineer-in-charge, including carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 22 | Back filling with granular materials behind abutment, Retaining wall/Breast wall, Wing walls and the like complete as per drawings and MORD technical specification section1200,1600 and as per direction and entire satisfaction of the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 23 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drains and foundation of all other structures or other sources graded and compacted in 200mm (two hundred millimeter) thickness in every layers and compacted with three wheel road roller 80-100 (eighty- one hundred) KN static weight roller to meet the requirements of table 300.1 & 300.2 as per MORD technical specification section 300 and 1600 and as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 24 | Providing 110mm dia ( One Hundred ten millimetre) diameter with working pressure not less then 4.00 kg/cm2 (four point zero per square centimetre) ISI maked P.V.C. pipe weep holes in brick masonry/ stone masonry, plain/reinforced concrete abutment, wing wall, return wall and retaining/breast walls through the full width of the structures with slope of 1(V): 20 (H) (one vertical: twenty horizontal) towards draining face complete as per drawing and M.O.R.D. technical specifications section 700, 1200 and as per the entire satisfaction and direction of Engineer- in-Charge including carriage of materials within all leads, lifts and other incidental . The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 25 | Providing, laying, Soling 90 to 45mm ( Ninety to forty five milimetre) nominal size Grading-1, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 Kn. Static roller in stages to proper grade and camber, applying and brooming, stone screening/ binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 1 as per technical specification Clasue 405 as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 26 | Providing, laying, spreading by mechanically means and compacting to 75mm (seventy five millimeter) compacted thickness, crushed stone aggregates of Grading-II, 63mm to 45mm (sixty three millimeter to forty five millimeter) nominal size to water bound macadam specification including spreading in uniform thickness using templates, hand packing rolling with three wheeled roller 80-100 (eighty to One hundred) kN static weight in stages to proper grade and camber including applying and brooming stone screening Type-B of size 11.2 mm (eleven point two millimetre) nominal size at the rate of 0.20 (zero point two zero) cubic metre per 10 Sqm. (ten square metre) and binding material at the rate 0.06(Zerro point Zero six)cubic metre per ten square metre to fill up the interstices of coarse aggregate, watering and compacting to the required density as per MORD Technical specification section 400 and as per direction and satisfaction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.. |
| 27 | Providing and applying primer coat with bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface with hydroulic brooms and spraying primer with bitumen emulsion pressure distributor at the rate of 0.85 kg (zero point eight five kilogram) per square meter as per MORD Technical specification section 500, as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 28 | Providing and applying tack coat with bitumen emulsion (RS-I) including cleaning the road surface with hydraulic brooms and spraying with emulsion pressure distributor at the rate 0.275 kg (zero point two seven five kilogram) per square meter on the prepared granular surface treated with primer complete as per MORD Technical specification section 500 and as per the entire satisfaction and direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST.. |
| 29 | Providing , laying and rolling of open graded premix carpet of 20mm (Twenty millimetre) compacted thickness, composed of type-A 13.2mm (Thirteen decimal two millimetre) nominal crushed stone aggregate in ration of 2:1 (two is to one) respectively at the rate 0.27cum (Zero point two seven cubic metre) mixed with penetration grade bitumen VG-10 (Vescosity grade ten) at the rate 14.6 kg. (fourteen point six kilogram) per ten square metre laid on road surface to required line, grade and level to serve as wearing course on a previously prepared base, including mixing and heating binder and aggregate in hot mix plant 30/40 (Thirty/ forty) tonne per hour capacity, transporting mixed material with tipper to site of work by mechanical means and laying with paver finisher to the required grade and camber and rolling with a three wheel 80-100 (Eighty-hundred) KN static road roller, finished to required level and grades to be followed by seal coat as per MORD technical specification clause 506 including hauling of as per entire satisfaction and direction of Engineer-in-charge including carriage of material with in all leads and lifts and other incidental. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. |
| 30 | Providing and laying seal coat for sealing the voids in a bituminous surface laid to specified level grade and cross fall using type-B as per MORD technical specification Clause 508 with bitumen binder VG-10 (Viscosity grade ten) at the rate of 6.80 kg (Six point eight zero kilogram) mixed with 0.06 (zero point zero six) cubic metre of fine aggregate per ten square metre heated in mini hot mix plant and laying manually of mixed material and rolling with power road roller 8-10 tonne ( eight to ten tonne capacity) including carriage of material labour and equipment required to execute the work to the site of work complete in all respect. The rate is including octroi, royality, malkana,toll tax or other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender