Tender For Construction Of Accomodation For Farash At Jawahar Nagar Srinagar.
Tender Value
8 Lakhs
Estimated cost
Bid Submission
10 Sep 2026
11 days left
EMD
16000
Bank guarantee accepted
Document Fee
300
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Accomodation For Farash At Jawahar Nagar Srinagar.
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead of area of 3 sqm. and below |
| 3 | Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead of sectional area 40 sqcm. and above. |
| 4 | Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead of G.S. Sheet |
| 5 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 6 | Providing and laying of stone soling,hand packed including all carriages. |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1 :4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2 :4 (1 cement :2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form work for. |
| 12 | Foundations, footings, bases of columns etc. for mass concrete. |
| 13 | Suspended floors, roofs, landings, balconies and access platforms. |
| 14 | Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 15 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):KD |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): POPULAR WOOD |
| 17 | Labour Charges for hoisting and fixing trusses/ purlins/ rafters/posts/post- plates or like components including cost ofscrews etc. complete in all sorts of timber. |
| 18 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited in layer by ramming and watering, lead upto 50 m and lift upto 1.5 m |
| 19 | Providing and fixing 35 mm thick paneled door shutters, including ISI marked black enameled M.S. butt hinges with necessary screws including paneling of 12mm thick decorative Nova pan Particle board both sides laminated as per the approved design complete with required beading/moldings. (styles and rails shall be of standard size) First. Class K.D/Silver wood. |
| 20 | Providing and fixing glazed shutters 35 mm thick for doors, windows and clerestory windows using 3.5 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screw with ALL FITTINGS AND FASTNINGS LIKE HANDLE, TOWER BOLT100 mm etc . Including two or more coats of synthetic enamel paint with one of coat of wood primer, of K.D Wood including all hardware fittings. |
| 21 | Providing and fixing 35 mm thick wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws . Including two or more coats of synthetic enamel paint with one of coat of wood primer KD wood |
| 22 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 up to floor v level curing in : Cement lime mortar 1:1:6 ( 1 cement : : 6fine sand) |
| 23 | 15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 24 | Providing and fixing Ist quality ceramic glazed wall tiles (Digital Series) conforming to IS : 13753 (thickness to be specified by the manufacturer or minimum thickness 5mm), of approved make like AGL, NITCO,ORIENT, SOMANY, KAJARIA, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade upto floor V level complete. |
| 25 | Providing and fixing Ist quality ceramic glazed floor tiles (Digital Series and Anti skid) conforming to IS : 13753 (thickness to be specified by the manufacturer or minimum thickness 5mm), of approved make like AGL, NITCO,ORIENT, SOMANY, KAJARIA, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in- Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade upto floor V level complete |
| 26 | Providing and fixing pre- colour coated corrigated galvanised steel sheet for fencing in horizontal/ vertical / curved position 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete. |
| 27 | Providing and fixing plain ornamental eaves boarding with necessary fittings 250 mm*35 mm of budloo wood |
| 28 | Providing and applying white cement based putty of specified thickness,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2mm |
| 29 | Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade.Two or more coats on new work |
| 30 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 31 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 32 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, two or more coats on new work. |
| 33 | Construction of brick masonary man hole on a base of cement concrete 1:2:4 with plastering the inner surface in 1:4 cement mortar with a coat of floating cement concrete with MS /CI manhole cover and frame all complete as per the directions of incharge engineer at site. |
| 34 | Providing and fixing of PVC pipes and fittings Type B (prince,fenolic or equivalent) |
| 35 | 75 mm plain bend |
| 36 | 100 mm plain bend |
| 37 | 100 mm plain Tee |
| 38 | collar 75 mm |
| 39 | collar 100 mm |
| 40 | Floor trap 75 mm |
| 41 | Floor trap 100 mm |
| 42 | 100 mm dia pipe |
| 43 | 75 mm dia pipe |
| 44 | P/F 3 layer PP-R pipes conforming to Ais 1580I,uv stabilized & anti-microbial fussion welded , having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in- charge.19.2.2 Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 45 | PN-20 Pipe, 25 mm OD(SDR-7.4) Work - Concealed work including cutting chases and making good the wall etc. |
| 46 | Internal work-exposed on wall with clampsat 1.00 meter spacing.PN-20 pipe , 32mm OD(SDR-7.4) |
| 47 | Ball Valve 25 mm dia. Nominal bore |
| 48 | Ball Valve 32 mm dia. Nominal bore |
| 49 | Male Thread adaptor 25x20mm dia. Nominal bore |
| 50 | Male Thread adaptor 32x20mm dia. Nominal bore |
| 51 | Providing and fixing of CP brass fittings of standard quality and make jaguar/equielant |
| 52 | Angle value |
| 53 | Health focuit with chain tube |
| 54 | CP grating |
| 55 | Soap case |
| 56 | Corner shelf |
| 57 | Wall mixer (Non -Telephonic) |
| 58 | Angle Valve (2 in 1) |
| 59 | Towel Rail single 600 mm long |
| 60 | CP nipple 25 mm to 50 mm long 15 mm dia |
| 61 | Brush holder |
| 62 | Towel Ring 20 mm dia |
| 63 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete. |
| 64 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Semi rigid pipe 40 mm dia |
| 65 | Providing and fixing unplasticized PVC connection pipe with brass unions 30 to 45 cm of 15 or 20 mm nominal bore |
| 66 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 67 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass singlehole basin mixer |
| 68 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 69 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required .White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 70 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI mark 4 layer (syntex,vectus, supermen or eqv) ISI:12701marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 71 | Carriage of material by mechanical transport from source upto site of work. |
| 72 | Sand,. Stone aggregate below 40mm nominal size. (15 Kms) |
| 73 | Bricks (20 Kms) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender