Tender For Construction Of Sub-Registrar Office Building At Gaisilet Of Gaisilet Tahasil In The District Of Bargarh For The Year 2025-26
Tender Value
1.41 Crore
Estimated cost
Bid Submission
01 Sep 2026
6 days left
EMD
1.41 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Sub-Registrar Office Building At Gaisilet Of Gaisilet Tahasil In The District Of Bargarh For The Year 2025-26
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation in hard soil with all lead & lift including dressing & levelling the bed of the foundation to the required width & depth & stacking the excavated materials away from the working areas as per the direction of E.I.C. |
| 2 | Providing and filling clean dry sand of approved quality from approved quarry in foundation and plinth in 9\\" thick layer well watered and rammed incl. cost,conveyance, royalties and taxes of all materials etc. |
| 3 | C.C.(1:3:6) using 40mm HG metal of approved quality from approved quarry incl. hoisting, laying concrete in layers not exc. 15cm thick, compacting curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials,cost of labour and T&p etc. all complete as per the direction of E.I.C. .( For foundation) |
| 4 | C.C.(1:2:4 ) using 12mm HGCB chips of approved quality from approved quarry incl. hoisting, laying concrete in layers not exc. 15cm thick, compacting by means of vibrator, curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials, cost of labour and T&p etc. all complete as per the direction of E.I.C.. |
| 5 | R.C.C. work of M - 20 grade with 20 mm and down grade HGCB chips incl. hoisting, laying concrete in layers not exc. 15cm thick, compacting by means of vibrator, curing,finishing the exposed surface smooth, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance, royalty & taxes of all materials, cost of labour and T&p etc. all complete as per the direction of E.I.C..-In foundation and plinth (Ground Floor) |
| 6 | Plinth band (Ground Floor) |
| 7 | Lintel (Ground Floor) |
| 8 | Lintel-1ST floor |
| 9 | Roof Slab -Ground Floor |
| 10 | Roof Slab-1ST floor |
| 11 | Roof Slab-2nd floor |
| 12 | Chajja (Ground Floor ) |
| 13 | Chajja-1ST floor |
| 14 | beam and column-Ground Floor |
| 15 | beam and column-1ST floor |
| 16 | beam and column-2nd floor |
| 17 | Staircase-Ground Floor |
| 18 | Staircase1ST floor |
| 19 | Cutting, straightening, coiled or bent up T. S. rod for R.C.C. work incl. bending, binding & tying the grills and placing in proper position with cost, conveyance,taxes of binding wire 18 to 20 gauge and T.S. rod, cost of all labour & T&P etc complete as per the direction of E.I.C.( Ground Floor). |
| 20 | Cutting, straightening, coiled or bent up T. S. rod for R.C.C. work incl. bending, binding & tying the grills and placing in proper position with cost, conveyance,taxes of binding wire 18 to 20 gauge and T.S. rod, cost of all labour & T&P etc complete as per the direction of E.I.C-1ST floor |
| 21 | Cutting, straightening, coiled or bent up T. S. rod for R.C.C. work incl. bending, binding & tying the grills and placing in proper position with cost, conveyance,taxes of binding wire 18 to 20 gauge and T.S. rod, cost of all labour & T&P etc complete as per the direction of E.I.C-2nd floor |
| 22 | Flyash brick masonry in C.M. (1:6) using brick of size 25cmx11cmx 8cm of crushing strength not less than 75kg/cm2 with dimentional tolerance plus minus 8% after immersing the bricks for six hours befour use incl.lowering, placing in position, watering and curing and cost, conveyance, royalties and taxes of all materials, cost of labour & T&P etc. complete as per the direction of E.I.C..(For foundation and plinth). etc all complete. |
| 23 | In superstructure-Ground Floor |
| 24 | In superstructure-1ST floor |
| 25 | In superstructure-2nd floor |
| 26 | 12mm thick cement plaster (1:6) for brick work after racking out joints incl.watering, curing etc. complete with cost, conveyance, royalties & taxes of all materials, labour and T&P etc complete as per the direction of E.I.C..( Ground Floor). |
| 27 | 1ST floor |
| 28 | 2nd floor |
| 29 | 20mm thick grading plaster (1:4),finished smooth over roof slab after cleaning the surface incl.watering, curing etc. complete with cost, conveyance, royalties & taxes of all materials, labour and T&P etc complete as per the direction of E.I.C..( Ground Floor ). |
| 30 | 1ST floor |
| 31 | 2nd floor |
| 32 | Head Room |
| 33 | Finishing wall surface with acrylic wall putty water based of approved make and finished smooth and even surface to receive painting incl. cost of all material, labour and T&P etc. complete.(Ground Floor) |
| 34 | 1ST floor |
| 35 | 2nd floor |
| 36 | Distempering two coats with approved shade incl. cost of all material, labour and T&P etc. complete. ( Ground floor). |
| 37 | 1ST floor |
| 38 | 2nd floor |
| 39 | Painting two coats with approved paint to doors and windows over a coat of primer incl. cost of all material,T&P and labour etc complete. ( for Iron work )Ground Floor |
| 40 | 1ST floor |
| 41 | 2nd floor |
| 42 | Fixing glazed tiles in floors on 25 mm thick bed of cement morter (1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles incl. rubbing and polishing complete incl. cost of tile etc all complete.(Ground Floor) |
| 43 | 1ST floor |
| 44 | Fixing vetrified tiles in Dados on 12 mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shades of the tiles incl. rubbing and polishing complete incl. cost of tile etc all complete.(Ground Floor) |
| 45 | 1ST floor |
| 46 | STAIRCASE |
| 47 | 1ST floor |
| 48 | Labour for fitting and fixing doors and windows etc.all complete.-D4 |
| 49 | Labour for fitting and fixing doors and windows etc.all complete.-FG1 |
| 50 | Labour for fitting and fixing doors and windows etc.all complete.-FG1 |
| 51 | Supplying fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32 mm x 2 mm etc complete. |
| 52 | Priming one coat with any approved oil bound cement primer to wall surfaces incl. cost of all material,T&P and labour etc complete. (Ground Floor) |
| 53 | 1ST floor |
| 54 | 2nd floor |
| 55 | Compound Wall |
| 56 | Finishing walls with weather coat of approved shade on new work two coats to give an even shade including cost of paint.Ground Floor |
| 57 | Compound Wall |
| 58 | 1ST floor |
| 59 | Head room |
| 60 | Labour for fitting and fixing of M.S. windows and door shutters and collapsible gate with top and bottom rails in proper position including making holes in walls in proper position including making holes in walls RCC structure and wood work etc. and making good to the damages to walls or RCC structures including mending, or cutting to sizes or grooves in walls and fixing with RCC (1:2:4) with hard black broken granite stone chips of 12mm to 20mm (1/2\\" to 3/4\\") (20mm not to exceed 25% ) with cost, conveyane, royalty and taxes of all materials, labour, T & P articles requried for the work etc complete as per specification and direction of the Engineer-in-Charge.-Ground Floor |
| 61 | First Floor |
| 62 | Head Room |
| 63 | Supplying, fitting & fixing of Flush door as per specification including cost of all materials and labour charges.-Ground Floor |
| 64 | First Floor |
| 65 | Coaltarring two coats with approved Coaltar to wood works incl. cost of all material,T&P and labour etc complete. -Ground Floor |
| 66 | First Floor |
| 67 | Fixing vetrieied tiles in floors of size 600 mm x 600 mm with polymer adhesive and epoxy grouting incl.rubbing and polishing complete incl. cost of tile etc all complete. |
| 68 | P.H works-Supplying all materials,labour,T&P and fitting & fixing of 4.0 kgf/cm2 U-PVC soil waste ventilating pipes and fitting of the following O.D conforming to ISI No.13592/1992 to walls with nails bobbins and wooden plugs or earth work in excavation in all kinds of soil for laying in trenche including jointing with supply of approved rubber lubricant by non-heat application method/as per manufactures specification including tasting and refilling and trenches as per direction of E.I.C.(a)110mm dia.U-PVC SWR pipes |
| 69 | 110mm dia.U-PVC P-trap |
| 70 | 110mm dia.PVC SWR door bend |
| 71 | 110mm dia.U-PVC SWR Double junction door |
| 72 | 110mm dia.U-PVC SWR Single junction door |
| 73 | 110mm dia.U-PVC SWR Offset |
| 74 | 110mm dia.U-PVC SWR plain bend |
| 75 | 110mm dia.U-PVC SWR vent cowl |
| 76 | 125mm dia CP greatings |
| 77 | 75mm dia.U-PVC SWR pipes |
| 78 | 75mm dia.PVC SWR plain bend |
| 79 | 75mm dia.PVC SWR door bend |
| 80 | 75x75x75mm PVC SWR double Junction door |
| 81 | 75mm PVC SWR single equal door Tee |
| 82 | Supplying all materials,labour,T&P cutting holes through brick/stone masonry works including making good the damages in cm(1:4)for taking HCI/PVC pipe & fitting etc. all complete as per PH specification and direction of E.I.C.(b)250mm thick wall |
| 83 | Supplying all materials,labour,T&P and fixing water closet,squatting pan (Indian type W.C pan/Orissa pattern squatting pan)duly embedded in cc(1:5:10)using 4cm size hard granite metal including fixing a pair of vitreous china 250mmx130mmx30mm footrest etc all complete as per specification and direction of the E.I.C.(a)580mm size Orissa pan(Nycer/Cera/Hindware/Parryware) |
| 84 | Supplying all materials, labour, T&P and fixing glazed earth ware squatting plate size (600 x 350x100/ 450x355x100) mm with integral flushing pipe including embedding the plate in 25 mmC.M (1:8) laid over 150 mm C.C (1:4:8) using 40mm h.g metal etc all complete as per specification and direction of the E.I.C.-Cost of squatting urinal (600x355mm) (Nycer/Cera/Hindware/Parryware) |
| 85 | Supplying all materials,labour,T&P and fixing wash down water closet(E.W.C)with integral 'S' or 'P' trap to the floor with wooden plug and CP screw including jointing the trap with soil waste pipe in cm(1:1)etc all complete as per specification and direction of the E.I.C.(a)Wall & Floor Mounted water closet(Viva Standard White 8849) |
| 86 | Supplying all materials,labour,T&P and fixing of plastic seat cover for EWC with chromium plated brass hinges and rubber buffer etc all complete as per specification and direction of the E.I.C. |
| 87 | Supplying all materials,labour,T&P and fixing wash basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in walls and good the damages etc. all complete as per specification and direction E.I.C.550x400mm Counter Down Basin with Oval Shape WHB(Neycer/Parrywear/Cerra/Hindware) |
| 88 | 550mmx400mm size WHB(Neycer/Parrywear/Cerra/Hindware) |
| 89 | Pedestrial for WHB(Neycer/Parrywear/Cerra/Hindware) |
| 90 | Supplying all materials,labour,T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specifications and direction of E.I.C.(a)CP Soap holder |
| 91 | Supplying all materials,labour,T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C. (a)600mmx450mm Mirror |
| 92 | Supplying all materials,labour T&P and fixing standard size glass shelf with CP brass brackets and guard rail complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.(a)(125x600)mm size glass-shelf |
| 93 | Supplying all materials,labour,T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of E.I.C.(a)CP towel rail |
| 94 | CP Towel Ring |
| 95 | Supplying all materials,labour T&P and fitting and fixing 10 Ltrs capacity PVC LL flushing cistern with a pair of CI/MS brackets complete with fittings such as syphonic arrangement,15mm nominal size brass/PVC ball valve with polythene float,CP/Brass handle,unions and couplings for connection with inlet,outlet,over flow pipes,32mm dia PVC flushbend,15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C.(a)10 lit PVC L/L Cistern(Parry ware) |
| 96 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 97 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C |
| 98 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cm(1:1) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.In Ground Floor |
| 99 | In First Floor |
| 100 | Supplying all materials,labour,T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick CP(1:3)joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.(a)In Ground Floor |
| 101 | In First Floor |
| 102 | Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge.In Ground Floor & First Floor |
| 103 | Supplying all materials, labour, T&P and providing kodappa slab in floors, treads and landing on 25mm thick bed of cement mortar 1:1 (1 cement:1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing complete as per direction of the Engineer in charge.In Ground Floor & First Floor |
| 104 | Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the E.I.C.(a) Initial lift up to 1.50m |
| 105 | From 1.5m to 3.00m depth |
| 106 | Supplying all materials labour T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to work sitepayment of royalty taxes etc all complete as per direction of E.I.C.ST |
| 107 | Supplying all materials,labour,T&P and providing cc(1:3:6) with 4cm size hard granite metal including watering,curing,conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per specification and direction of the E.I.C.ST |
| 108 | Supplying all materials,labour,T&P and providing cc(1:1.5:3)with 12mm size HG chips including watering,curing and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.S.T. |
| 109 | Supplying all materials labour T&P and providing brickwork with KB bricks having crushing strength not less than 75kg/cm2 with dimensional tolerance +/-8% including watering,curing conveyance all materials to worksite payment of royality taxes etc. all complete as per specification direction of E.I.C. KB Brickwork in cm(1:4) F&P |
| 110 | Supplying all materials,labour,T&P and providing cement plaster on brick/stone work including watering, curring and conveyance of all materials to work site,payment of royalty,taxes etc all complete as per P.H specification and direction of the E.I.C.-12mm thick CP in cm(1:3) |
| 111 | Supplying all materials labour T&P and providing cement punning for skirting including watering,curing, conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 112 | Supplying all materials labour T&P and providing rigid and smooth centering & shuttering for RCC works including falsework and dismantling them after casting including conveyance of all materials to worksite, payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 113 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending,binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge,conveyance of all materials to worksite,payment of royality,taxes etc. all complete as per specification and direction of E.I.C. |
| 114 | Supplying all materials labour T&P and providing RCC(1:1.5:3)using 12mm hg chips for RCC works including hoisting,laying,watering,curing,conveyance of all materials to work site,payment of royality, taxes etc. all complete as per specification and direction of E.I.C. |
| 115 | Supplying all materials labour T&P and fixing of RCC baffle wall precast with cc(1:1.5:3)using 12mm bhg chips and fitted to septic tank as per P.H. specification and direction E.I.C. |
| 116 | Supplying all materials labour T&P and Providing cement flush pointing(1:3) to brick masonary including watering,curing,conveyance of all materials to work site etc. all complete as per specification and direction of E.I.C. |
| 117 | Supplying all materials,labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C. |
| 118 | Supplying all materials,labour,T&P and constructing inspection chamber of the following sizes with cc(1:3:6)using 40mm size hg metal on bed,1st class KB Brickwork in cm(1:6)moulding and shaping the channel inside and benching with cc(1:1.5:3)using 12mm size hg chips,12mm thick CP(1:3)with punning to inside,cement flushpointing(1:3)to outside,RCC cover slab in cc(1:1.5:3)using 12mm size h.g. chips with RCC man hole cover,e.w. in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,conveyance of all materials to site,payment of royality,taxes etc. all complete as per approved specification and direction of E.I.C.(a)Inside size760mm x760mm x 460mm |
| 119 | Construction of Gully Trap Chamber (0.25 x 0.25 inside Size) |
| 120 | Bore Protection Chamber |
| 121 | Supplying all materials, labour, T&P and laying in trenches PVC SWR soil waste ventilating pipes for sewer line of following dia in trenches (to slope or level)and jointing with supply of approved solvent cement by non-heat application method C.C (1:3:6) using 40mm size hard granite metal on bed of the trenches and all round concrete encashing with C:C (1:4:8) using 40 mm size H.G. metal, earthwork in excavation in trenches in all kinds of soil, refilling the same in a layer of 0.30mtr with watering, ramming and removing of surplus earth, testing the S.W. pipeline etc. all complete as per approved drawing, specification and direction of the E.I.C.110 mm dia PVC pipe line (Haunch top) |
| 122 | 160 mm dia PVC pipe line (Allround ) |
| 123 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravel backing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.Soak way Pit 1.4m dia x 2.00m Deep (Inside Size) |
| 124 | Soak way Pit 1.0m dia x 2.00m Deep (Inside Size) |
| 125 | Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx3.18m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(a)2000 lits capacity on the roof of Ground floor |
| 126 | Supplying all material,labour,T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to IS:15701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts,including hoisting upto a height of 5mtr above GL & placing the tank in required position including conveyance of all materials to worksite,payment of royalty,taxes etc all complete as per PH specification and direction of the E.I.C.(a)2000 lits capacity on the roof of Ground floor |
| 127 | Supplying all materials,labour,T&P and providing&fixing to wall or ceiling and floor pvc pipes confirming to ASTM-D-1785/89(sch-80)and pipe fittings of the nominal bore with clamps including making good the wall,ceiling and floor all complete as per specification and direction of E.I.C.25mm outer dia C-PVC Pipe |
| 128 | 20mm outer dia C-PVC Pipe |
| 129 | 32mm dia U-PVC Pipe |
| 130 | Supplying all materials,labour,T&P and cutting holes for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.In Ground Floor and First Floor |
| 131 | Supplying all materials,labour,T&P and cutting holes in RCC,floors,roof,etc.upto 19cm thick for passing GI/PVC pipes and fitting etc. and repairing the holes after insertion of pipes etc. with cc(1:2:4)including finishing complete so as to make it leak proof as per direction of E.I.C.In Ground Floor and First Floor |
| 132 | Supplying all materials,labour,T&P and cutting grooves in pucca floor and walls for taking G.I/PVC pipes and making good the damages as per the direction of E.I.C.In Ground Floor and First Floor |
| 133 | Supplying all materials,labour,T&P and fixing brass CP fittings of thefollowing nominal bore with supply of all jointing materials complete as per specification and direction of EIC Jaquar makeab 15mm dia CP LB Bib cock |
| 134 | 15mm dia CP Two way Bib cock |
| 135 | 15mm dia CP Angle stop cock |
| 136 | 15mm dia CP Pillar Cock with Swan Neck |
| 137 | 15mm dia CP concealed stop cock |
| 138 | 15mm dia Health Faucet & 1.0m long Flexible pipe |
| 139 | 25mm dia PVC F.W.V. |
| 140 | 32mm dia PVC F.W.V. |
| 141 | 15mm dia CP Flange |
| 142 | 15mm dia CP revolving shower |
| 143 | 1.00HP Single Phase Submersible Pump Set-Supplying all materials,labour,T&P and fitting and fixing of ISI mark 1.0HP single phase vertical water cool submersible pump set with discharge 1800/2200Lit/Hour & a head-55/70mtr.of reputed make(CRI/ KSB/Texmoor Equivelent) Including cost conveyance and taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 144 | Supplying all materials,labour,T&P and fitting&fixing of 1.0HP single phase vertical submersible pump set with commissioning and testing etc. all completes as per P.H. Specification and direction of E.I.C. |
| 145 | Supplying all materials,labour,T&P and fitting & fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.0HP single phase vertical submersible pump set including all cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 146 | Supplying all materials,labour,T&P and fitting & fixing of (2.5mm)2 3core copper flat suitable cable having ISI mark of reputed company like BCH/Finolex or equivalent & connecting the pump starter including cost conveyance & taxes etc. all completes as per P.H. Specification and direction of E.I.C. |
| 147 | Supplying fitting and fixing of steel rope MS well cover,MS clamp,stainless steel short piece,bend & socket including all cost,taxes etc all complete as perdirection of the E.I.C. |
| 148 | Supplying fitting and fixing of HDPE Pipes & pipe fittings with making connection to pump set including all cost conveyance and taxes etc all complete as per direction of the E.I.C. |
| 149 | Supplying all materials, labour, T&P and providing fitting and fixing Aquaguard PRO Thermapure 120 PSS RO ACH which gives you Hot,Cold & Ambient purified water.Aquaguard PEO Thermapure 120 PSS RO has built-in-3 stage combinations,Tank Capacity 120Ltr.,Cold Water-80 Ltrs,Hot water-20 Ltrs.,Ambient water-2- Ltrs.,Cooling capacity-60 LPH,Refrigerant-HFC R134a,Cold water temperature-15 Deg.C+/-1*,Heating coil wattage-2000W,Hot water temperature-50 Deg C+/-1,Thermal insulation-PUF,No of Faucets-1 Hot,1 Cold,1 Ambient,Tank,front panel and drain tray MOC-SS304,Other body panels-Powder coated CRCA Steel,No of filtration stages-7,RO Capacity-50 LPH*,RORecovery%-50%*,TDS Reject-90%*,Dimentions(WxDxH)cm-75x72x144,Net weight-92 Kg.etc.all complete as per direction of the Engineer-in-charge. |
| 150 | Supplying all materials, labour, T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp etc all complete as per specification and direction of the Engineer in charge.porcelain Halfstall Magnum Urinal(Parryware/Hindware/Neycer) |
| 151 | 15mm dia Urinal spreder |
| 152 | 32mm dia cp wate |
| 153 | Sinking of 200mmx150mm Size Bore Well Through DTH Method:-(2 Nos.)-Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation(G.I/P.V.C/M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only.Drilling of 200mm. dia. Bore-0.00mtr to 50mtr and above |
| 154 | Drilling 150mm dia. Bore-50mtr to 100.00mtr and above |
| 155 | Labour for lowering the following size of PVC casing pipes with or without slotted pipes as per necessity from ground level upto 300 mtrs depth and fitted and set up in perfectly vertical position including cutting and threading of blank pipes and slotted pipes and supplyinging and fixing of all jointing materials ,extra sockets and T&P etc. all complete and keeping the top of casing pipe threaded including plugging the tubewell to prevent entry of foreign materials.Lowring of 200mm dia pipes-0.00mtr to 50.00mtr |
| 156 | Cost of 200mm dia PVC casing pipes-0.00m to 50.60m |
| 157 | Cleaning&developing the tube well using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per the direction of E.I.C. |
| 158 | Supplying all materials , labour , T&P and providing , fitting and fixing of I. M. - II hand pump complete with accessories and along with 8nos of riser pipes of 32mm dia nominal bore hot dip galvanised screwed and socked, fitted with socked made of seamless or machine from solid bar socked fitted at one end and thread protector at the other end with 8nos of 12mm dia connecting rod made of bright bar electrogalvanised fitted with coupler and fitted with stand assembly suitable for use in bore well etc all complete as per direction of EIC. |
| 159 | Supplying all materials, labour, T&P and construction of circular Tube well platform(1.80m dia) with c.c. (1:3:6) using 40mm size h.g. metal on bed and providing c.c. (1:2:4) using 12mm size around the casing pipe with circular parapet of platform with foot rest with earth work excavation in all kinds of soil as per UNICEF drawing and design etc all complete as per specification and direction of EIC. |
| 160 | Supplying all materials, labour, T&P and construction of drain as per UNICEF etc all complete as per specification and direction of EIC. |
| 161 | Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp,one way modular switch ISI marked and ceiling rose ISI marked mounted on Modular G.I. box having front bakelite cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire = Finollex / L & T/ Anchor/ Havels/ V-Guard/ Greatwhite / Polycab) Group A (1.1.1) |
| 162 | -do- .... Group B (1.1.2) |
| 163 | -do- .... Group C (1.1.3) |
| 164 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.2 Modular box with base & cover (1.24.2) |
| 165 | 4 Modular box with base & cover (1.24.3) |
| 166 | 8 Modular box with base & cover (1.24.5) |
| 167 | 12 Modular box with base & cover (1.24.6) |
| 168 | S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board (1.25.1+1.25.4) |
| 169 | S/F of 6 Modular GI box in recess with suitable size of Modular base cover in front including providing and fixing 2 nos 3 pin 5/6 amp. Modular Socket out let & 5/6amp. Modular type switch,connection,painting etc. as required.(2X1.25.1+2X1.25.4)+6 MODULE |
| 170 | S F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15 16 amp. piano type Modular switch & Socket connection, painting etc as required 1.25.3+1.25.5 +4 MODULE BOX |
| 171 | S/F of computer board (Modular Type) consisting of 3 nos. of 5 amp plug and switch and 6 amp MCB, Indicator complete with wiring on 12 module M.S.box with B.k.cover(1.24.6 + 3 x (1.25.1+ 1.25.4) + 2.6.1) |
| 172 | Wiring for circuit I sub main wiring alongwith earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS- 694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required ( Make of wire- Finolex/ / Anchor/ Havels/ V-guard / HPL / L&T / Gratewhite / Polycab). -do- 2x1.5sqmm +1x1.5sqmm ( 1.8.1 ) |
| 173 | -do-2x2.5sqmm +1x1.5sqmm ( 1.8.2 ) |
| 174 | -do- 2x4sqmm +1x1.5sqmm ( 1.8.3 ) |
| 175 | -do- 2x6sqmm +1x2.5sqmm 1 8 4 |
| 176 | -do- 4x6sqmm +2x2.5sqmm ( 1.8.10 ) |
| 177 | S/Fof 'B' series SP MCB of 5A to 32 Amp rating 240Volt \\"B\\" series MCB for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP)(2.6.1) |
| 178 | S/F of 63A 4pole MCB type C (make: L&T / equivalent) |
| 179 | S/F of 63A DP MCB |
| 180 | S/F of following 8way single pole and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.2 |
| 181 | S/F of following 16way Double Door and neutral sheet steel MCB DISTRIBUTION BOARD 250v on surface /recess complete with tinned copper bus bar, neutral bar, earth bar, din bar ,detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (except MCB) 2.3.8 |
| 182 | S/F of Call bell/ Buzzer ISI marked sutiable for DC/AC single Phase 230 volts complete as required.(1.30) |
| 183 | S/F of batten holder BK angle holder ISI marked including connection etc instead of ceiling rose (Make: Cona / Anchor / Havells / Greatwhite / Preeti / HPL) (1.29-1.28) |
| 184 | Earthing with copper earth plate 600 mm x 600mm x 3.15 mm thick and 25mm x 5mm copper tape 1.15Kg. Per Mtr 3.5Mtr & 20mm G.I.pipe medium class 2.7 Mtr. ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc wih charcoal and salt as required. 3.5 + 3.6 |
| 185 | Providing and fixing 8 SWG copper wire in recess for loop earthing as required. (3.18) |
| 186 | S/F of 1200mm A.C. Ceiling fan (1Star) with all accessories and connections with out fan regulator (Make:Usha-Striker One/Neo/Crompton- highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White-ALDOUS/Pollycab-Vital HS) |
| 187 | S/F of electric step ceiling fan regulater in existing switch box including connection with 1.5sqmm FR PVC insulated single core multistrand copper conductor earthing the regulator as required.(1.38) |
| 188 | S/F of Fan hok S'type made of 16mm MS rod as per specificationn |
| 189 | S/F of 60 wt. LED St. Light fitting with LED Electronic driver with all accessories & connection( Make- Crompton/Phillips/HPL/Polycab/Havells ) |
| 190 | S/F of Oval shaped portico lamp(Make: Bajaj/Philips/crompton/Hvels) |
| 191 | S/F of 18-25 watt LED Tube light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL) |
| 192 | S/F of 18W Recess Mount(Round/Square) Type Ceiling light (Havels/crompton/philips/panasonic) |
| 193 | Supply of instalation, Testing commissioning of 13 Watt. LED bulb |
| 194 | S/F of 15A socket for A.C. on 2 module |
| 195 | S/F of 32A C series D.P. MCB for A.C (make: Legrand/Anchor/Havels/HPL) |
| 196 | S/F of A.C.Starter 20Amp with 2 module Box.(Make Havells/Equivalent) |
| 197 | S/F of 1.5T 5Star split type AC Machine, Make-O general/daikin/LG |
| 198 | S/F of Voltage Stabilizer(130-300V) Upto 1.5 Ton AC, Make-Microtech/V-Guard |
| 199 | S/F OF 2000VA/24v Invertor with 2no 180Ah Battery including Trally arrangement. (Luminous/Microtek/Excide) |
| 200 | S/F of 300 exhaust fan with all accessories and connections(Make-Usha-Aero Clean plus DBB/Polycab-Fress on DBB/Cromton-Trans Air12\\" reversible/Havells-Ventil Air DS(HS)/Ancor-Anmol DelusR/Orient-Power Flow DBB |
| 201 | Invertor wiring (1x 1.5 sqmm) copper wire (1.19.1) |
| 202 | Provn. of 3 1/2 x 50 sqmm Armoured Cable with all connections(26) |
| 203 | Laying of MV cable above 25sqmm to 120 sqmm in ground (5.1.2) |
| 204 | Laying of MV cable above 25sqmm to 120 sqmm on surface(5.5.2) |
| 205 | S/M of end termination of LV/MV cable size 3 1/2 x50 sqmm (5.8.22) |
| 206 | 125 A Panel Board(30''x28''x10'') 1. 125A 4P MCCB (36KA) (Make :L&T)-01 2. 125A Spreader Link-01 3.125A Copper Busbar with all Accessories-01 4.63A 4P MCB-03 5.63A DP MCB-02 6.Digital metering with CT & RYB indicator and danger board-01 7.Internal wiring with copper lugs, wire & other accessories-01 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 01, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysSep 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender