Tender For Construction Of Primary Health Centre Level - Ii Building At Karsai Tehsil Nadaun District Hamirpur (Hp) (Sh:- Construction of Building Portion I/C Water Supply And Sanitary Installation, Septic Tank, Rain Water Harvesting Tank, & Site Dev
Tender Value
1.30 Crore
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
2.60 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Primary Health Centre Level - Ii Building At Karsai Tehsil Nadaun District Hamirpur (Hp) (Sh:- Construction of Building Portion I/C Water Supply And Sanitary Installation, Septic Tank, Rain Water Harvesting Tank, & Site Development Etc.) Estimated Cost:-Rs. 13041639.00 Earnest Money:- Rs. 260900.00 Time Limit:- Nine Months
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains for all kinds of soil and ordinary rocks including dressing of sides and ramming of bottoms upto all lifts including getting out the excavated soil and disposal and transportation of surplus excavated soil / unuseful material for disposing at dumping site( to be arranged by the contractor) within all leads and lifts including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 2 | Earth work in excavation for all type of road structure such as retaining walls ,breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil . ordinary rock, hard rock, chiseling/ wedging out of rock (where blasting is prohibited ) as per drawings and M.O.R.D technical specification clause 305-1 and as per direction of the Engineer-in- Charge including setting out, construction of shoring and bracing removal of stumps and other deleterious materials and disposal of materials upto any leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm(one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water ( surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of the Engineer-in- Charge including carriage of materials within all leads and lifts and other incidentals . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 3 | Filling with available excavted earth (exculding rock) in trenches, plinth, sides of foundation etctra in layer not exceding 20 cm (twenty centimeter) in depth consolidating each deposited layer by the ramming and watering complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 4 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 5 | Providing and laying in position Cement concrete grade 1:3:6 (one cement : Three coarse sand : Six graded stone aggregate) 40mm ( forty millimetre) nominal size. of specified grade excluding the cost of centering and shuttering upto plinth level complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 6 | Providing and laying in position cement concrete of specified grade 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level excluding the cost of centering and shuttering including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 7 | Providing and laying in position Cement concrete grade 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm ( twenty millimetre) nominal size of specified grade excluding the cost of centering and shuttering upto plinth level complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. TThe rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 8 | Providing and laying in position cement concrete of specified grade 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre) nominal size. excluding the cost of centering and shuttering all work upto plinth level complete including entire carriage of materials with in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 9 | Providing and laying damp-proof course 40mm (Forty millimetre) thick with cement concrete 1:2:4 (One cement : Two coarse sand) : Four graded stone aggregate 20mm (twenty millimetre) nominal size complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 10 | Providing and applying a coat of residual petroleum bitumen of grade of VG-10(ten) of approved quality using 1.7 kg ( one point seven kilogram ) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 11 | Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm ( twenty millimetre) nominal size) over 75mm( seventy five millimetre) thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 12 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (Thirty) design mix to obtain the minimum compressive strength of 30N/mm square (Thirty newton per square millimetre) with cement contents not less than @ 400 Kilogram/Cubic metres (at the rate Four hundred kilogram Per Cubic metre) or as per approved design mix for all works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 (Indian Standard : Ninty one hundred three) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 13 | Providing and laying in position machine batched and machine mixed design mix M-30 (Thirty) design mix to obtain the minimum compressive strength of 30N/mm square (Thirty newton per square millimetre) with cement contents not less than @ 400 Kilogram/Cubic metres (at the rate Four hundred kilogram Per Cubic metre) grade cement concrete for reinforced cement concrete work, cement content as per approved design mix, including pumping of concreteusing to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 (Indian Standard : Ninty one hundred three) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge. All works above plinth level upto all floors level including entire carriage of material within all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form work Foundations, footings, bases for columns complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 15 | Centering and shuttering including strutting, propping etcetera and removal of form work Suspended floors, roofs, landings, balconies and access plat form complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 16 | Centering and shuttering including strutting, propping etc. and removal of form work Shelves (in cast situ) complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 17 | Centering and shuttering including strutting, propping etcetera and removal of form work Lintels, beams, plinth beams, girders, bressumers and cantilevers complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 18 | Centering and shuttering including strutting, propping etcetera and removal of form work Columns, piers, abutments, pillars, posts and struts complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 19 | Centering and shuttering including strutting, propping etcetera and removal of form work Stairs, (excluding landings) except spiral staircases complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form work Small lintels not exceeding 1.5m (one point five meter) clear Span , mouldings , window cills etcetera. complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form work Edges of slab and break in floors and walls under 20cm (twenty centimeter) wide complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 22 | Centering and shuttering including strutting, propping etc. pilasters, butteresses, plinth and string courses etcetera and removal of form work Walls (any thickness) including attached complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 23 | Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 24 | Steel reinforcement (TATA /SAIL steel make) for R.C.C. work including straightening, cutting, placing in position and binding all complete work including cost of binding wire upto all floor level Thermo-Mechanically Treated bars of grade Fe-500D ( Five hundred D) or more steel bars including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 25 | Providing and construction of brick work using Second class common burnt clay building bricks in sub or super-structure upto all floor level in cement mortar 1:6 (One cement isto Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 26 | Providing and laying brick masonry using second class common burnt clay building bricks in rat trap bound masonry (on three inch edge) in cement mortar 1:4 (One cement isto four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 27 | Providing and construction of second class half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in superstructure above plinth up to all floor level in cement mortar 1:4 (One cement : four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 28 | Providing and fixing 20 mm (twenty millimetre) diameter stainless steel curtain rods of wall thickness 1.25 mm (one point two five millimetre) with two brass brackets fixed with brass screws and wooden plugs etcetra wherever necessary complete, including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 29 | Providing and fixing 19mm (fifteen millimetre) thick Commercial board waterproof termite resistant proof shutters for cup boards and finishing the edges with 19x6mm (fifteen millimetre into six millimetre) hardwood beading including fixing with SS piano hinges with screws etcetera complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 30 | Providing and fixing 19mm (Nineteen millimetre) thick water proof termite resistant commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etcetera complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 31 | Providing and fixing 12mm (twelve millimetre) thick water proof kit ply of standard quality ISI mark and approved shade and colour in wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) . including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 32 | Providing and fixing 1.00mm (one millimetre) thick colored and decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 33 | Providing and fixing M.S. (mild Steel) grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all completeFixed to steel windows by welding including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 34 | Providing and fixing 40x5 mm(forty into five millimeter) flat iron hold fast 40 cm(forty centimeter) long including fixing to frame with 10 mm (ten millimeter) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm(thirty into ten into fifteen centimeter) 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mm(twenty millimeter) nominal size).complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 35 | Providing and fixing 250 mm (two hundred fifty millimetre) weighing not less than 150 gms(one hundred fifty gramms) oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete. including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 36 | Providing and fixing 50 mm (Fifty millimeter) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etcetera complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 37 | Providing and fixing 50 mm (Fifty millimeter) bright finished brass cup board or wardrobe knob of approved quality with necessary screws. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 38 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, (Indian standard Three thousand five hundred sixty four) embossed on the body, door weight upto 36 kg to 80 kg (thirty six kilogram to eighty kilogram) and door width from 701 mm to 1000 mm (Seven hundred one millimeter to one thousand millimeter)), with double speed adjustment with necessary accessories and screws etcetera. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 39 | Providing and fixing aluminium sliding door bolt 300x16mm (three hundred into sixteen millimeter) anodized transparent or dyed to required shade and colour with bolts and nuts screws etcetera complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 40 | Providing and fixing aluminium sliding door bolt 250x16mm (two hundred fifty into sixteen millimeter) anodized transparent or dyed to required shade and colour with bolts and nuts screws etc.complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 41 | Providing and fixing aluminium tower bolts 250x10mm (two hundred fifty into ten millimeter) (Berrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 42 | Providing and fixing aluminium tower bolts 150x10mm (one hundred fifty into ten millimeter) (Berrel type) anodized transparent or dyed to required shade and colour with screws etcetera complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 43 | Providing and fixing aluminium handles 125mm (one hundred twenty five millimeter) anodized transparent or dyed to required colour or shade with necessary screws etcetera complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 44 | Providing and fixing aluminium handles 100mm (one hundred millimeter) anodized transparent or dyed to required colour or shade with necessary screws etcetera complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 45 | Providing and fixing aluminium handles 75mm (one hundred millimeter) anodized transparent or dyed to required colour or shade with necessary screws etcetera complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 46 | Providing and fixing aluminium hanging floor door stopper,ISI(Indian standard) marked,anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 (Indian Standard one thousand eight hundred sixty eight)) transparent or dyed to required colour and shade, with necessary screws etc. complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 47 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etcetera complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 48 | Providing and fixing double rebates MS Channel iron doors window clerestry window framing manufaturing framme MS section 75x40mm (seventy five into fourty millimetre) and MS FLAT 40x12mm (fourty into twelve millimetre) as per directionof Engineer-in-Charge and approved drawing including hinges lock jambs beed and if require angle thrash hold of mold steel angle 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanically means lugs with split and tails to each jambs including steel butt hings 2.5mm (two point five millimetre) thick with provision for locking observer as specified and applying a coat of approval steel primer after pre-treatment of the surface including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 49 | Providing and fixing double rebates MS Channel iron doors window clerestry window framing manufaturing framme MS section 75x40mm (seventy five into fourty millimetre) and MS FLAT 75x 5mm (seventy five into five millimetre) as per directionof Engineer-in-Charge and approved drawing including hinges lock jambs beed and if require angle thrash hold of mold steel angle 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by mechanically means lugs with split and tails to each jambs including steel butt hings 2.5mm (two point five millimetre) thick with provision for locking observer as specified and applying a coat of approval steel primer after pre-treatment of the surface including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 50 | Providing and fixing ISI (Indian Standard Institute) marked flush door shutters conforming to IS : 2202 (Indian standard : two thousand two hundred two) (Part I( one) decorative type, core of block board construction with frame of 1st (First) class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm (Thirty five millimeter) thick including ISI (Indian standard institute) marked Stainless Steel butt hinges with necessary screwscomplete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 51 | Providing and fixing PVC rigid foam sheet 1 mm (one millimetre) thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 52 | Providing and fixing steel glazed shuttering of Z-section with 5.0mm( five point zero millimetre) thick MODI glass for door window and clearstory with fitting metal beading of approved quality shape and section with fitting and necessary scscessary serews and approved coat of priming paint , with red lead paint complete as per approved drawing and specification side hung window including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 53 | Providing and fixing wire gauge shutters for steel doors, windows (Shutters of standard Z-section) and other accessories ready made standard steel windows /ventilators with necessary fittings using galvanised M.S guage of IS guage designation 85G(Eighty Five G) with wire of dia 0.56mm (Zero point Five six millimetre) for doors and window side hund windows as per the direction of Engineer-in-Charg. including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 54 | Structural steel work (TATA,SAIL or RASHTRIYA ISPAT) in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 55 | Providing laying steel work of (TATA,SAIL or RASHTRIYA ISPAT) welded in built up section/ hollow section trusses and framed work, including cutting,hoisting and fixing in position including applying a priming coat of red lead paint in beams joists channels, angles, tee,flats with connecting plates or angle cleats as in main and cross beams, hip and rafters,purlins connected to common rafters and the like complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 56 | Providing and fixing M.S. (mild steel) fan clamp type I (one) or II (two) of 16 mm (Sixteen millimeter) dia M.S. (mild steel) bar, bent to shape with hooked ends in R.C.C. (Reinforcement Cement concrete) slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 57 | Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ) framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 58 | Providing and fixing MS railing for stair case having balluster of 19x19mm (Nineteen into Nineteen millimeter) square bar with a clear height of 85cm (eighty five centimeter) embedded in cement concrete steps and jointed with a electrical/gas welding at top along with MS (Mild Steel) flat of 40mmx6mm (forty into six millimeter) size complete with a applyiong priming coat of red lead paint as per drawing and specification and as per direction of Engineer-in-charge.complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 59 | Providing and fixing 18 mm (Eighteen millimeter) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (Twenty millimeter) thick base cement mortar 1:4 (one cement : four coarse sand), jointstreated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. Granite of any colour and shade complete at all levels. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 60 | Providing edge moulding, nosing to 18mm (Eighteen millimeter) thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 61 | Precast terrazo tiles 22 mm (twenty two millimetre) thick with graded marble chips of size upto 12 mm,(twelve millimetre) laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm(twenty millimetre) thick bed of cement mortar 1:4 ( one cement: four coarse sand) complete light shade pigment using white cement including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 62 | Precast terrazo tiles 22 mm (twenty two millimetre) thick with graded marble chips of size upto 12 mm,(twelve millimetre) in skirting and risers of steps not exceeding 30 cm (thirty centimere) in height on 12 mm (twelve millimetre) thick cement plaster 1:3 ( one cement: three coarse sand) jointed with neat cement slurry mixed with pigment to match the sade of the tiles including rubbing and polishing complete with tiles of light shade pigment using white cement including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 63 | Kota stone slab flooring 55 x55cm (fifty five into fifty five centimetre) polished with marble band 7.5 cm (seven point five centimetre) wide as per flooring pattern over 20 mm (twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : for coarse sand) : 25mm (twenty five millimetre) thick Upto all floors level including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 64 | Kota stone slabs 20 mm (twenty millimetre )thick in risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement: Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 65 | 40 mm(forty millimetre) thick fine dressed stone flooring over 20 mm (twenty millimetre) (average) thick base of cement mortar 1:5 (one cement : five coarse sand), including pointing with cement mortar 1:2 (one cement : two stone dust) with an admixture of pigment to match the shade of stone Red sand stone including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 66 | Providing and fixing ceramic glazed floor tiles of size 300x300mm ( three hundred into three hundred millimetre) made of AGL/BELL-ORIENT Kajaria/ Nitco first class quality conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except as White, lvory, Grey, Fume Red , Brown laid on 20mm (twenty millimetre) thick cement Mortar 1:4 (one cement: four coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three point three kilogram per square metre) including pointing the joint with white cement and matching pigment etc. complete including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 67 | Providing and fixing 1st quality ceramic glazed floor tiles made of AGL/BELL-ORIENT Kajaria/ Nitco first class quality conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm(twelve millimetre) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 68 | Providing and laying vitrified floor tiles made of AGL/BELL-ORIENT/Kajaria/ Nitco first class quality 600x600mm ( six hundred into six hundred millimetre) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm(twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(three point three kilogram / square metre) including grouting the joints with white cement and matching pigments etc., including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 69 | Providing and laying vitrified floor tiles made of AGL/BELL-ORIENT Kajaria/ Nitco first class quality 600x600mm ( six hundred into six hundred millimetre) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, in skirting, riser of steps, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (one cement : three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(three point three kilogram / square metre) including grouting the joints with white cement and matching pigments etc., including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 70 | Providing and laying kajaria/ Nitco make white glazed tiles 6 mm (six millimeter) thick size 30x45cm (thirty into fourty centimetre) in skirting risers of steps and dado 12 mm(twelve millimeter ) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 71 | Providing and fixing plain multipurpose cement board(High pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).6 mm (six millimetre) thick Cement fiber board as per IS: 14862 including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 72 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion, (i) Single socketed pipes.110mm (one hundred ten millimetre) dia of D-plast or vectutus make including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 73 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion, (i) Single socketed pipes. 75mm (seventy five millimetre) dia of D-plast or vectutus make including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 74 | Providing and fixing 110 mm (one hundred ten millimetre) dia couper on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Superme/ Finolex/ Kitch make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 75 | Providing and fixing 110 mm (one hundred ten millimetre) dia single pushfit couper on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Superme/ Finolex/ Kitch make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 76 | Providing and fixing 110 mm (one hundred ten millimetre) plain bend on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Superme/ Finolex/ Kitch make conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 77 | Providing and fixing 0.60mm (Zero point sixty millimeter) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNV) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyester of 5 (five) microns over 5 (five) microns priming coating including fixing with preprinted iron J or L hooks, volts and nuts 6mm (six millimeter) diameter with preprinted limpet and rubber washers complete with all accessories as required as per direction of Engineer in charge. including entire carriage of material in all leads and lifts. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 78 | Providing and fixing ridges or hips 60 cm (sixty centimetre) overall with 0.60mm (zero point sixty millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5(five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm (six millimetre) dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Chargesincluding entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 79 | Providing and fixing flushing 38 cm (thirty eight centimetre) overall with 0.60mm (zero point sixty millimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating + back coat of polyster of 5 (five) microns over 5(five) microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm (six millimetre) dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Chargesincluding entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 80 | Providing and fixing 15cm( fifteen centimeter ) wide 45cm ( forty five centimeter) overall semicircular plain G.I sheet gutter with iron brackets 40x3mm( forty into three millimeter) size bolts and nuts and washers etc. including making necessary connections with rain water pipe complete as per design 0.63mm (Zero point six three millimetres) thick sheet as per the direction of Engineer in Chargesincluding entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 81 | Providing and fixing mild steel BP sheet 1.66mm (one point sixty six millimetre) to 2mm(two millimetre) thick in eaves board /facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (base members of steel work shall be measured and paid separtely including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 82 | Providing and laying 15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 (one cement : Six course sand) upto all floors levels including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 83 | Providing and laying 6 mm (six millimetre) cement plaster of mix 1:3 (one cement : thre fine sand) including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 84 | Extra for plastering done on moulding, cornices or architraves including neat finish to line and level in one coat including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 85 | Forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge 15 mm(fifteen millimetre ) wide and 15 mm (fifteen millimetre ) deep groove including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 86 | Finishing walls with water proofing cement paint Emulsion of apex asian paint/ nerolac of required shade New work (Two or more coats applied @ 3.84 kg/10 sqm (three point eighty four kilogramme/ square metre) including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 87 | Distempering with 1st quality Acylic distemper of Assian paint / Nerolac (ready mixed of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification. New work (two or more coats) including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 88 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 89 | Providing and applying white cement based putty of average thickness 1 mm, (one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 90 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications for Painting wood work with Deluxe Multi Surface Paint to give an even shade two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine zero liter / ten square metre) over an under coat of primer applied @ 0.75 ltr/ 10 sqm(Zero point seventy five liter per ten square metre) of approved brand and manufacture including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 91 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications for Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (zero point nine zero liter / ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm(Zero point eighty liter per ten square metre) of approved brand and manufacture including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 92 | Providing and laying 250 mm (two hundred fifty millimetre) diameter S.W. pipe in cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (fourty millimetre) nominal size all-round S.W. pipes including bed concrete as per standard design including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 93 | Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:a)Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying: b)laying second layer of Fibre glass cloth when the first layer is still green.Overlaps of joints of fibre cloth should not be less than 10 cm (ten centimeter). c) third layer of 1.5 mm (one point five milimeter) thickness consisting of slurry of cement @ 1.289 kg/sqm (one poine two hundred eighty nine kilogram per square meter) mixed with water proofing cement compound @ 0.670 kg/sqm (Zero point six hundred seventy kilogram per square meter) and coarse sand @ 1.289 kg/sqm (one poine two hundred eight nine kilogram per square meter). This will be allowed to air cure for 4 (Four) hours followed by water curing for 48 Forty eight) hours. The entire treatment will be taken upto 30 cm (thirty centimeter) on parapet wall and tucked into groove in parapet all around. d) fourth and final layer of brick tiling with cement mortar (which will be paidfor separately. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 94 | Providing and laying Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm(twenty millimeter) nominal size) upto plinth level with :Cement mortar 1:6 (one cement : six coarse sand) complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 95 | Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimeter) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. (cast iron) surface box 100x100 x75 mm (one hundred into one hundred into seventy five millimeter) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand :four graded stone aggregate 20 mm (twenty millimeter) nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm (forty milllimeter) nominal size ) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twenty millimeter) thick, finished With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five) complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 96 | Constructing soak pit 1.20x1.20x1.20 m(one point twenty into one point twenty into one point twenty meter) filled with brickbats including S.W. (Stone Ware) drain pipe 100 mm (One Hundred millimeter) diam complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 97 | Providing and fixing 75mm(Seventy five millimeter) PVC (Polyvinyl chloride) Cowl complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 98 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L.D 2.5 circular shape 450 mm(four hundred fifty millimetre) internal diameter including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 99 | Providing and fixing 110mm(one hundred ten millimeter) PVC (Polyvinyl chloride) Cowl complete upto floor all level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 100 | Distempering with 1st (First) quality acrylic Washable distemper (ready mixed) (Asian / Dulux /Berger paints) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 101 | Back filling behind return wall,abutment wall, Retaining wall stone boulders of size range 5 cm to 20 cm (Five centimetre to twenty centimetre),in the required thickness, for all leads and lifts, complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 102 | Providing weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 110 mm (one hundred ten millimetre) diametre PVC pipe extending through the full width of the structures with slop of 1 (v):20(H) (One Vertical : twenty Horizontal) towards drawing face complete as per drawing and technical specification complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 103 | Providing and laying factory made 80mm (Eighty millimetre) thick cement concrete paver block of M-30 (M-thirty) grade with approved colour, design and pattern (NTC make ISI marked) chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etcetra of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick (fifty millimetre) compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 104 | WS & SI |
| 105 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, ( one point five metre) including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm ( twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within all leads Pipes, cables etcetera exceeding 80 mm ( eighty millimetre) dia. But not exceeding 300 mm ( three hundred millimetre) dia complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 106 | Providing and fixing water closet squatting pan CAT No 20004 of Hindware or its equlvalent ( Indian type W.C pan) with 100mm(one hundred millimetre) sand cast iron Por S trap P.V.C flushing cistern SLEEKFRESS DUAL. FLUSH, , including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern size 580x440mm ( five hundred eighty into four hundred fourty millimetre) of Hindware or Cera intergal type foot rest including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 107 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 (ten) litre low level flushing cistern with fitting and brackets, 40 mm (fourty millimetre) flush bend, 20 mm (twenty millimetre) over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required white vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 108 | Providing and fixing White Vitreous China Wash basin with C.I brackets size 550x400 mm ( five hundred fifty into four hundred millimetre) with a pair of 15 mm (fifteen millimtre) C.P. brass pillar taps of Jaguar Hindware, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require as per direction of Engineer-in-Charge. .including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 109 | Providing and fixing white vitreus china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of Jaguar Hindware / Cera make as approved by Engineer-in-Charge including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 110 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm(five hundred ten into one thousand forty millimetre) bowl depth 250 mm (two hundred fifty millimetre ) including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 111 | Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1 metre (one metre) long with S.S. triangular plate to Eureopean type W.C. of quality and make Jaguar / Cera/ Hindware as approved by Engineer - in - charge. including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 112 | Providing and fixing 32mm (thirty two millimetre) dia P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete and Cera, Hindware make as approved by Engineer-in-Charge including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 113 | Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 114 | Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm(forty millimetre) long screws, rawl plugs etc., Hindware/ Cera/ Jaguar make complete including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 115 | Providing and fixing C.P brass toilet paper holder including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 116 | Providing and fixing 110mm ( one hundred ten millimetre ) dia nominal size high pressure made of Paryware , Hindware , Cera/finolex of following dia PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 117 | Providing and fixing 75mm ( seventy five millimetre ) dia nominal size high pressure made of Paryware , Hindware , Cera/finolex of following dia PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 118 | Providing and fixing 110mm ( one hundred ten millimetre ) dia PVC clamps ISI marked including fixing with approved design with steel screws and orwer plug etc. complete including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 119 | Providing and fixing 75mm ( seventy five millimetre ) dia PVC clamps ISI marked including fixing with approved design with steel screws and orwer plug etc. complete including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 120 | Providing and fixing PVC single equal plain branch with oval access door ISI marked , insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete 110mm (one hundred ten millimetre) dia including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 121 | Providing and fixing PVC single equal plain branch with oval access door ISI marked , insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete 75mm (seventy five millimetre) dia including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 122 | Providing and fixing PVC double equal branch with oval access door ISI marked , insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete 110mm (one hundred ten millimetre) dia including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 123 | Providing and fixing PVC double equal branch with oval access door ISI marked , insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete 75mm (seventy five millimetre) dia including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 124 | Providing and fixing 110mm ( one hundred ten millimetre ) nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 125 | Providing and fixing 75mm (seventy five millimetre) dia nominal size PVC door bend with oval access door, insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 126 | Providing and fixing PVC collar 110 mm (one hundred ten millimetre) dia ISI marked including fixing with approved adhesive etc. complete including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 127 | Providing and fixing PVC collar 75mm (seventy five millimetre) dia ISI marked including fixing with approved adhesive etc. complete including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 128 | Providing and fixing 15 mm (fifteen millimetre) nominal dia CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 129 | Providing and fixing 110x75mm ( one hundred ten into seventy five millimetre ) nominal size PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 130 | Providing and fixing CP towel rail (ESSCO-AEC-1111) complete with brackets fixed to wooden cleats with CP Brass screws with cocealed fittings arrangement of approved quality and colour 600mm (six hundred millimetre) long towel rail with total length of 645 mm (six hundred forty five millimetre) width 78mm(seventy eight millimetre) and effective height of 88mm(eighty eight millimetre) weighing not less than 190 gms (one hundred ninety grams) of Hindware/ Cera/ Jaguar make complete including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 131 | Providing and fixing 1216 (16 mm OD) (sixteen millimetre OD ) pipe Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C (eighty degree celsius) , including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in -Charge concealed work, including cutting chases and making good the wall etc. including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 132 | Providing and fixing 1620 (20 mm OD) (twenty millimetre OD ) pipe Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to with stand temperature up to 80°C (eighty degree celsius) , including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-Charge concealed work, including cutting chases and making good the wall etc. including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 133 | Providing and fixing G.I. Pipes complete with G.I. fittings including trenching and refilling etc. External work. 15 mm (fifteen millimetre) dia nominal bore including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 134 | Providing and fixing G.I. Pipes complete with G.I. fittings including trenching and refilling etc. External work. 20 mm (twenty millimetre) dia nominal bore including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 135 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm (twenty five to forty millimetre) nominal bore including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 136 | Fixing water metre and stop cock in G.I pipe line including cutting and threading the pipe and making long screws etc. complete (cost of wter meter and stop cock to be paid separately) including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 137 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20 mm(twenty millimetre) nominal bore Zindal/ Tata make including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 138 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25 mm(twenty five millimetre) nominal bore Zindal/ Tata make including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 139 | Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm (forty five centimetre) length 15 mm(fifteen millimetre) nominal bore Jal, Hindware or Finolex including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 140 | Providing and fixing 150 mm (one hundred fifty millimetre) diameter C.P. brass shower rose with 15 or 20 mm (fifteen or twenty millimetre) inlet nominal bore Zindal/ Tata make including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 141 | Constructing masonry Chamber 30x30x50 cm (thirty into thirty into fifty centimetre) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (one hundred into one hundred into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate) 40mm (fourty millimetre) nominal size ) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm (twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design with common burnt clay F.P.S.(non modular) bricks of class designation 7.5 (seven point five) including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 142 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15mm (fifteen millimetre) nominal bore including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 143 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 20mm (twenty millimetre) nominal bore including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 144 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Sintex make including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 145 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm(fifteen millimetre) nominal bore Jal, Hindware or Cera .including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 146 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.(six hundred ninety grams) 15 mm(fifteen millimetre) nominal bore Jal, Hindware or Cera including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 147 | Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. brass stop cock (concealed) of standard design and of approved JAL , ESS-ESS make conforming to IS:8931 including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 148 | Providing and fixing CP soap Dish Holder having length of 138mm,(one hundred thirty eight millimetre) breadth 102mm, (one hundred two millimetre) height of 75mm (seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms (one hundred six grams) Hindware/ Cera/ Jaguar make complete. .including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 149 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : One & Half coarse sand (zone- III) : three graded stone aggregate) 20 mm (twenty millimetre) nominal size, foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : Eight graded stone aggregate) 40 mm (forty millimetre) nominal size, inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement : Two coarse sand : four graded stone aggregate) 20 mm(twenty millimetre) nominal size finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm (ninety into eighty centimetre) and 45cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38kg (thirty eight kilograme (weight of cover 23 kg (twenty three kilograme) and weight of frame 15 kg) (fifteen kilograme):With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of material in all leads and lifts . The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender