Tender For Construction Of Police Post Building At Dr. Radhakrishnan Medical College, Hamirpur At Jol Sappar, Tehsil Nadaun, District Hamirpur (H.P.) (Sh:- Construction of Building Portion Including Water Supply And Sanitary Installation, Rain Water
Tender Value
1.78 Crore
Estimated cost
Bid Submission
28 Aug 2026
4 days left
EMD
3.56 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Police Post Building At Dr. Radhakrishnan Medical College, Hamirpur At Jol Sappar, Tehsil Nadaun, District Hamirpur (H.P.) (Sh:- Construction of Building Portion Including Water Supply And Sanitary Installation, Rain Water Harvesting Tank, Septic Tank & Site Development) Estimated Cost:-Rs. 17843899.00 Earnest Money:- Rs. 356900.00 Time Limit:- Nine Months
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains for all kinds of soil and ordinary rocks including dressing of sides and ramming of bottoms upto all lifts including getting out the excavated soil and disposal and transportation of surplus excavated soil / unuseful material for disposing at dumping site( to be arranged by the contractor) within all leads and lifts including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 3 | Centering and shuttering including strutting, propping etcetera and removal of form work Foundations, footings, bases for columns complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 4 | Centering and shuttering including strutting, propping etcetera and removal of form work Suspended floors, roofs, landings, balconies and access plat form complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 5 | Centering and shuttering including strutting, propping etcetera and removal of form work Lintels, beams, plinth beams, girders, bressumers and cantilevers complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 6 | Centering and shuttering including strutting, propping etcetera and removal of form work Stairs, (excluding landings) except spiral staircases complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 7 | Centering and shuttering including strutting, propping etcetera and removal of form work Columns, piers, abutments, pillars, posts and struts complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 8 | Centering and shuttering including strutting, propping etcetera and removal of form work Retaining walls, return walls, walls (any thickness) including attached pilasters,buttresses, plinth and string courses fillets, kerbs and steps etc. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 9 | Providing and laying in position cement concrete of specified grade 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level excluding the cost of centering and shuttering including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 10 | Providing and laying damp-proof course 40mm (Forty millimetre) thick with cement concrete 1:2:4 (One cement : Two coarse sand) : Four graded stone aggregate 20mm (twenty millimetre) nominal size complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 11 | Providing and applying a coat of residual petroleum bitumen of grade of VG-10(ten) of approved quality using 1.7 kg ( one point seven kilogram ) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 12 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty newton per square millimetre) with cement contents not not less than @ 360 Per Kilogram/Per cubic metre (at the rate Three Hundred sixty kilogram per cubic metre) or as per approved design mix. All works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 13 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty newton per square millimetre) with cement contents not not less than @ 360 Per Kilogram/Per cubic metre (at the rate Three Hundred sixty kilogram per cubic metre) in beams, suspended floors, roofs having slope up to 15° (Fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 (Indian Standard : Nine thousand one hundred three) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 14 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty newton per square millimetre) with cement contents not not less than @ 360 Per Kilogram/Per cubic metre (at the rate Three Hundred sixty kilogram per cubic metre) walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc All works above plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 (Indian Standard : Nine thousand one hundred three) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 15 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm(six millimetre) thick cement mortar 1:3 (one Cement : three fine sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 16 | Steel reinforcement (TATA /SAIL steel make) for R.C.C. work including straightening, cutting, placing in position and binding all complete work including cost of binding wire upto all floor level Thermo-Mechanically Treated bars of grade Fe-500D ( Five hundred D) or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 17 | Providing and construction of brick work using Second class common burnt clay building bricks in sub structure foudation and plinth in cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 18 | Providing and construction of brick work using Second class common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:6 (One cement : Six sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 19 | Providing and construction of second class half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) in superstructure above plinth up to all floor level in cement mortar 1:4 (One cement : four sand) and curing complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 20 | Supplying and stacking of hard stone (for stone pitching and under flooring ) 22.5cm (twenty two point five centimetre) thick at site including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 21 | Providing and fixing side laminated 19mm (Ninteen) millimetre thick ply wood sheet made of HDMR Kitply/action tess/ century ply water proof termite resistnacew for modular kitchen cupboards including sliding channel, dado hinges, stainless steel stainless kitchen trolly cather stainless steel handle including providing and fixing stainless steel basket and stainless steel sink complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 22 | Providing and fixing 19mm (Nineteen millimetre) Pre-laminated flat pressed three layer (HD HMR) particle board or graded wood particle board IS : 3087 marked, Action tesa,Century Ply ,Green ply,Kit ply make with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 23 | Providing and fixing water proof 6 mm (six millimetre) thick of standard quality ISI (Indian Standard Institute) mark and approved shade and colour in panelling and wall linning including mitring at junctions, butt jointing and nails complete including frame work of 50x50mm (fifty into fifty millimetre) hard wood grid frame work at 600 mm C/C (six hundered millimetre centre to centre) of paneling, complete of Nova pan / Kit ply / National / Archidply / Action Tesa / Green Ply including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 24 | Providing and fixing 1.00mm (one millimetre) thick coloured and decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 (Indian Standard : two thousand forty six) Type S, including cost of adhesive of approved quality including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 25 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm ( eighteen into five millimetre ) fixed with wooden adhesive of approved quality and screws / nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 26 | Providing and fixing 12MM (twelve millimetre) thick phenol bonded (both sides) prelaminated BWP grade particle board (Action Tesa, Greenpanel, and CenturyPly) both side laminated 12mm thick (twelve millimetre) MDF BOARD as per approve shade and sample as per direction of Engineer-in-charge complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 27 | Providing and fixing 35mm ( thirty five millimetre) thick second class Deodar wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessarynscrews, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 28 | Providing and fixing 35 mm ( thirty five millimetre) thick factory pressed laminated BWP (Boiling Water Proof) flush door shutters conforming to relevant IS specifications, including all necessary fittings, fixtures, holdfasts, screws and complete as per direction of Engineer-in-charge complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 29 | Providing and fixing 35 mm ( thirty five thick shutters second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm ( one point four millimetre) in both directions with wire of dia 0.63 mm ( zero point six three millimetre) for doors, windows and clerestory windows with hinges and necessary screws with ISI marked M.S. pressed butt hinges bright finished of required size as per direction of Engineer-in-charge complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 30 | Providing and fixing M.S. grills of required pattern in frames of windows etcetera with M.S. flats, square or round bars including priming coat with approved steel primer all complete Fixed to steel windows by welding as per direction of Engineer-in-charge complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 31 | Providng and fixing fly proof galvanized M.S. wire gauge (Horse fly make or its equivalent) designation 140G (One hundred forty G) with wire of dia 0.71mm (Zero point seven one millimetres) to windows and clerestory windows including 60x20mm ( sixty into twenty millimetre) beading rubber or screws upto all heights as per direction of Engineer-in-charge complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 32 | Providing and fixing 300x16 mm (Three hundred into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 33 | Providing and fixing 250x16 mm (Two hundred fifty into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 34 | Providing and fixing 200x10 mm (Two hundred into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 35 | Providing and fixing150x10 mm (One hundred fifty into ten millimetre) nominal size aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 36 | Providing and fixing 125 mm (One hundred twenty five millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 37 | Providing and fixing 100 mm (one hundred millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 38 | Providing and fixing 150 mm ( one hundred fifty ) bright finished floor Brass Door Stopper with rubber cushion, necessary brass screws etcetra to suit shutter thickness complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 39 | Providing and fixing bright finished brass hard drawn hooks and eyes 150 mm (one hundred fifty millimetre) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 40 | Providing and fixing 150mm ( one hundred fifty millimetre) bright finished brass hasp and staple (safety type) with necessary screws etcetera complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 41 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 42 | Providing and fixing 50 mm (Fifty millimetre) special quality bright finished brass cupboard or ward robe locks (Godrej) with four levers of approved quality including necessary screws etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 43 | Providing and fixing 40 mm ( forty millimetre) special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 44 | Providing and fixing aluminium die cast body tubular type Universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg (Thirty five kilogram) and door width upto 700 mm (Seven hundred millimetre), with necessary accessories and screws etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 45 | Providing and laying 20mm (Twenty millimetre) thick Baroda green granite work in single piece (Table rubbed and Polished) in flooring, treads, steps, landing, skirting and risers 20mm(Twenty millimetre) thick base in cement mortar 1:3 ( One Cement : Three sand) including jointing with cement mortar 1:2 ( One white cement : Two marble dust) with an admixture of pigment to match the shade of the granite Barda green makrana marble within all leads and lifts as directed by the Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 46 | Providing and laying 20mm (Twenty millimetres) thick kota stone 55x55cm (Fifty five into fifty five centimetres) minimum size having one shade only alongwith Jaiselmer yellow marble brands 7.5 (Seven point five) wide as per pattern to detail. Which shall be mirror polished in flooring tread of steps, landings mirror polished of uniform colour laid on 20mm (Twenty millimetres) average thick base of cement mortar 1:4 ( One cement : four coarse sand) laid over and joints with grey cement slurry round with pigment to match the shade of slab including rubbing and polishing complete in all floor level in all heights including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals in pattern finish approved by the Engineer-in-Charge. he rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 47 | Providing and laying matt finished vitrified tiles floor tiles of size 600x600mm (Six hundred into Six hundred millimetre) of 1st quality conforming to IS: 15622 approved make of Orient bell / Kajaria/ RAK / Johnson & Johnson in colours such as white, Ivory, Grey, Fume Red Brown, laid on 20mm (Twenty millimetre) thick cement mortar 1:4 (One cement : four coarse sand), jointing with grey cement slurry @ 3.3kg/sqm (Three point three kilogramme per square metre) including pointing the joints with white cement and matching pigment etcetera complete in pattern finish approved by the Engineer in Charge upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 48 | Providing and laying vitrified floor tiles 600X600 mm (six hundred into six hundred millimetre) ( minimum thickness 10mm ( ten millimetre) with water absorption less than 0.08% (zero point zero eight percent) and conforming to IS: 15622 (Indian Standard: fifteen thousand six hundred twenty two), of approved make (Nitco /Kajaria / Simpolo /Johnson / Somany), in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joints with white cement and matching pigments etcetera, complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 49 | Providing and laying Vitrified tiles in sizes 600X600 mm (six hundred into six hundred millimetre) ( minimum thickness 10mm ( ten millimetre), with water absorption less than 0.08 % (zero point zero eight percent) and conforming to I.S. 15622 (Indian Standard: fifteen thousand six hundred twenty two), of approved make (Nitco /Kajaria / Simpolo /Johnson / Somany), in all colours and shade, in skirting, riser of steps, over 12 mm (twelve millimetre)thick bed of cement mortar 1:3 (One cement: Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square meter) including grouting the joint with white cement and matching pigments etcetera complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 50 | Providing and laying Full Body vetrified tiles (300x300mm) (three hundred into three hundred millimetre) with minimium thickness 10mm ( ten millimetre) in grey/coloured or of approved (Nitco /Kajaria / Simpolo /Johnson / Somany) shade in flooring, treads of steps and landing laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 51 | Providing and fixing 1st (First) quality ceramic glazed floor tiles size in 300x600 (three hundred into six hundred millimetre) with minimium thickness 10mm ( ten millimetre) conforming to IS :15622 (Indian Standard: fifteen thousand six hundred twenty two) of approved make (Nitco /Kajaria / Simpolo /Johnson / Somany) in all colours, shades except burgundy, bottle green, black of any size as approvedby Engineer-in-Charge in skirting, risers of steps and dados over 12 mm (twelve millimetre) thickbed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm (three point three kilogram per square meter) including pointing in white cement mixed with pigment of matching shade complete. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 52 | Structural Steel work riveted, bolted or welded in built up sections (TATA/SAIL/Apollo/JSW Make ) trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 53 | Steel work welded in built up sections/ framed work, (TATA/SAIL/Apollo/JSW Make ) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 54 | Providing and fixing 0.50mm(zero point five zero millimetre) thick prepainted steel sheet of TATA Durashine in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20(twenty) microns over 5 (five)microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm(six millimetre) dia metre with prepainted limpet and rubber washers complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 55 | Providing and fixing Ridges plain 500 - 600mm ( five hundred to six hundred millimetre) precoated galvanised steel sheet of TATA/SAIL/JSW roofing accessories 0.50 mm ( zero point five zero millimetre) (+0.05 %) ( plus zero point zero five percent) total coated thickness, Zinc coating 120 grams ( one hundred twenty gram) per sqm as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns using self drilling/ self tapping screws complete all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 56 | Providing and fixing Crimp curve precoated galvanised steel sheet roofing of TATA/SAIL/JSW accessories 0.50 mm ( zero point five zero millimetre) (+0.05 %) ( Plus zero point zero five percent) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per sqm as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns using self drilling/ self tapping screws complete all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 57 | Providing and Applying two coat of Dr. Fixit using 1.67Kg ( one point six seven kilogram) Dr. Fixit per Sqm to achive from thickness including cleaning the surface through all floor level complete all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 58 | Providing and fixing Flashings/ Aprons Upto 600 mm ( six hundred millimetre) precoated galvanised steel sheet roofing of TATA/SAIL/JSW accessories 0.50 mm ( zero point fifty millimetre) (+0.05 %) ( plus zero point zero five percent) total coated thickness, Zinc coating 120 ( one hundred twenty millimetre) grams per sqm as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns using self drilling/ self tapping screws complete all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 59 | Providing and fixing MS BP Sheet 1.66 mm to 2.00mm (One point sixty six to two millimetres) thick of (TATA/JINDAL/SAIL Make ) in eaves board/ facia/ soffits/ ceiling including cutting fixing and welding to steel roof members and applying a coat of red lead primer complete upto all heights as per instruction of Engineer in Charge ( base members of steel work shall be measured and paid separtely ) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 60 | Providing and fixing glass panes, with putty and nails wherever necessary including racking out the old putty Float glass panes of nominal thickness 6 mm ( six millimetre) weight not less than 10kg/sqm ( ten kilogram per square metre) complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 61 | Providing and fixing MS (mild steel) railing for stair case having balluster of 19x19mm (Nineteen into Nineteen millimetre) square bar with a clear height of 85cm (eighty five centimeter) embedded in cement concrete steps and jointed with a electrical/gas welding at top along with MS (Mild Steel) flat of 40mmx6mm (forty millimetre into six millimetre) size complete with a applying priming coat of red lead paint as per drawing and specification and as per direction of Engineer-in-charge.complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 62 | Providing and fixing Single socketed pipes 150mm (one hundred fifty millimetre) dia of (Supreme/Fenolax/D-plast/ Vectus) make on wall face unplasticised Rigid PVC (Polyvinyl chloride) rain water pipes conforming to IS : 13592 (indian standard : thirteen thousand five hundred ninty two ))Type A, including jointing with seal ring conforming to IS : 5382(indian standard : five thousand three hundred eighty two), leaving 10 mm ( ten millimetre) gap for thermal expansion including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 63 | Providing and plastering 15 mm (fifteen millimetre) thick cement plaster on the rough side of single or half brick wall of mix :1:6 (one cement: six fine sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 64 | Providing and plastering 20 mm (twenty millimetre) thick cement plaster on the fair side of single or half brick wall of mix :1:6 (one cement: six fine sand) above plinth level to all floor level complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 65 | Providing and applying white cement based (Birla White/ J.K ) putty of average thickness 2 mm ( Two millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 66 | Painting with Satin enamel paint of approved brand and manufacture (Asian / Dulux /Berger paints/Nerolac) to give an even shade : Two or more coats on new work complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 67 | Wall painting with acrylic emulsion paint (Asian / Dulux /Berger paints/Nerolac) of approved brand and manufacture to give an even shade :Two or more coats on new work complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 68 | Distempering with 1st (First) quality acrylic Washable distemper (ready mixed) (Asian / Dulux /Berger paints/Nerolac) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 69 | Finishing with Epoxy exterior paint (Asian / Dulux /Berger paints/Nerolac) of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm ( one point six seven litre oblique ten square metre) over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm (at the rate of two point twenty kilogram oblique ten square metre) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 70 | Applying priming coats over wood and wood based surface with primer (Asian / Dulux /Berger paints/Nerolac) of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre ( fifty gram per litre) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 71 | Painting wood work with Deluxe Multi Surface Paint (Asian / Dulux /Berger paints/Nerolac) of required shade. Two or more coat applied @ 0.90 ltr/10 sqm ( zero point nine zero litre per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm ( zero point seven five per ten square metre) of approved brand and manufacture complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 72 | Painting Steel work with Deluxe Multi Surface Paint (Asian / Dulux /Berger paints/Nerolac) to give an even shade Two or more coat applied @ 0.90 ltr/ 10 sqm ( zero point nine zero litre per twn square metre ) over an under coat of primer applied @ 0.80 ltr/ 10 sqm ( zero point eight zero per ten square metre) of approved brand and manufacture complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 73 | Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm ( twenty millimetre) nominal size) over 75mm( seventy five millimetre) thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 74 | P/L 23 ( twenty three ) dia half round ( to level or slop) and joining with stiff mixure of cement mortar 1:1 ( one cement : one course sand) salt glazed stone ware pipe grade A including testing of pipes and joints complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 75 | Providing and laying Red Mandana Stone flooring of approved colour and texture, 20–25 mm ( twenty to twenty five millimetre) thick, over 20 mm ( twenty millimetre) thick cement mortar bed in cement mortar 1:4 ( one cement : four coarse sand) including cutting, dressing, jointing with grey cement slurry, rubbing, polishing and curing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 76 | Providing and laying factory made chamfered edge Cement Concrete paver blocks 60mm (sixty millimetre) thick NTC make , in footpath, parks, lawns, drive ways or light traffic parking etcetera of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick ( fifty millimetre) compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 77 | Providing and laying factory made chamfered edge Cement Concrete paver blocks 80mm (eighty millimetre) thick NTC make in footpath, parks, lawns, drive ways or light traffic parking etcetera of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick ( fifty millimetre) compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 78 | Providing & fixing frosted glass panes 4.00 mm ( four millimetre ) thick with putty and glazing clips in steel doors, windows, clerestory windows, all complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 79 | **Providing and fixing factory-made Glass Reinforced Concrete (GRC) cladding panels of approved design, texture, colour and finish, 25 mm thick, manufactured with alkali-resistant glass fibres, cement and approved additives, having minimum 28 days compressive strength of 40 N/mm², flexural strength of 10 N/mm² and density 2000–2200 kg/m³, of approved make such as Pooja Concrete Fabrication / Unistone or equivalent, fixed over structural members with SS 304 grade stainless steel anchor/fixing system, including drilling, epoxy resin bonding, joint filling with approved non-shrink grout/PU sealant, finishing, scaffolding and all necessary accessories, complete as per manufacturer's specifications, approved drawings and directions of the Engineer-in-Charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 80 | Providing and fixing 3 mm ( three millimetre ) thick ACP sheet ceiling of approved shade in in ceiling etc. complete Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including: (a) Structural analysis and design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm ( four millimetre ) thick aluminium composite panel material consisting of 3mm ( three millimetre ) thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 81 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length Ist class Deodar wood including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 82 | Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm (one point six zero pluse minus zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm (one hundred into eight millimetre) size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etcetra. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etcetra. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. This is including of fly wire mesh, S.S solid square bar grill and double glass unit (DGU)of 20mm (twenty millimetre)thick (6+8+6) (six plus eight plus six) and all fittings / accessories. For uPVC frame, sash and mullion extruded profiles minus 5% (five percent) tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) (three hundred into ninteen into one point nine millimetre) made of (small series) frame 47 x 50 mm (forty seven into fifty millimetre), sash 47 x 68 mm (forty seven into sixty eight millimetre) and mullion 47 x 68 mm (forty seven into sixty eight millimetre) all having wall thickness of 1.9 ± 0.2 mm (one point nine plus minus zero point two millimetre) and single glazing bead of appropriate dimension with necessary screws and accessories etcetra. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 83 | Providing and fixing 12mm (Twelve millimetre) thick toughened glass glazing in doors, windows, ventilators shutters and partitions etcetera with angle etcetera PVC/neoprene gasket etcetera complete as per the architectural drawings and the direction of Engineer-In-Charge (cost of glazing, snap beading shall be paid in basic item) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 84 | WATER SUPPLY & SANITARY INSTALLATION |
| 85 | Providing and fixing white vitreous china pedestal type water closet (European type of CERA,HINDWARE,PARRYWARE, make) with soft closing seat and lid, 10 (ten) litre low level white vitreous china flushing cistern CERA,HINDWARE,PARRYWARE make)and C.P. flush bend with fittings and C.I. brackets, 40 mm ( forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid hindware or cera EWC No 20049 ( twenty thousand forty nine) Snow White Shade complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 86 | Providing and fixing wash basin with C.I. brackets, 15 mm (fifteen millimetre) diametre single hole basin mixer of approved quality and make of Jal/Jaquar/ Parryware/ Hindware) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 630x450 mm ( Six hundred thirty into four hundred fifty millimetre) with a 15 mm ( fifteen millimetre) CP Brass single hole basin mixer of Hindware or Jaquar make (OPAL SERIES) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 87 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of Jaquar/Parryware/Hindware make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 88 | Providing and fixing 32 mm (Thirty two millimetre) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings (Finolex/Supreme make) flexible pipe complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 89 | Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of (Modi Guard/Atul/Cera make) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 90 | Providing and fixing 600x20mm (Six hundered into twenty millimetres) size CP (chromium plated) Brass towel rail of Continental series of Jaquar / Classik series of Hindware /Floral series of Cera / Vintagee series of Kerovite and Hindon series of Jal complete with brackets fixed to wooden cleats with CP (chromium plated) brass screws with concealed fittings arrangement of approved quality and colour including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 91 | Providing and fixing 600x120x5 mm ( six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty millimetre) long screws, rawl plugs etcetraetera complete including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 92 | Providing and fixing PTMT Soap Dish Holder make of Prayag having length of 138mm ( one hundred thirty eight millimetre ), breadth 102mm ( one hundred two millimetre ), height of 75mm ( seventy five millimetre) with concealed fitting arrangements, weighing not less than 106 gms. ( one hundred six gram) of Jaquar/ CZAR/Cera make (OPAL Series) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 93 | Providing and fixing 15mm ( fifteen millimetre) dia C.P.(chroium plated) brass bib cock of approved quality (Jaquar / Hindon series of Jal / ESS (superior or heavy type) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 94 | Providing and fixing C.P. (Chromium plated) brass long body bib cock of approved quality (Jaquar / Hindon series of Jal / ESS (superior or heavy type) conforming to IS (Indian Standard) standards and weighing not less than 690 gms (Six Hundred Ninty grams) .15 mm (Fifteen millimetre) nominal bore complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 95 | Providing and fixing C.P. (Chromium plated) brass stop cock (concealed) of standard design and of approved make (Jaquar / Hindon series of Jal / ESS (superior or heavy type) conforming to IS:8931(Indian standard : Eight thousand Nine hundred thirty one ).15 mm (Fifteen millimetre) nominal bore complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 96 | Providing and fixing uplasticised PVC (Polyvinyl chloride) connection pipe with brass unions 45cm ( Forty five centimetre ) length 15mm (fifteen millimetre) nominal bore Cera/Jaquar/ Finolex / hindware Make complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. Government. |
| 97 | Providing and fixing 15mm (fifteen millimetre) nominal bore ball valve (brass) of approved quality,(Zindal /Tata make) High or low pressure, with plastic floats complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 98 | Providing and fixing 15mm ( fifteen millimetre) Nominal Size brass ferrule with Cast Iron mouth cover including boring and tapping the main complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 99 | Providing and fixing 20mm ( twenty millimetre) Nominal Size brass ferrule with Cast Iron mouth cover including boring and tapping the main complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 100 | Providing and fixing 100mm (One hundered millimetre) diametre chromium plated grating of superior quality for floor, gully or nahani trap complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 101 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm ( five hundred eighty into threee hundred eighty into three hundred fifty millimetre) with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 102 | Providing nad fixing Division plate for urinals 600mmx300mm ( six hundred millimetre into three hundred millimetre) viterious china Cera/Jaquar/ Hindware/Parryware make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 103 | Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1.00 (one point zero zero) metre long with S.S. triangular plate to Eureopean type W.C.(water closet) of quality and make ( Jaquare Opal series) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 104 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. (reinforcement cement concrete) top slab with 1:1.5:3 mix (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate 40 mm (forty millimetre)(one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80cm and 45cm (ninty into eighty into forty five centimeter) deep including C.I. (cast iron) cover with frame (medium duty) 500 mm (five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 38 kg (Thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg(fifteen kilogram)) : With Sewer bricks conforming to IS : 4885 (Indian standred : four thousand eight hundred eight five) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 105 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. (reinforcement cement concrete) top slab with 1:1.5:3 mix (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate 40 mm (forty millimetre)(one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design size 120x90cm (One hundered twenty into ninety centimetre) and 90cm (Ninety centimetre) deep including C.I. cover with frame (light duty) 500 mm (Five hundered millimetre) internal dimensions, total weight of cover and frame to be not less than 116 Per Kilogram (one hunderd sixteen kilograms) (weight of cover 58 Per Kilogram (Fifty eight kilograms) and weight of frame 58 Per Kilogram fifty eight kilograms) With Sewer bricks conforming to IS : 4885 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-In-Charge. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 106 | Providing and fixing 110mm(one hundred ten millimetre) diameter high pressure PVC (poly venyl choloride) spigot and socket, waste and ventilating pipes ISI (Indian Standard institute) marked including fixing with approved brand (Supreme/Fenolax/D-plast/ Vectus) adhesive etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 107 | Providing and fixing 150mm(one hundred fifty millimetre) diameter high pressure PVC (poly venyl choloride) spigot and socket, waste and ventilating pipes ISI (Indian Standard institute) marked including fixing with approved brand (Supreme/Fenolax/D-plast/ Vectus) adhesive etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 108 | Providing and fixing 110mm(one hundred ten millimetre) diameter PVC (Poly venyl choloride) bend 87.5° with oval access door,insertion rubber washer 3mm(three millimetre) thick bolts and nuts ISI(Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 109 | Providing and fixing 150mm(one hundred fifty millimetre) diameter PVC (Poly venyl choloride) bend 87.5° with oval access door,insertion rubber washer 3mm(three millimetre) thick bolts and nuts ISI(Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 110 | Providing and fixing 110x110x110 mm ( one hundred ten into one hundred ten into one hundred ten millimetre) on wall face unplasticised - PVC moulded fittings/ accessories Single tee with door ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 111 | Providing and fixing 150x150x150 mm ( one hundred fifty into one hundred fifty into one hundred fifty millimetre) on wall face unplasticised - PVC moulded fittings/ accessories Single tee with door ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 112 | Providing and fixing 150 mm ( one hundred fifty millimetre) dia PVC Floor trap 100 mm (one hundred millimetre) inlet and 75 mm (seventy five millimetre) outlet trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors , PVC Nahani Trap/Floor Trap with C.P./S.S. grating ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 113 | Providing and fixing 110 mm ( one hundred ten millimetre) dia nominal size PVC Coupler/Socket complete ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 114 | Providing and fixing 110 mm ( one hundred ten millimetre) dia nominal size PVC Coupler/Socket complete ISI (Indian Standards Institute) marked brand (Supreme/Fenolax/D-plast/ Vectus) complete including fixing with approved adhesive etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 115 | Providing and fixing 110 mm ( one hundred millimetre ) dia nominal size rubber ring push-fit joints in PVC pipes complete including fixing with approved adhesive etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 116 | Providing and fixing 150 mm ( one hundred fifty millimetre ) dia nominal size rubber ring push-fit joints in PVC pipes complete including fixing with approved adhesive etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 117 | Providing and fixing 1216 (16mm OD (sixteen millimetre out side dia) ) pipe (Supreme, Finolex and vectus) Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450(indian standard fifteen Thousand four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera, with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 118 | Providing and fixing 1620 (20 mm OD (twenty millimetre out side dia) ) pipe (Supreme, Finolex and vectus) Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS -15450(indian standard fifteen Thousand four hundred fifty), U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature up to 80°C ( eighty degree celsius ) including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers and connectors etcetera, with clamps at 1.00 (one) metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etcetera 20mm (twenty millimetre) nominal size of Kitech make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 119 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Pryag/Sintex/Vectus), IS : 12701(indian standard Twelve thousand seven hundred one) marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 120 | Providing and fixing 100 mm ( one hundred millimetre) M.S. holder bat clamps / pipe clamps for PVC pipes including nuts, bolts, screws and fixing complete complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 121 | Providing and fixing 150 mm ( one hundred fifty millimetre) M.S. holder bat clamps / pipe clamps for PVC pipes including nuts, bolts, screws and fixing complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 122 | Providing and fixing 15mm ( fifteen millimetre) dia pillar Cock with wall flange of approved quality conforming to IS:8931of Jaquar ( CON-047KN) make conforming to IS standards complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 123 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, ( one point five metre) including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm ( twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within all leads Pipes, cables etcetera exceeding 80 mm ( eighty millimetre) dia. But not exceeding 300 mm ( three hundred millimetre) dia complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 124 | Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm ( forty millimetre) nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :100 mm ( one hundred millimetre) diameter S.W. pipe complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 125 | Providing and fixing 1330 mm x 515mm (one thousand three hundred thirty millimetre into five hundred fifteen milimetre ) bowl depth 200mm (Two hundred millimetre) Stainless Steel AISI 304 (18/8) Double bowl Kitchen Sink of Diamond ( DUPLEX 5220 )/Hindware 304 Grade Steel (Glossy Finish), as per IS:13983 with C.I. brackets and stainless steel plug 40mm (Forty millimetre), including painting of fittings and brackets, cutting and making good the walls wherever required complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 126 | Providing and fixing CP brass Towel Ring square with round flange of Jaquar (ACN-CHR-1121N) complete with CP brass brackets fixed to wooden plugs with CP brass screws compete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 127 | Providing and fixing Sink Mixer of Jaquar (FLR- CHR-5309ND) with Swinging Spout (Wall Mounted) With Connecting Legs & Wall Flanges complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . |
| 128 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm ( one hundred millimetre) sand cast Iron P or S trap, 10 ( ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C.pan of size 580x440 mm ( five hundred eighty into four hundred forty) with integral type foot rests Hindware/Cera Universal Pan No. 2071 ( two thousand seventy one) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 129 | Supplying and fixing cast iron cover (C.I.) without frame for manholes size of 60cmx45cm(Sixty centimetre into forty five centimetre) (Light duty) the total weight of cover to be not less than 23kg (twenty three kilogramme) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 130 | Providing and fixing 110 mm (One hundred ten millimetre) diametre unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes (Finolex/ Supreme) by means of 50x50x50mm (fifty into fifty into fifty) millimetre hard wood plugs, screwed with mild steel screws of required length,including cutting brick work and fixing in cement mortar 1:4 ( one cement: four sand) and making good the wall including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 131 | Excavating trenches of required width for pipes, cables, etcetraetera including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m (one point five metre), including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm ( twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etcetra.and disposing of surplus excavated soil as directed, within a lead of 50 m(fifty metre) Pipes, cables etcetraetera not exceeding 80 mm (eighty millimetre) dia including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 132 | Providing and laying 150mm (one hundred fifty millimetre) dia cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) up to haunches of S.W. pipes including bed concrete as per standard design including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 133 | Providing and fixing M.S. foot rests including fixing in manholes with 20x20x10 cm ( twenty into twenty into ten centimetre ) cement concrete blocks 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm ( twenty millimetre) nominal size) as per standard design With 20x20 mm ( twenty into twenty millimetre) square bar including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 134 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains including dressing of sides and ramming of bottoms within all leads including getting out the excavated soil and disposal of surplus excavated soil as directed, within all leads and lifts oridinary rock and all kinds of soil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 135 | Providing and laying in position cement concrete of specified grade including the cost of centering and shuttering 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. |
| 136 | Back filling behind abutment , wing walls and return walls complete as per drawings & MORD technical specification Clause 1204.3.8.granular material as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi, royality, Malkana, toll tax, or other taxes, but excluding GST imposed by Government. . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedAug 28, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysAug 28, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender