Tender For Construction Of (5.40 Mtr. X 3.60 Mtr.) Pump House With Water Supply & Sanitary Arrangement At Ohr Site For Proposed Ground Water Based Uttar Mohanpur Piped Water Supply Scheme To Accommodate functional house hold tap connection In Magraha
Tender Value
6.19 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
15 days left
EMD
12385
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of (5.40 Mtr. X 3.60 Mtr.) Pump House With Water Supply & Sanitary Arrangement At Ohr Site For Proposed Ground Water Based Uttar Mohanpur Piped Water Supply Scheme To Accommodate functional house hold tap connection In Magrahat-Ii Block Under South 24 Parganas W/S Division-I, South 24 Parganas District For Augmentation Of Surface Water Based Water Supply Scheme In The Arsenic Affected Areas Of South 24 Parganas District. (Sm/13781)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including) mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils within a lead of 75.0 mtr. or as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom, bailing out water etc. as required complete. |
| 2 | Depth of excavation not exceeding 1500 mm |
| 3 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. |
| 4 | With earth obtained from excavation of foundation. |
| 5 | Filling in foundation or plinth by Silver Sand in layers not exceeding 150mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. |
| 6 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level, and filling joints with powdered earth or local sand. |
| 7 | Supplying and laying polythene sheet (150gm/ m2) over damp proof course or below flooring or roof terracing or in foundation trenches. |
| 8 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. |
| 9 | a) Pakur Variety |
| 10 | Consider distance 16 km from Baruipur stackyard |
| 11 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 12 | a) Pakur Variety |
| 13 | Consider distance 16 km from Baruipur stackyard |
| 14 | Hire and labour charges for shuttering with centering and necessary staging upto 4mm, using approved scout props and thick hard wood planks of approved thickness with required bracings for concrete slabs, columns, lintels, beams etc. curved or straight, including fitting, fixing and striking out after completion of works (upto roof of ground floor). |
| 15 | a) 25 mm to 30 mm shuttering without staging in foundation |
| 16 | b) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-in-charge. |
| 17 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. |
| 18 | (a) For works in foundation, basement and upto roof of ground floor / upto 4m. |
| 19 | (i) Tor steel/Mild steel |
| 20 | Consider distance 10 km from Nearest stackyard |
| 21 | Brick work with 1st class bricks in cement mortar (1:6) |
| 22 | a) In foundation and plinth. |
| 23 | a) In Superstructure, ground floor. |
| 24 | 125mm thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 25 | Artificial stone in floor, dado, staircase etc. with cement concrete (4:2:1) with stone chips, laid in panels as directed with topping made with ordinary / white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 Kg /Sq.m. all complete including all materials and labour in ground floor. |
| 26 | 3 mm thick topping (High polishing grinding on this item is not permitted) with ordinary cement. |
| 27 | a) 25 mm thick |
| 28 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). |
| 29 | a) Sal - Local |
| 30 | Panel shutter of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings. (If non-supply of single Plank panel rate of reduction 20% wil be made) |
| 31 | a) 35mm thick shutters with 19 mm thick panel |
| 32 | Sishu, Hallack, Champ, Badam |
| 33 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking outs joints or roughening of concrete surface by chamfering etc. including throating, nosing and drip course where necessary (Ground floor).Excluding cost of chipping over concrete surface] |
| 34 | i) With 1:6 cement mortar |
| 35 | a) 15mm thick plaster. |
| 36 | b) 20mm thick plaster. |
| 37 | ii) With 1:4 cement mortar |
| 38 | a) 10mm thick plaster. |
| 39 | Neat Cement punning average 1.5mm thick in wall, dado, window, sills, floor, drain etc. |
| 40 | Making V-groove line (6mm wide, 6mm deep) in plastered surface. |
| 41 | Applying exterior grade acrylic primer of approved quality and brand on plastered surface or concrete surface old or new surface to receive decorative textured ( matt finish ) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface thoroughly, complete as per manufacturer's specification and as per direction of EIC.In Ground Floor |
| 42 | (a) One coats (on new works only) |
| 43 | Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per discation of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of one coat of primer. |
| 44 | In Ground floor |
| 45 | (i) Two Coat |
| 46 | a) Normal Acrylic Emulsion |
| 47 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. |
| 48 | In Ground floor: (i) Two coats. |
| 49 | (a) Priming one coat on steel or other metal surface with synthetic enamel /oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 50 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 51 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of a approved putty etc. on the surface, if necessary. |
| 52 | a) On timber or plastered surface : With other than hi-gloss of approved quality |
| 53 | (i) Two coats with any shade except white. |
| 54 | (b) On steel or other metal surface : With other than hi-gloss of approved quality- |
| 55 | (i) Two coats (with any shade except white) |
| 56 | M.S. or W.I. ornamental grill of approved design, joints continuously welded with M.S. W.I. flats and bars for windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. |
| 57 | (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) |
| 58 | i) Grill weighing above 10 Kg/Sq. m. and upto 16 Kg. / m2 |
| 59 | M.S. Clamp for fixing door and window frames, end bifurcated including curring brick work, fixing in cement concrete with stone chips (4:2:1) fitted and fixed as per direction and mending all damaged complete. |
| 60 | 40mm x 6mm above 170mm upto 250mm. |
| 61 | Iron catch hook of approved quality fitted and fixed to shutter and chowkat. |
| 62 | 6mm x 225mm long |
| 63 | Supplying, fitting, fixing hinged Cleat in position. |
| 64 | With 50mm iron butt hinges. [Local : Sal] |
| 65 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. |
| 66 | 100mm x 50mm x 1.25mm |
| 67 | Iron door ring of approved quality fitted and fixed with nut and washer complete. |
| 68 | (i) 75mm dia. |
| 69 | (ii) 50mm dia. |
| 70 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. |
| 71 | (a) 300mm long. |
| 72 | Iron socket bolt of approved quality fitted and fixed complete. |
| 73 | 150mm long x 10mm dia bolt. |
| 74 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) |
| 75 | (a) For Exposed WorkPVC Pipes |
| 76 | a) 15 mm |
| 77 | b) 20 mm |
| 78 | Supplying, fitting and fixing peet’s valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21Kg./Sq.cm.) |
| 79 | a) 20mm |
| 80 | Supplying, fitting and fixing alloy iron with brass spindle Bib Cock spray-painted tested to 21 kg. per Sq. cm. of approved brand and make. |
| 81 | a) 15mm dia Bid-Cock |
| 82 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 |
| 83 | (i) Single Socketed 3 Meter Length |
| 84 | a) 110 mm |
| 85 | b) Bend 87.5º 110 mm |
| 86 | c)125/110 P Trap with W.C. Ring75 mm |
| 87 | Orissa pattern water closet in white glazed vitreous chainaware of approved make supplied fitted and fixed in position complete excluding P or S trap (excluding cost of concrete for fixing). |
| 88 | i) 580mm x 440mm |
| 89 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling,15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. |
| 90 | i) With Pakur variety. (SAIL/TATA/RINL) |
| 91 | Construction of septic tank of different capacities as per approved drawing with 500mm 375mm thick 1st class brick work (6:1) in cement mortar (thickness of the brick wall will very according to the depth of excavation) bottom of the tank consisting of 100mm thick cement concrete (6:3:1) with stone chips over a layer of brick flat soling with 125mm thick partition wall with cement mortar (3:1), the top of the tank covered with 100mm thick R.C.C. slab (4:2:1) with stone chips with necessary reinforcement and shuttering including 2nos. 560mm dia R.C.C. manhole cover of approved make fitted and fixed in the slab with necessary fittings, 19mm thick cement plaster (4:1) with neat cement finish to the internal surface and 12mm thick cement plaster (4:1) to outside wall upto 200mm below G.L. and 6mm thick cement plaster (4:1) on top of the tank and floor finished with 25mm thick grey art stone including supplying, fitting, fixing all necessary specials, feetings, S.W. tees C.I. foot rest etc. including excavating earth in all sorts of soil, shoring, bailing and pumping out water as necessary ramming, dressing the bed and refilling the side of tank with earth removing spoils, filling up the chamber with clear water after removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. complete in all respect as directed (internal plaster work and a artificial stone flooring is to be done with admixture of water proofing compound @ 5% by weight of cement). |
| 92 | a) For 10 users with 250 mm th. brick work (6:1) (Internal size 2125mm x 900mm x 1300mm height including free board of 300mm). |
| 93 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.(SAIL/TATA/RINL)(Other than SAIL/TATA/RINL) |
| 94 | Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. |
| 95 | (i) 450 mm X 300 mm size |
| 96 | Supplying, fitting and fixing approved brand P.V.C. connector white flexible with both end coupling with heavy brass over C.P. nut 15 mm dia. |
| 97 | a) 750 mm long |
| 98 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 99 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer |
| 100 | (a) 500 litre capacity |
| 101 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 102 | Labour for hoisting plastic water storage tank(i) Upto 1500 litre capacity.(a) Upto 1st story from G.L. |
| 103 | Add GST @ 18% on all items |
| 104 | Add CESS @ 1% on all items (except item no. 11) including GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender