Tender For Construction Of (4.80 Mtr. X 3.66 Mtr.) Pump House With Water Supply & Sanitary Arrangement At 3Rd Tube Well Site Of Shy Ur Part-I Pwss To Accommodate functional house hold tap connection In Mograhat-Ii Block For Augmentation Of Surface Wa
Tender Value
5.88 Lakhs
Estimated cost
Bid Submission
09 Sep 2026
15 days left
EMD
11770
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of (4.80 Mtr. X 3.66 Mtr.) Pump House With Water Supply & Sanitary Arrangement At 3Rd Tube Well Site Of Shy Ur Part-I Pwss To Accommodate functional house hold tap connection In Mograhat-Ii Block For Augmentation Of Surface Water Based W/S Scheme In The Arsenic Affected Areas Of South 24-Pgns District Under W/S Divn-I, Phe Dte. (Sm/14875)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. |
| 2 | (a) Depth of excavation not exceeding 1,500 mm. |
| 3 | Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. |
| 4 | (a) With earth obtained from excavation of foundation. |
| 5 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. |
| 6 | Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand. |
| 7 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 8 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. |
| 9 | a) Pakur Variety |
| 10 | Consider distance 15 km from Baruipur stackyard |
| 11 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. |
| 12 | a) Pakur Variety |
| 13 | Consider distance 15 km from Baruipur stackyard |
| 14 | Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) |
| 15 | (a) 25 mm to 30 mm shuttering without staging in founadtion. |
| 16 | (b) 25 mm. to 30 mm. thick wooden shuttering as per decision & direction of Engineer-in-charge. |
| 17 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. |
| 18 | (a) For works in foundation, basement and upto roof of ground floor / upto 4m. |
| 19 | (i) Tor steel/Mild steel |
| 20 | Consider distance 10 km from Nearest stackyard |
| 21 | Brick work with 1st class bricks in cement mortar (1:6) |
| 22 | (a) In foundation and plinth |
| 23 | (b) In superstructure, ground floor |
| 24 | 125 mm. thick brick work with 1st class bricks in cement mortar (4:1) in ground floor. |
| 25 | Artificial stone in floor, dado, staircase etc with cement concrete (4:2:1) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (2:1) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.In ground floor. |
| 26 | 3 mm. thick topping (High polishing grinding on this item isnot permitted with ordinary cement). |
| 27 | (a) 25 mm. thick |
| 28 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). |
| 29 | (a) Sal : Local. |
| 30 | Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.In ground floor. (In case of non-supply of single plank, penal rate of reduction of 20% will be made) |
| 31 | (a) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm. |
| 32 | (a) Sishu, Champ, Badam, Hallak. |
| 33 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] |
| 34 | (i) With 1:6 cement mortar |
| 35 | (a) 15 mm thick plaster |
| 36 | (b) 20 mm thick plaster |
| 37 | (ii) With 1:4 cement mortar |
| 38 | (a) 10 mm thick plaster |
| 39 | Neat cement punning average 1.5mm thick in wall, dado, window, sills, floor, drain etc. |
| 40 | Making V-groove line ( 6 mm. wide, 6 mm. deep) in plastered surface. |
| 41 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. |
| 42 | In Ground Floor: |
| 43 | (a) One Coat (on new works only) |
| 44 | Protective and Decorative Textured exterior high class matt finish paint of approved quality, composed of special Tharmoplastic Resin containing fine crystalline additives derive from Granite as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. |
| 45 | In Ground Floor: |
| 46 | (i) Two Coat (Normal Acrylic Emulsion) |
| 47 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. |
| 48 | In Ground floor: (i) Two Coats |
| 49 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 50 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 51 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : |
| 52 | (a) On timber or plastered surface : With other than hi-gloss of approved quality- |
| 53 | (i) Two coats with any shade except white |
| 54 | (b) On steel or other metal surface : With other than hi-gloss of approved quality- |
| 55 | (i) Two coats with any shade except white |
| 56 | (a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. |
| 57 | (Add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) |
| 58 | (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 59 | M.S. clamps for fixing door and window frames end bifurcated including curring brick work, fixing in cement concrete with stone chips (4:2:1) fitted and fixed as per direction and mending all damaged complete. |
| 60 | (a) 40mm X 6mm, above 170mm upto 250mm |
| 61 | Iron catch hook of approved quality fitted and fixed to shutter and chowkat. |
| 62 | (a) 6mm dia x 225mm long. |
| 63 | Supplying, fitting and fixing hinge cleat in position. |
| 64 | a) with 50mm iron Butt-hinges. [Local Sal.] |
| 65 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. |
| 66 | a) 100mm. X 50mm. X 1.25mm. |
| 67 | Iron door ring of approved quality fitted and fixed with nut and washer complete. |
| 68 | (i) 75mm dia. |
| 69 | (ii) 50mm dia. |
| 70 | Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. |
| 71 | (i) 300mm long. |
| 72 | Iron socket bolt of approved quality fitted and fixed complete. |
| 73 | (i) 100mm long x 10mm dia bolt. |
| 74 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) |
| 75 | (a) For Exposed Work |
| 76 | PVC Pipes |
| 77 | (i) 15 mm |
| 78 | (ii) 20 mm |
| 79 | Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). |
| 80 | (i) 20 mm |
| 81 | Supplying, fitting and fixing alloy iron with brass spindle bib cock/stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. |
| 82 | (i) 15 mm dia Bid-Cock |
| 83 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 |
| 84 | (i) Single Socketed 3 Meter Length |
| 85 | (i) 110 mm |
| 86 | (ii) Bend 87.5º 110mm |
| 87 | (iii) 125/110 P Trap with W.C. Ring 75mm |
| 88 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (excluding cost of concrete for fixing). |
| 89 | (i) 580 mm X 440 mm |
| 90 | Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1:3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials. |
| 91 | i) With Pakur variety. (SAIL/TATA/RINL) |
| 92 | Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part- I.Payment will be made separetly on the basis of actual height based on relevant I.S.Code. |
| 93 | (i) For 10 users with 250 mm thick brick work (6:1) (Internal Size 2125mm X 900mm X 1300mm height including free board of 300mm) |
| 94 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. |
| 95 | (SAIL/TATA/RINL)(Other than SAIL/TATA/RINL) |
| 96 | Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. |
| 97 | (i) 450 mm X 300 mm size |
| 98 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. |
| 99 | (i) 750 mm long |
| 100 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 101 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer |
| 102 | (i) 500 litre capacity |
| 103 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 104 | Labour for hoisting plastic water storage tank. |
| 105 | (i) Upto 1500 litre capacity.(a) Upto 1st story from G.L. |
| 106 | Add GST @ 18% on all item |
| 107 | Add CESS @ 1% on all items & including GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedSep 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysSep 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender