Tender For Vertical Gardens In Srinagar City.
Tender Value
4.36 Crore
Estimated cost
Bid Submission
08 Sep 2026
9 days left
EMD
8.73 Lakhs
Bank guarantee accepted
Document Fee
5500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Vertical Gardens In Srinagar City.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 25-Aug-2026 | Pre-Bid Meeting | Other | 08-Sep-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 2 | Providing and laying Stone Soling including carriage and as per direction of Engineer In-charge |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 5 | Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete. |
| 6 | Structural steel work in built up sections, trusses and framed work, including hollow pipes of all sizes inc. cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 7 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 8 | Bio wall panel :supply of bio wall panels of size 175mm*520 mm with 3 pots (3-4mm wall thickness) as a module, in black color pots shall have an interior lining of geotextile to keep the holes unclosed,made of durable reinforced plastic of 3-4mm thickness. The potting mix will comprise of sweet garden soil,vermicompost and sand in 1:1:1 to be refilled each year. Panel fitting with 32mm self screw GI chrome . incl Fitting and labour complete job. |
| 9 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability, including waterproofing to make the tank water tight as per direction of Engineer-incharge. |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete l.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for: wall (any thickness )including attached pilasters, buttresses, plinth and string course etc. |
| 12 | Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800(part 1), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire and running charges of all equipment tools plants and machineries required for the job, all complete as per direction of Engineer-in-charge upto 90 m depth below ground level. 28.1.1.1 300 mm dia |
| 13 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of required dia, conforming to IS: 4270 of reputed & approved make, including painted with outside surface with two coats, of anticorrosive paint of approved brand and manufacture including required hire & labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in charge. 28.10.2 150 mm nominal size dia having minimum wall hickness 5.00 mm. |
| 14 | Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded ) FE 410 plain slotted (having slot of size 1.6/3.2 mm) mild steel threaded and socketed/plain bevel ended pipes (type A) of required dia, conforming to IS:8110,of reputed & approved make having wall thickness not less than 5.40mm, including painted with outside surface with two coats, of anticorrosive bitumestic paint of approved brand and manufacture including required hire & labour charges, fitting and accessories, all complete for all depths, as per direction of Engineer-in-charge. 28.11.2 150 nominal size dia |
| 15 | Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tube well as per IS: 2800 (part 1). 28.15.2 150 mm dia |
| 16 | Gravel packing in tube well construction in accordance with IS: 4097, including providing gravel fine/medium/coarse in required grading and sizes as per actual requirement all complete as per direction of Engineer in-charge. |
| 17 | Providing and fixing M.S clamp of required dia to the top of casing/ housing pipe of tube well as per IS:2800 (part 1), including necessary bolts & nuts of required size complete: 28.14.2 150 mm clamp |
| 18 | Development to tube well in accordance with IS: 2800(part 1) and IS:11189 to establish maximum rate of usable water yield without sand content ( beyond permissible limit) with required capacity air compressor, running the compressor for required time till well is fully developed measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well, all complete including required hire & labour charges of air compressor tools & accessories, etc. all, as per direction of Engineer-in-charge. |
| 19 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe removable as per requirement all complete for bore well : 150 mm dia |
| 20 | Supply and installation of plants with dwarf and spreading outdoor plant 1. Flowering Perennials: Heuchera sanguinea (Coral Bells), Primula vulgaris (Primrose), Campanula carpatica (Bellflower), Viola tricolor (Pansy), Dianthus barbatus (Sweet William), Aubrieta deltoidea (Aubrieta), Arabis alpina (Rock Cress), Saxifraga × arendsii (Saxifrage), Chrysanthemum \\"multiflora\\" (Autumn Queen)Gazania. 2. Foliage Plants: Hosta spp. (Plantain Lily), Ajuga reptans (Bugleweed), Bergenia cordifolia (Bergenia), Carex morrowii (Sedge), Festuca glauca (Blue Fescue), Ophiopogon japonicus (Mondo Grass), Liriope muscari (Lily Turf). 3. Trailing and Cascading Plants: Vinca minor (Periwinkle), Sedum spurium (Stonecrop), Lysimachia nummularia (Creeping Jenny), Hedera helix (English Ivy), Lamium maculatum (Spotted Dead Nettle), Cerastium tomentosum (Snow-in-Summer). 4. Ferns for Shaded Vertical Walls: Dryopteris filix-mas (Male Fern), Athyrium filix-femina (Lady Fern), Polystichum setiferum (Soft Shield Fern), Asplenium scolopendrium (Hart's Tongue Fern).5. Succulents for Sunny Vertical Gardens: Sedum acre (Gold Moss Sedum), Sedum album (White Stonecrop), Sempervivum tectorum (Hens and Chicks), Sedum reflexum (Blue Spruce Sedum) etc. as per the requirement and as per the directions of engineer in charge. |
| 21 | Design, engineering, supply, installation, testing and commissioning of complete automatic drip irrigation system on EPC (Engineering, Procurement and Construction) basis from underground water storage tanks (excluding storage tank) up to individual plantation panels/zones, including detailed hydraulic design, preparation of drawings and layouts vetted by competent authority/institutes of national repute including supply and laying of UPVC/HDPE mainlines and sub-mains, supply and fixing of LDPE drip laterals with inline/online emitters of suitable discharge, installation of filtration units, control valves, pressure regulators, air release valves, flush valves, backflow preventers and all required fittings, specials and accessories, complete plumbing works with Supplying, installation, testing & commissioning of 18 no. submersible bore well pump sets for water supply system having of suitable 3 HP, 3 phase 415 volts AC, induction submersible motor directly coupled with solid coupling multi-stage submersible pump discharge capacity of 20000 litre per hr in borewell etc. as required (Make:KSB Model No.BPD242/4A +3HP or similar model in Kirloskar /Crompton including drilling, fixing of 65 mm dia medium class G.I pipe with socket and all necessary Tee, bend, socket in the suction/delivery line including cutting, threading, etc. as required. (Make:TATA/JINDAL) including fixing of holding clamp made out of 50mmx6mm MS flat iron suitable for 65 mm dia G.I pipe as reqd, 65mm G.M. Non Return valve (ISImark) in the suction/delivery line etc.as required. (Make:Zolota/Leader/Sant), 3 core x 4 sq.mm submersible cable (flat cable) of ISI mark in G.I pipe/along the pipe/surface for connection of submersible pump set etc. as required with three phase Submersible pump starter with voltmeter, ammeter (L & T MU-G6) on the wall etc as required, 6mm dia.steel rope along wing G.I pipe for protection of submersible motor pump set as reqd, including fixing of 32mm dia G.I pipe (medium class) in ground or surface for the protection of submersible cable including necessary bend etc as reqd (Make:TATA/Jindal),including earthing using 20mm GI Rod 3 mtr long through GI Strip and Supply, installation , testing and commissioning of 18 no.Monoblock pumps or more as per requirement at site of 1HP Motor of crompton/Havells/Kirloskar make, including Supply, installation,testing and commissioning of 1000mtr or more 4 core 6 sqmm XLPE FRLS Armoured Aluminium Cable including design, supply, installation and commissioning of complete fertigation system comprising fertilizer tank/venturi injector assembly with bypass arrangement, valves and integration with irrigation network, including flushing, pressure testing, trial runs and commissioning of the entire system including operation and comprehensive maintenance and repair of the complete irrigation and fertigation system including all infra structures, plantation, cleaning of tanks, maintenance and repair of all allied infrastructure and fertigation system for a period of two (2) years after successful commissioning. Complete in all respects as per specifications/requirements at site and as directed by Engineer In Charge, for 7 locations as mentioned in RFP.(Complete job). Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Aug 25, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Sep 08, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 9 daysSep 08, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender